Electrical & Ignition

-€23.70

PERFORMANCE MACHINE (PM) Ignition Switch Cover — Matte black, Aluminum

Billet aluminum cover that fits over the existing switch knob. Made in the U.S.A.

€106.61 €130.31

-€212.73

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12 V, Black

Heavy-duty Slugger starter assembled in the U.S.A.; low-profile for easy installation.

€601.18 €813.91

-€16.06

TERRY COMPONENTS Late Starter Output Shaft Gear — Starter Output Shaft, 555160

Quality OEM replacement gear for late starter clutches.

€45.39 €61.45

-€61.61

TERRY COMPONENTS Starter Drive Clutch — 1.5 kW

Comes complete with bearings and drive clutch; fits high-performance and OEM starters.

€174.10 €235.71

-€20.64

TERRY COMPONENTS Starter Brush Holder — 12V

High-quality OEM replacement starter brush holder for reliable starting and long service life.

€58.34 €78.98

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Chrome

Heavy-duty starter assembled in the U.S.A.; superior windings, thicker commutator, high-tolerance clutch, static balanced, low-profile for easy installation.

€516.38 €649.16

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Black

Heavy-duty Slugger starter assembled in the U.S.A.; superior windings and clutch for smoother, more reliable starting. Low-profile for easy installation.

€516.38 €649.16

-€108.72

TERRY COMPONENTS Rebuild Kit — 12V, Unfinished

Rebuild kit for electric reverse motors with all-new components and step-by-step instructions.

€422.81 €531.53

-€152.02

TERRY COMPONENTS 2.0 kW Starter Motor — 12 V, Chrome

High-torque replacement starter with precision-ground components, special lubrication and dyno-tested reliability. Made in the USA.

€591.22 €743.24

$Electronic Throttle Control Extension — 20 cm (8\"), throttle-by-wire, Black$

-€13.06

BARNETT Electronic Throttle Control Extension — 20 cm (8\"),...

Enables easy handlebar height changes on bikes with electronic throttle control. OEM-type connectors for a reliable fit. Made in the USA.

€50.78 €63.84

-€13.11

BARNETT Electronic Throttle Control Extension — 12" cable

Allows easy handlebar height changes on electronic throttle models.
OEM-type connectors for plug-and-play installation.
Made in the USA.

€50.95 €64.06

Dual USB Port Charger with 1" Ball Mount — 48" cable, 2 A, fits 7/8"–1.25" bars, black

-€19.85

GEARS CANADA Dual USB Port Charger with 1" Ball Mount — 48" cable, 2 A,...

Stylish handlebar-mounted charger with dual USB ports and a 1" ball attachment for RAM-style accessories. Includes long battery cable, water-resistant cap with switch, and spacers to fit 7/8", 1" and 1.25" bars.

€56.13 €75.98

Dual USB Port Charger with 1" Ball Mount — 2 A, 48" cable, Chrome, fits 7/8"–1.25" bars

-€19.85

GEARS CANADA Dual USB Port Charger with 1" Ball Mount — 2 A, 48" cable,...

Handlebar mount with two USB ports and a 1" ball for RAM-compatible accessories; water-resistant cap with hidden switch.

€56.13 €75.98

$Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black$

-€4.76

DEI Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black

Professional-grade high-temp shrink tubing with 3:1 shrink ratio; forms a water-tight seal; heat to apply (120–180°F).

€10.45 €15.21

$Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black$

-€29.10

DEI Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black

Professional heat-shrink tubing, 3:1 shrink ratio, water-tight seal and wide operating temperature range.

€64.01 €93.11

$Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black$

-€32.02

DEI Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black

Professional-grade high-temperature shrink tubing with 3:1 shrink ratio, water-tight sealing, and broad operating range for wire and splice protection.

€70.38 €102.40

Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

-€42.47

DEI Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

Professional-grade shrink tubing with 3:1 shrink ratio for water-tight seals; operates from -67°F to 275°F. Apply with heat gun at 120°F–180°F.

€93.38 €135.85

Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

-€62.54

DEI Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

Professional-grade, military-spec polyolefin shrink tubing; 3:1 shrink ratio; seals to 33% of original diameter; operating range -67°F to 275°F; apply heat at 120°F–180°F; Made in USA.

€137.51 €200.05

$Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black$

-€20.21

DEI Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black

Professional-grade polyolefin shrink tubing with 3:1 ratio for wire insulation, strain relief and a water-tight seal across a wide temperature range.

€44.38 €64.59

Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

-€26.57

DEI Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

Professional-grade military-spec polyolefin heat-shrink tubing with 3:1 shrink ratio; protects against dirt, dust and solvents. Operates -67°F to 275°F; apply with a heat gun at 120°F–180°F.

€58.40 €84.97

Cigarette Lighter Socket with Cable Harness — 12V 15A, 160 cm, black

-€3.43

SW-MOTECH Cigarette Lighter Socket with Cable Harness — 12V 15A, 160 cm,...

Sealed cigarette lighter outlet with a fully insulated cable harness and rubber seals. Self-install kit including outlet, harness, safety catch and mounting instructions. Mounting plate sold separately.

€13.38 €16.81

USB Double Charging Socket with Cable Harness — 12V, 2A, Black

-€6.01

SW-MOTECH USB Double Charging Socket with Cable Harness — 12V, 2A, Black

Dual USB charging socket with sealed, insulated cable harness for charging GPS units, cameras, smartphones and tablets. Includes double USB socket, cable harness and mounting instructions. Additional mounting plate required.

€23.40 €29.41

USB Double Charging Socket with Universal Plug — 12 V, 2.1 A, Black

-€6.01

SW-MOTECH USB Double Charging Socket with Universal Plug — 12 V, 2.1 A,...

Dual USB sockets for charging smartphones and accessories; universal plug fits cigarette lighter or vehicle outlet. Angled connector housing. Includes one unit.

€23.40 €29.41

Cigarette Lighter Socket Bracket M8 — Black, M8 screws 40/50 mm

-€3.10

SW-MOTECH Cigarette Lighter Socket Bracket M8 — Black, M8 screws 40/50 mm

Secure mount to attach a cigarette lighter outlet to a bar mount using an M8 screw. Quick installation, flexible alignment; mounting material included.

€12.03 €15.13

-€7.74

SW-MOTECH Universal Electric Kit — 12V 1A, Black

Universal cockpit power supply with cigarette lighter and USB outlets. Mounts to handlebar or fairing; includes mounting plates, screws and fuse.

€30.08 €37.82

-€15.58

TERRY COMPONENTS Starter Solenoid Repair Kit — 12V

Includes plunger assembly, contacts and spring. Made in the USA.

€44.05 €59.63

Starter Drive Clutch — 1.4 kW, P/N 550100

-€30.29

TERRY COMPONENTS Starter Drive Clutch — 1.4 kW, P/N 550100

Comes complete with bearings and drive clutch. Suitable for high-performance or OEM starters.

€117.80 €148.09

-€2.18
Out of Stock

COLONY Magneto Ground Terminal Assembly — Magneto

Secure magneto ground terminal assembly for consistent engine grounding and reliable ignition performance.

€6.16 €8.34

-€22.00
Out of Stock

PERFORMANCE MACHINE (PM) CAN Bus Brake Light Switch Actuator — For Harley-Davidson®, Black

Retains stock brake light function with aftermarket radial master cylinders; compatible with single and dual caliper systems.

€99.01 €121.01

-€22.00
Out of Stock

PERFORMANCE MACHINE (PM) CAN Bus Safety Switch Actuator — Hydraulic clutch, Black

Compatible with CAN Bus systems and retains clutch starter switch interrupt functionality.

€99.01 €121.01

Electrical & Ignition

Contact us

Products

Our company