Electrical & Ignition

Spark Plug — DCPR6E, 12 mm thread, 19.1 mm reach, 16 mm (5/8") hex, 0.9 mm gap

-€3.75

NGK SPARK PLUGS Spark Plug — DCPR6E, 12 mm thread, 19.1 mm reach, 16 mm (5/8")...

Reliable ignition with trivalent plating, alumina silicate insulator, triple seals, corrugated ribs and a copper core for improved heat management.

€4.45 €8.20

Resistor Spark Plug — 19.1 mm reach, 12 mm thread, 16 mm hex, heat range 7

-€5.90

NGK SPARK PLUGS Resistor Spark Plug — 19.1 mm reach, 12 mm thread, 16 mm hex,...

Resistor spark plug with wide heat range to reduce fouling and preignition; high-alumina ceramic, copper core, nickel-alloy tip.

€6.60 €12.50

-€212.73

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12 V, Black

Heavy-duty Slugger starter assembled in the U.S.A.; low-profile for easy installation.

€601.18 €813.91

-€16.06

TERRY COMPONENTS Late Starter Output Shaft Gear — Starter Output Shaft, 555160

Quality OEM replacement gear for late starter clutches.

€45.39 €61.45

-€61.61

TERRY COMPONENTS Starter Drive Clutch — 1.5 kW

Comes complete with bearings and drive clutch; fits high-performance and OEM starters.

€174.10 €235.71

-€20.64

TERRY COMPONENTS Starter Brush Holder — 12V

High-quality OEM replacement starter brush holder for reliable starting and long service life.

€58.34 €78.98

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Chrome

Heavy-duty starter assembled in the U.S.A.; superior windings, thicker commutator, high-tolerance clutch, static balanced, low-profile for easy installation.

€516.38 €649.16

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Black

Heavy-duty Slugger starter assembled in the U.S.A.; superior windings and clutch for smoother, more reliable starting. Low-profile for easy installation.

€516.38 €649.16

-€108.72

TERRY COMPONENTS Rebuild Kit — 12V, Unfinished

Rebuild kit for electric reverse motors with all-new components and step-by-step instructions.

€422.81 €531.53

-€152.02

TERRY COMPONENTS 2.0 kW Starter Motor — 12 V, Chrome

High-torque replacement starter with precision-ground components, special lubrication and dyno-tested reliability. Made in the USA.

€591.22 €743.24

$Electronic Throttle Control Extension — 20 cm (8\"), throttle-by-wire, Black$

-€13.06

BARNETT Electronic Throttle Control Extension — 20 cm (8\"),...

Enables easy handlebar height changes on bikes with electronic throttle control. OEM-type connectors for a reliable fit. Made in the USA.

€50.78 €63.84

-€13.11

BARNETT Electronic Throttle Control Extension — 12" cable

Allows easy handlebar height changes on electronic throttle models.
OEM-type connectors for plug-and-play installation.
Made in the USA.

€50.95 €64.06

$Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black$

-€4.76

DEI Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black

Professional-grade high-temp shrink tubing with 3:1 shrink ratio; forms a water-tight seal; heat to apply (120–180°F).

€10.45 €15.21

$Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black$

-€29.10

DEI Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black

Professional heat-shrink tubing, 3:1 shrink ratio, water-tight seal and wide operating temperature range.

€64.01 €93.11

$Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black$

-€32.02

DEI Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black

Professional-grade high-temperature shrink tubing with 3:1 shrink ratio, water-tight sealing, and broad operating range for wire and splice protection.

€70.38 €102.40

Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

-€42.47

DEI Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

Professional-grade shrink tubing with 3:1 shrink ratio for water-tight seals; operates from -67°F to 275°F. Apply with heat gun at 120°F–180°F.

€93.38 €135.85

Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

-€62.54

DEI Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

Professional-grade, military-spec polyolefin shrink tubing; 3:1 shrink ratio; seals to 33% of original diameter; operating range -67°F to 275°F; apply heat at 120°F–180°F; Made in USA.

€137.51 €200.05

$Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black$

-€20.21

DEI Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black

Professional-grade polyolefin shrink tubing with 3:1 ratio for wire insulation, strain relief and a water-tight seal across a wide temperature range.

€44.38 €64.59

Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

-€26.57

DEI Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

Professional-grade military-spec polyolefin heat-shrink tubing with 3:1 shrink ratio; protects against dirt, dust and solvents. Operates -67°F to 275°F; apply with a heat gun at 120°F–180°F.

€58.40 €84.97

-€17.41

TECHNORESEARCH Data Cable — Harley-Davidson®, Red

Data Cable compatible with TR4 VCMs (Centurion, Maximus and Alaris); required for programming '21 and '22 models.

€25.16 €42.57

3 In 1 OBD TR4 Cable — 4-pin, 6-pin & OBD connectors, fits TR4 VCMs '01–'23, Harley Davidson®

-€27.70

TECHNORESEARCH 3 In 1 OBD TR4 Cable — 4-pin, 6-pin & OBD connectors, fits TR4...

Combines old and newer data port styles. Includes 4-pin, 6-pin and OBD connectors; compatible with '01–'23 models. Made in the USA. For use with TR4 VCMs only.

€107.50 €135.20

-€12.14

TECHNORESEARCH Adapter Cable — 12V, Black

Cable for directly sourcing power between the battery and the TRO controller.

€48.86 €61.00

Security Can Retrieval Cable — 12V, Black, Red

-€12.14

TECHNORESEARCH Security Can Retrieval Cable — 12V, Black, Red

CAN security retrieval cable for upgrading VCM-TR4 dealer pack and Centurion Super Pro Plus; includes fuse and fuse holder. Works only with #3807-0499 and #1020-2851.

€48.86 €61.00

-€4.55

BARKBUSTERS LED Indicator Resistor — LED-RES-001

10 ohm resistor set (2) to correct LED indicator flash rate. Use only with LED Amber Light – Indicator (0635-2280).

€14.55 €19.10

Spark Plug — 14 mm thread, 11.1 mm reach, 0.7 mm gap, heat range 6

-€2.21

NGK SPARK PLUGS Spark Plug — 14 mm thread, 11.1 mm reach, 0.7 mm gap, heat...

High-durability spark plug with trivalent metal plating, alumina silicate insulator, triple seals, corrugated ribs, and copper core for efficient heat removal.

€2.74 €4.95

Iridium IX Spark Plug — 19.1 mm (3/4") reach, 14 mm thread, 1.1 mm gap

-€7.74

NGK SPARK PLUGS Iridium IX Spark Plug — 19.1 mm (3/4") reach, 14 mm thread,...

High-performance iridium spark plug with an ultra-small center electrode to reduce voltage requirements and extend ignition-system life.

€11.61 €19.35

Spark Plug — 19.1 mm reach, 14 mm thread, 20.6 mm hex, 1.1 mm gap, heat range 5

-€2.55

NGK SPARK PLUGS Spark Plug — 19.1 mm reach, 14 mm thread, 20.6 mm hex, 1.1 mm...

Trivalent plating, alumina silicate insulator, triple seals, corrugated ribs and copper core for reliable ignition.

€2.75 €5.30

Iridium IX Spark Plug — BPR6EIX-11, 14 mm thread, 19.1 mm reach, 1.1 mm gap

-€7.93

NGK SPARK PLUGS Iridium IX Spark Plug — BPR6EIX-11, 14 mm thread, 19.1 mm...

Ultimate evolution in spark plug performance with an ultra-small iridium electrode that reduces voltage requirement and extends ignition system life.

€11.77 €19.70

Spark Plug — Thread reach 12.7 mm, Thread size 14 mm, Spark gap 1.1 mm

-€2.61

NGK SPARK PLUGS Spark Plug — Thread reach 12.7 mm, Thread size 14 mm, Spark...

Reliable spark plug with superior corrosion resistance, a strong ceramic insulator, triple seals and a copper core for improved heat control.

€2.64 €5.25

Iridium IX Spark Plug — 14 mm thread, 12.7 mm reach (1/2 in), 0.8 mm gap (0.031 in), heat range 6, BPR6HIX

-€10.82

NGK SPARK PLUGS Iridium IX Spark Plug — 14 mm thread, 12.7 mm reach (1/2 in),...

Industry-leading iridium performance for longer life and reliable ignition.

€11.58 €22.40

Electrical & Ignition

Contact us

Products

Our company