Electrical & Ignition

-€17.76

ANDREWS Supervolt 12 V Ignition Coil — 12V, 30,000V, Black

Original Andrews replacement coil with classic styling and increased spark performance. Made in the U.S.A.

€69.08 €86.84

-€17.76

ANDREWS Supervolt 12 V Ignition Coil — 30,000V, Red

Classic-look replacement ignition coil that boosts spark output and improves throttle response. Made in the U.S.A.

€69.08 €86.84

-€23.70

PERFORMANCE MACHINE (PM) Ignition Switch Cover — Matte black, Aluminum

Billet aluminum cover that fits over the existing switch knob. Made in the U.S.A.

€106.61 €130.31

-€212.73

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12 V, Black

Heavy-duty Slugger starter assembled in the U.S.A.; low-profile for easy installation.

€601.18 €813.91

-€28.43

SPYKE Supertorque Heavy-Duty Starter Drive Clutch — 1.4 kW

Complete starter drive clutch with bearing; direct OEM replacement made in the USA.

€110.57 €139.00

-€22.91

SPYKE Solenoid End Cover Starter Button — 12V, Fits Spyke starters,...

Machined from billet 6160 aluminum with a triple show-chrome finish; unique internally adjustable actuator maintains constant contact as parts wear; usable as primary or backup starter actuation; fits Spyke starters only; made in the USA.

€89.09 €112.00

-€22.91

SPYKE Solenoid End Cover Starter Button — 12V, fits Spyke starters...

Billet-machined end cover with an adjustable actuator for reliable starter engagement.

€89.09 €112.00

-€28.57

SPYKE Starter Jackshaft Kit — 9 teeth

Complete assembly with shaft extension, pinion gear, coupler, spring and clips for direct replacement.

€111.09 €139.66

-€28.57

SPYKE Starter Jackshaft Kit — 10 teeth

Complete starter jackshaft assembly includes shaft extension, pinion gear, coupler, spring and retaining clips.

€111.09 €139.66

-€26.14

SPYKE Heavy-Duty Starter Drive Clutch — Starter Drive, 400011

Complete starter assembly with bearing and drive components; direct OEM replacement, made in the USA.

€101.65 €127.79

-€16.06

TERRY COMPONENTS Late Starter Output Shaft Gear — Starter Output Shaft, 555160

Quality OEM replacement gear for late starter clutches.

€45.39 €61.45

-€61.61

TERRY COMPONENTS Starter Drive Clutch — 1.5 kW

Comes complete with bearings and drive clutch; fits high-performance and OEM starters.

€174.10 €235.71

-€20.64

TERRY COMPONENTS Starter Brush Holder — 12V

High-quality OEM replacement starter brush holder for reliable starting and long service life.

€58.34 €78.98

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Chrome

Heavy-duty starter assembled in the U.S.A.; superior windings, thicker commutator, high-tolerance clutch, static balanced, low-profile for easy installation.

€516.38 €649.16

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Black

Heavy-duty Slugger starter assembled in the U.S.A.; superior windings and clutch for smoother, more reliable starting. Low-profile for easy installation.

€516.38 €649.16

-€9.85

COMP CAMS Fast Start Boost Relay — 12V

Delivers full battery voltage to single-fire coil during cranking. Sealed 30 A unit with high-temp housing. Compact 1.5" x 1" x 1" with mounting flange.

€27.89 €37.74

-€108.72

TERRY COMPONENTS Rebuild Kit — 12V, Unfinished

Rebuild kit for electric reverse motors with all-new components and step-by-step instructions.

€422.81 €531.53

-€152.02

TERRY COMPONENTS 2.0 kW Starter Motor — 12 V, Chrome

High-torque replacement starter with precision-ground components, special lubrication and dyno-tested reliability. Made in the USA.

€591.22 €743.24

$Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black$

-€4.76

DEI Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black

Professional-grade high-temp shrink tubing with 3:1 shrink ratio; forms a water-tight seal; heat to apply (120–180°F).

€10.45 €15.21

$Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black$

-€29.10

DEI Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black

Professional heat-shrink tubing, 3:1 shrink ratio, water-tight seal and wide operating temperature range.

€64.01 €93.11

$Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black$

-€32.02

DEI Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black

Professional-grade high-temperature shrink tubing with 3:1 shrink ratio, water-tight sealing, and broad operating range for wire and splice protection.

€70.38 €102.40

Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

-€42.47

DEI Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

Professional-grade shrink tubing with 3:1 shrink ratio for water-tight seals; operates from -67°F to 275°F. Apply with heat gun at 120°F–180°F.

€93.38 €135.85

Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

-€62.54

DEI Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

Professional-grade, military-spec polyolefin shrink tubing; 3:1 shrink ratio; seals to 33% of original diameter; operating range -67°F to 275°F; apply heat at 120°F–180°F; Made in USA.

€137.51 €200.05

$Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black$

-€20.21

DEI Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black

Professional-grade polyolefin shrink tubing with 3:1 ratio for wire insulation, strain relief and a water-tight seal across a wide temperature range.

€44.38 €64.59

Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

-€26.57

DEI Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

Professional-grade military-spec polyolefin heat-shrink tubing with 3:1 shrink ratio; protects against dirt, dust and solvents. Operates -67°F to 275°F; apply with a heat gun at 120°F–180°F.