Electrical & Ignition

Electrical & Ignition

External Ignition Conversion Kit — Black

-€143.19

DAYTONA TWIN TEC LLC External Ignition Conversion Kit — Black

Replaces heat-sensitive internal nose-cone ignitions with an external 1007EX module; includes harness, sensors, hardware, and instructions.

€556.88 €700.07

USB Interface for Ignition and Fuel Injection Systems — Programming Kit

-€26.54

DAYTONA TWIN TEC LLC USB Interface for Ignition and Fuel Injection Systems —...

USB interface and programming kit for ignition and fuel‑injection systems. Includes ignition module, single‑fire coil, 8.5mm spark plug wires and instructions. Features adjustable advance curves, selectable single/dual‑fire, digital rpm limit, multi‑spark mode and coil short‑circuit protection.

€103.19 €129.73

Timing Rotor — Natural

-€3.11

DAYTONA TWIN TEC LLC Timing Rotor — Natural

Precision timing component that supports accurate spark timing and reduced vibration. Includes mounting screw and washer.

€12.09 €15.20

Internal Ignition System — Black, Gray, 3.0 Ω

-€89.77

DAYTONA TWIN TEC LLC Internal Ignition System — Black, Gray, 3.0 Ω

Programmable internal ignition system with adjustable advance curves, multi‑spark mode, rotary timing controls and coil short‑circuit protection.

€349.14 €438.91

Internal Ignition Kit — Black, Standard

-€114.55

DAYTONA TWIN TEC LLC Internal Ignition Kit — Black, Standard

Programmable internal ignition kit with adjustable advance curves, selectable single/dual-fire modes, digital rpm limiter, 8.5mm spark plug wires and single-fire coil. Made in the U.S.A.

€445.45 €560.00

VT-i Electronic Ignition System — Chrome, Kit

-€58.38

DAYTONA TWIN TEC LLC VT-i Electronic Ignition System — Chrome, Kit

Dual-fire electronic ignition with precise digital rpm limiter and LED status indicator. Fully encapsulated, waterproof, vibration-resistant, and rated to 260°F (125°C). Not for fuel-injected models; for use with mechanical advance systems.

€227.02 €285.40

Single-Fire Coil — 12V, 3.0 ohm, Black

-€26.09

DAYTONA TWIN TEC LLC Single-Fire Coil — 12V, 3.0 ohm, Black

High-output single-fire ignition coil. Compatible with most aftermarket single-fire ignitions. 2.5" o.c. mounting holes for easy fitment.

€101.48 €127.57

Supervolt 12 V Ignition Coil — 12V, 30,000V, Black

-€17.76

ANDREWS Supervolt 12 V Ignition Coil — 12V, 30,000V, Black

Original Andrews replacement coil with classic styling and increased spark performance. Made in the U.S.A.

€69.08 €86.84

Supervolt 12 V Ignition Coil — 30,000V, Red

-€17.76

ANDREWS Supervolt 12 V Ignition Coil — 30,000V, Red

Classic-look replacement ignition coil that boosts spark output and improves throttle response. Made in the U.S.A.

€69.08 €86.84

High-Output Ignition Coil — 12V input, 45,000V output, Black, single-fire

-€26.54

DAYTONA TWIN TEC LLC High-Output Ignition Coil — 12V input, 45,000V output, Black,...

Reliable high-output ignition coil for OEM and aftermarket applications.

€103.19 €129.73

CNC 2-Button Switch — DAYTONA Switch, P/N 80918

-€15.80

DAYTONA CNC 2-Button Switch — DAYTONA Switch, P/N 80918

Compact CNC-aluminum 2-button momentary switch for 22.2 & 25.4 mm handlebars. 12 mm wide, max 50 mA. Wiring can be routed inside or outside the handlebar. Operates VELONA gauges remotely.

€44.66 €60.46

CNC 2-Button Switch for Velona — Width 12mm, 22.2/25.4mm handlebars, 50mA, Chrome

-€16.46

DAYTONA CNC 2-Button Switch for Velona — Width 12mm, 22.2/25.4mm...

CNC aluminum 2-button momentary switch for remote control of VELONA gauges; fits 22.2 and 25.4mm handlebars.

€46.52 €62.98

Horns and Fanfares — 70 mm, 12V

-€2.32

FLOSSER Horns and Fanfares — 70 mm, 12V

Street-legal horns and fanfares with a galvanized finish. Easy to install and fit virtually all bikes.

€6.53 €8.85

Horns and Fanfares — 70 mm (2-3/4") disk horn, 12V

-€2.32

FLOSSER Horns and Fanfares — 70 mm (2-3/4") disk horn, 12V

Street-legal, easy-to-install galvanized horns and fanfares that fit most motorcycles.

€6.53 €8.85

Horns and Fanfares — 91 mm, 12V

-€2.52

FLOSSER Horns and Fanfares — 91 mm, 12V

Street-legal, easy-to-install galvanized horns and fanfares that fit most bikes.

€7.10 €9.62

Horns and Fanfares — 91 mm, High Tone, 12V

-€2.52

FLOSSER Horns and Fanfares — 91 mm, High Tone, 12V

Street-legal, easy-to-install galvanized horns and fanfares that fit virtually all bikes.

€7.10 €9.62

Horns and Fanfares — 91 mm (3-9/16"), 12V

-€4.55

FLOSSER Horns and Fanfares — 91 mm (3-9/16"), 12V

Street-legal horns and fanfares; easy to install and fit virtually all bikes, with a galvanized finish.

€13.32 €17.87

Horns and Fanfares — 12V

-€4.54

FLOSSER Horns and Fanfares — 12V

Street-legal horns and fanfares; easy to install and galvanized for a long-lasting finish.

€12.39 €16.93

Horns and Fanfares — 12V, Black

-€9.77

FLOSSER Horns and Fanfares — 12V, Black

Street-legal horns and fanfares; easy to install; galvanized for a timeless finish.

€27.60 €37.37

Horns and Fanfares — 12V, Chrome

-€11.93

FLOSSER Horns and Fanfares — 12V, Chrome

Street-legal horns and fanfares that are easy to install and galvanized for a lasting finish.

€33.69 €45.62

Horns and Fanfares — 12V, Black

-€10.66

FLOSSER Horns and Fanfares — 12V, Black

Street-legal, galvanized horns and fanfares that fit virtually all bikes—easy to install and built for lasting performance.

€30.14 €40.80

$Electronic Throttle Control Extension — 20 cm (8\"), throttle-by-wire, Black$

-€13.06

BARNETT Electronic Throttle Control Extension — 20 cm (8\"),...

Enables easy handlebar height changes on bikes with electronic throttle control. OEM-type connectors for a reliable fit. Made in the USA.

€50.78 €63.84

Electronic Throttle Control Extension — 12" cable

-€13.11

BARNETT Electronic Throttle Control Extension — 12" cable

Allows easy handlebar height changes on electronic throttle models.
OEM-type connectors for plug-and-play installation.
Made in the USA.

€50.95 €64.06

Relay Socket — 6.3 mm pin

-€0.27

FLOSSER Relay Socket — 6.3 mm pin

Secure terminal interface for common relays. Sold individually or in packs of 10.

€0.76 €1.03

Glass Wedge Bulb Socket — W2.1 x 9.5D

-€0.34

FLOSSER Glass Wedge Bulb Socket — W2.1 x 9.5D

Premium replacement socket for glass wedge bulbs. Sold each.

€0.69 €1.03

Glass Wedge Bulb Socket — W2.1 x 9.5D

-€1.05

FLOSSER Glass Wedge Bulb Socket — W2.1 x 9.5D

Premium quality socket for glass wedge bulbs. Ideal replacement for broken sockets. Sold each.

€2.22 €3.27

Filament Bulbs Sockets — BAY15D

-€0.82

FLOSSER Filament Bulbs Sockets — BAY15D

Premium-quality socket for filament bulbs — durable and easy to install.

€1.73 €2.55

Filament Bulbs Sockets — BA15S

-€0.76

FLOSSER Filament Bulbs Sockets — BA15S

Premium-quality socket for filament bulbs. Durable construction and easy installation for decorative and vintage lighting.

€1.60 €2.36

Fuse Holder — Standard, Black

-€0.33

FLOSSER Fuse Holder — Standard, Black

Holds mini and full-size fuses. Sold individually or in packs of 10. Simple, reliable installation.

€0.68 €1.01

Plug-In Fuses — 1 A, Standard

-€1.42

FLOSSER Plug-In Fuses — 1 A, Standard

Reinforced glass fiber body with copper contacts; available in multiple sizes including miniature. Protects against major electrical damage.

€4.00 €5.42

Showing 1-30 of 103 item(s)

1
2
3
4
Next