Electrical & Ignition

-€143.19

DAYTONA TWIN TEC LLC External Ignition Conversion Kit — Black

Replaces heat-sensitive internal nose-cone ignitions with an external 1007EX module; includes harness, sensors, hardware, and instructions.

€556.88 €700.07

USB Interface for Ignition and Fuel Injection Systems — Programming Kit

-€26.54

DAYTONA TWIN TEC LLC USB Interface for Ignition and Fuel Injection Systems —...

USB interface and programming kit for ignition and fuel‑injection systems. Includes ignition module, single‑fire coil, 8.5mm spark plug wires and instructions. Features adjustable advance curves, selectable single/dual‑fire, digital rpm limit, multi‑spark mode and coil short‑circuit protection.

€103.19 €129.73

-€3.11

DAYTONA TWIN TEC LLC Timing Rotor — Natural

Precision timing component that supports accurate spark timing and reduced vibration. Includes mounting screw and washer.

€12.09 €15.20

-€89.77

DAYTONA TWIN TEC LLC Internal Ignition System — Black, Gray, 3.0 Ω

Programmable internal ignition system with adjustable advance curves, multi‑spark mode, rotary timing controls and coil short‑circuit protection.

€349.14 €438.91

-€114.55

DAYTONA TWIN TEC LLC Internal Ignition Kit — Black, Standard

Programmable internal ignition kit with adjustable advance curves, selectable single/dual-fire modes, digital rpm limiter, 8.5mm spark plug wires and single-fire coil. Made in the U.S.A.

€445.45 €560.00

VT-i Electronic Ignition System — Chrome, Kit

-€58.38

DAYTONA TWIN TEC LLC VT-i Electronic Ignition System — Chrome, Kit

Dual-fire electronic ignition with precise digital rpm limiter and LED status indicator. Fully encapsulated, waterproof, vibration-resistant, and rated to 260°F (125°C). Not for fuel-injected models; for use with mechanical advance systems.

€227.02 €285.40

-€26.09

DAYTONA TWIN TEC LLC Single-Fire Coil — 12V, 3.0 ohm, Black

High-output single-fire ignition coil. Compatible with most aftermarket single-fire ignitions. 2.5" o.c. mounting holes for easy fitment.

€101.48 €127.57

High-Output Ignition Coil — 12V input, 45,000V output, Black, single-fire

-€26.54

DAYTONA TWIN TEC LLC High-Output Ignition Coil — 12V input, 45,000V output, Black,...

Reliable high-output ignition coil for OEM and aftermarket applications.

€103.19 €129.73

-€2.32

FLOSSER Horns and Fanfares — 70 mm, 12V

Street-legal horns and fanfares with a galvanized finish. Easy to install and fit virtually all bikes.

€6.53 €8.85

-€2.32

FLOSSER Horns and Fanfares — 70 mm (2-3/4") disk horn, 12V

Street-legal, easy-to-install galvanized horns and fanfares that fit most motorcycles.

€6.53 €8.85

-€2.52

FLOSSER Horns and Fanfares — 91 mm, 12V

Street-legal, easy-to-install galvanized horns and fanfares that fit most bikes.

€7.10 €9.62

-€2.52

FLOSSER Horns and Fanfares — 91 mm, High Tone, 12V

Street-legal, easy-to-install galvanized horns and fanfares that fit virtually all bikes.

€7.10 €9.62

Horns and Fanfares — 91 mm (3-9/16"), 12V

-€4.55

FLOSSER Horns and Fanfares — 91 mm (3-9/16"), 12V

Street-legal horns and fanfares; easy to install and fit virtually all bikes, with a galvanized finish.

€13.32 €17.87

-€4.54

FLOSSER Horns and Fanfares — 12V

Street-legal horns and fanfares; easy to install and galvanized for a long-lasting finish.

€12.39 €16.93

-€9.77

FLOSSER Horns and Fanfares — 12V, Black

Street-legal horns and fanfares; easy to install; galvanized for a timeless finish.

€27.60 €37.37

-€11.93

FLOSSER Horns and Fanfares — 12V, Chrome

Street-legal horns and fanfares that are easy to install and galvanized for a lasting finish.

€33.69 €45.62

-€10.66

FLOSSER Horns and Fanfares — 12V, Black

Street-legal, galvanized horns and fanfares that fit virtually all bikes—easy to install and built for lasting performance.

€30.14 €40.80

$Electronic Throttle Control Extension — 20 cm (8\"), throttle-by-wire, Black$

-€13.06

BARNETT Electronic Throttle Control Extension — 20 cm (8\"),...

Enables easy handlebar height changes on bikes with electronic throttle control. OEM-type connectors for a reliable fit. Made in the USA.

€50.78 €63.84

-€13.11

BARNETT Electronic Throttle Control Extension — 12" cable

Allows easy handlebar height changes on electronic throttle models.
OEM-type connectors for plug-and-play installation.
Made in the USA.

€50.95 €64.06

$Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black$

-€4.76

DEI Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black

Professional-grade high-temp shrink tubing with 3:1 shrink ratio; forms a water-tight seal; heat to apply (120–180°F).

€10.45 €15.21

$Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black$

-€29.10

DEI Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black

Professional heat-shrink tubing, 3:1 shrink ratio, water-tight seal and wide operating temperature range.

€64.01 €93.11

$Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black$

-€32.02

DEI Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black

Professional-grade high-temperature shrink tubing with 3:1 shrink ratio, water-tight sealing, and broad operating range for wire and splice protection.

€70.38 €102.40

Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

-€42.47

DEI Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

Professional-grade shrink tubing with 3:1 shrink ratio for water-tight seals; operates from -67°F to 275°F. Apply with heat gun at 120°F–180°F.

€93.38 €135.85

Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

-€62.54

DEI Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

Professional-grade, military-spec polyolefin shrink tubing; 3:1 shrink ratio; seals to 33% of original diameter; operating range -67°F to 275°F; apply heat at 120°F–180°F; Made in USA.

€137.51 €200.05

$Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black$

-€20.21

DEI Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black

Professional-grade polyolefin shrink tubing with 3:1 ratio for wire insulation, strain relief and a water-tight seal across a wide temperature range.

€44.38 €64.59

Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

-€26.57

DEI Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

Professional-grade military-spec polyolefin heat-shrink tubing with 3:1 shrink ratio; protects against dirt, dust and solvents. Operates -67°F to 275°F; apply with a heat gun at 120°F–180°F.