Electrical & Ignition

-€16.06

TERRY COMPONENTS Late Starter Output Shaft Gear — Starter Output Shaft, 555160

Quality OEM replacement gear for late starter clutches.

€45.39 €61.45

-€61.61

TERRY COMPONENTS Starter Drive Clutch — 1.5 kW

Comes complete with bearings and drive clutch; fits high-performance and OEM starters.

€174.10 €235.71

-€20.64

TERRY COMPONENTS Starter Brush Holder — 12V

High-quality OEM replacement starter brush holder for reliable starting and long service life.

€58.34 €78.98

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Chrome

Heavy-duty starter assembled in the U.S.A.; superior windings, thicker commutator, high-tolerance clutch, static balanced, low-profile for easy installation.

€516.38 €649.16

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Black

Heavy-duty Slugger starter assembled in the U.S.A.; superior windings and clutch for smoother, more reliable starting. Low-profile for easy installation.

€516.38 €649.16

-€108.72

TERRY COMPONENTS Rebuild Kit — 12V, Unfinished

Rebuild kit for electric reverse motors with all-new components and step-by-step instructions.

€422.81 €531.53

-€152.02

TERRY COMPONENTS 2.0 kW Starter Motor — 12 V, Chrome

High-torque replacement starter with precision-ground components, special lubrication and dyno-tested reliability. Made in the USA.

€591.22 €743.24

Heat-Shrink Solderless Wire Connector Kit/Refill — 12–10, 16–14, 22–18, 26–24 AWG, assorted colors

-€8.46

K&S TECHNOLOGIES Heat-Shrink Solderless Wire Connector Kit/Refill — 12–10,...

No soldering gun required; low-heat solder activates with a heat gun to create a watertight shrink seal. Packs come in a clear jar with barcode-labeled packs for easy counter or service use.

€23.84 €32.30

Solderless Wire Connectors — 20-pack, White

On sale!
-€10.94

K&S TECHNOLOGIES Solderless Wire Connectors — 20-pack, White

Solderless splices using low-heat solder that melts with a heat gun and creates a watertight shrink-tube seal.

€30.91 €41.85

$Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black$

On sale!
-€3.11

DEI Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black

Professional-grade high-temp shrink tubing with 3:1 shrink ratio; forms a water-tight seal; heat to apply (120–180°F).

€12.10 €15.21

$Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black$

On sale!
-€19.06

DEI Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black

Professional heat-shrink tubing, 3:1 shrink ratio, water-tight seal and wide operating temperature range.

€74.05 €93.11

$Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black$

On sale!
-€20.97

DEI Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black

Professional-grade high-temperature shrink tubing with 3:1 shrink ratio, water-tight sealing, and broad operating range for wire and splice protection.

€81.43 €102.40

Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

On sale!
-€27.82

DEI Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

Professional-grade shrink tubing with 3:1 shrink ratio for water-tight seals; operates from -67°F to 275°F. Apply with heat gun at 120°F–180°F.

€108.03 €135.85

Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

On sale!
-€40.96

DEI Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

Professional-grade, military-spec polyolefin shrink tubing; 3:1 shrink ratio; seals to 33% of original diameter; operating range -67°F to 275°F; apply heat at 120°F–180°F; Made in USA.

€159.09 €200.05

Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

On sale!
-€17.40

DEI Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

Professional-grade military-spec polyolefin heat-shrink tubing with 3:1 shrink ratio; protects against dirt, dust and solvents. Operates -67°F to 275°F; apply with a heat gun at 120°F–180°F.

€67.57 €84.97

-€15.58

TERRY COMPONENTS Starter Solenoid Repair Kit — 12V

Includes plunger assembly, contacts and spring. Made in the USA.

€44.05 €59.63

Starter Drive Clutch — 1.4 kW, P/N 550100

-€30.29

TERRY COMPONENTS Starter Drive Clutch — 1.4 kW, P/N 550100

Comes complete with bearings and drive clutch. Suitable for high-performance or OEM starters.

€117.80 €148.09

-€2.16

K&S TECHNOLOGIES 12V Economy Horn — 12V, 69.9 mm, Black

Compact electric horn that adds style and safety and mounts almost anywhere.

€6.10 €8.26

-€2.14

K&S TECHNOLOGIES 12V Economy Horn — 69.9 mm (2-3/4"), Chrome

Add style and safety to your bike. Sized to mount almost anywhere.

€6.03 €8.17

CANsmart™ Controller GEN II V-Twin — Black, Harley Davidson®

-€80.55

DENALI CANsmart™ Controller GEN II V-Twin — Black, Harley Davidson®

Advanced CANsmart™ lighting controller for V-Twin bikes. Modulate, flash-to-pass, high/low sync, two-channel dimming, Smart Brake, and switched accessory power. Plug-and-play installation.

€219.41 €299.96

-€2.33

K&S TECHNOLOGIES Spark Plug Cap — 14 mm, terminal nut, 90°, Black

Includes resistor cover and both end rubber caps for secure insulation and terminal protection.

€6.57 €8.90

-€34.91

TERRY COMPONENTS Solenoid End Cover with Starter Button — 1.4 kW, Chrome

Replacement solenoid end cover with integrated starter button. Installs in minutes with OEM hardware. Made in the USA.

€135.74 €170.65

-€111.44

TERRY COMPONENTS Starter Motor — 12V, 1.2 kW, Chrome

Nippondenso starter assembled in the U.S.A.; heavy-duty components, precision clutch parts, and dyno-tested for reliable performance.

€433.38 €544.82

-€36.14

TERRY COMPONENTS Solenoid End Cover with Starter Button — 1.8 kW, Chrome

Replaces the original end cover and installs in minutes with factory hardware.

€140.58 €176.72

-€36.14
Out of Stock

TERRY COMPONENTS Solenoid End Cover with Starter Button — Black, 1.8 kW

Replaces the OEM end cover and serves as a primary or auxiliary starter button. Installs in minutes with OEM hardware. Made in the USA.

€140.58 €176.72

-€36.14

TERRY COMPONENTS Solenoid End Cover with Starter Button — Chrome

Quick bolt-on solenoid end cover with starter button that replaces the OEM end cover and installs with OEM hardware.

€140.58 €176.72

-€36.14

TERRY COMPONENTS Solenoid End Cover with Starter Button — Black, Billet...

Replaces the OEM end cover; serves as primary or auxiliary starter button; installs in minutes with OEM hardware; made in the USA.

€140.58 €176.72

-€39.43

TERRY COMPONENTS Loaded Starter Solenoid Body — 12 V, Chrome

Complete loaded solenoid body with preinstalled contacts, plunger, cover and switch terminal; fits 1.2, 1.4, 1.6 and 1.8 kW high-torque aftermarket starter motors.

€153.34 €192.77

-€12.86

TERRY COMPONENTS Starter Solenoid Cover — 12V, Chrome

Protective starter solenoid cover constructed from chrome-plated steel for durability and corrosion resistance.

€50.00 €62.86

-€11.87

TERRY COMPONENTS Starter Solenoid Cover — 12V, Chrome

Chrome-plated steel cover protects the starter solenoid; durable and easy to install.

€46.15 €58.02

Electrical & Ignition

Contact us

Products

Our company