Electrical & Ignition

Mo-Can Data Bus Adapter — 38 mm × 19 mm × 13 mm

-€7.56

MOTOGADGET Mo-Can Data Bus Adapter — 38 mm × 19 mm × 13 mm

Digital data bus adapter that reads vehicle speed, engine speed and MIL from the vehicle data bus by H-D. No extra sensors required. Vibration and weather resistant. Electronics protected against voltage peaks. Complies with SAE. 38 mm × 19 mm × 13 mm; approx. 36 g.

€75.68 €83.24

-€143.19

DAYTONA TWIN TEC LLC External Ignition Conversion Kit — Black

Replaces heat-sensitive internal nose-cone ignitions with an external 1007EX module; includes harness, sensors, hardware, and instructions.

€556.88 €700.07

Mo-Relay — 19 mm diameter, 19 mm height, 12V

-€2.21

MOTOGADGET Mo-Relay — 19 mm diameter, 19 mm height, 12V

Small, waterproof relay that routes high current to devices, reduces voltage drop and simplifies switch wiring. CNC-machined and easy to install.

€22.16 €24.37

Mo-Stop Digital Brake Light Modulator — MOTOGADGET mo-STOP, P/N 4000020

-€3.75

MOTOGADGET Mo-Stop Digital Brake Light Modulator — MOTOGADGET mo-STOP,...

Adjustable digital brake light controller — six selectable modes.
Also works as a standard flasher relay or with automatic switch-off.
Compatible with most LED and conventional brake lights.
Watertight, vibration-resistant and overload protected; easy installation.

€37.43 €41.18

-€4.85

NAMZ Intensifier High-Low Module III — 12V, High/Low

Converts single-function LED bulbs into dual-function units for run/stop, run/turn or high/low use. Universal LED fitment up to 500 mA. Not compatible with incandescent or halogen bulbs. Made in the U.S.A.

€18.86 €23.71

-€46.02

NAMZ Run, Brake and Turn Signal Module — 12 V, Black

Converts turn signals into running and brake lights while retaining turn function. Built-in load equalizer handles stock and small custom LEDs. Plug-in connectors and simple instructions for select models. Increases rear visibility. Made in the USA.

€138.05 €184.07

USB Interface for Ignition and Fuel Injection Systems — Programming Kit

-€26.54

DAYTONA TWIN TEC LLC USB Interface for Ignition and Fuel Injection Systems —...

USB interface and programming kit for ignition and fuel‑injection systems. Includes ignition module, single‑fire coil, 8.5mm spark plug wires and instructions. Features adjustable advance curves, selectable single/dual‑fire, digital rpm limit, multi‑spark mode and coil short‑circuit protection.

€103.19 €129.73

-€3.11

DAYTONA TWIN TEC LLC Timing Rotor — Natural

Precision timing component that supports accurate spark timing and reduced vibration. Includes mounting screw and washer.

€12.09 €15.20

-€89.77

DAYTONA TWIN TEC LLC Internal Ignition System — Black, Gray, 3.0 Ω

Programmable internal ignition system with adjustable advance curves, multi‑spark mode, rotary timing controls and coil short‑circuit protection.

€349.14 €438.91

-€114.55

DAYTONA TWIN TEC LLC Internal Ignition Kit — Black, Standard

Programmable internal ignition kit with adjustable advance curves, selectable single/dual-fire modes, digital rpm limiter, 8.5mm spark plug wires and single-fire coil. Made in the U.S.A.

€445.45 €560.00

VT-i Electronic Ignition System — Chrome, Kit

-€58.38

DAYTONA TWIN TEC LLC VT-i Electronic Ignition System — Chrome, Kit

Dual-fire electronic ignition with precise digital rpm limiter and LED status indicator. Fully encapsulated, waterproof, vibration-resistant, and rated to 260°F (125°C). Not for fuel-injected models; for use with mechanical advance systems.

€227.02 €285.40

-€26.09

DAYTONA TWIN TEC LLC Single-Fire Coil — 12V, 3.0 ohm, Black

High-output single-fire ignition coil. Compatible with most aftermarket single-fire ignitions. 2.5" o.c. mounting holes for easy fitment.

€101.48 €127.57

High-Output Ignition Coil — 12V input, 45,000V output, Black, single-fire

-€26.54

DAYTONA TWIN TEC LLC High-Output Ignition Coil — 12V input, 45,000V output, Black,...

Reliable high-output ignition coil for OEM and aftermarket applications.

€103.19 €129.73

-€11.38

MOTOGADGET mo.lock NFC Lock — 8V–18V, 32 mm transmitter diameter

Compact NFC digital ignition lock replacing mechanical ignition; battery-free 30 mm keys, 40 A relay, 8V–18V, 32 mm transmitter diameter.

€113.83 €125.21

mo.lock NFC Wiring Harness — MOTOGADGET Wiring Harness Kit, PN 4002011

-€5.62

MOTOGADGET mo.lock NFC Wiring Harness — MOTOGADGET Wiring Harness Kit, PN...

Complete pre-assembled wiring harness for mo.lock NFC with 150 cm mo.lock cable and integrated 40A fuse.

€56.23 €61.85

-€1.54

MOTOGADGET mo.lock NFC Connection Cable — MOTOGADGET, 4002012

High-quality 2 m, 3-wire connection cable for mo.lock NFC. Fits the included cable cover.

€15.49 €17.03

-€3.98

NAMZ Mini Toggle Switch — 5 A, Chrome

Compact toggle switch that fits a 1/4" mounting hole; made in the U.S.A.

€11.94 €15.92

-€3.24

NAMZ Mini Toggle Switch — 5 A, Chrome

Compact toggle switch. Mounts in a 1/4" hole. Made in the U.S.A.

€9.70 €12.94

-€3.24

NAMZ Speedometer/Tripometer Reset Push Button — Black

Compact reset button for speedometer and trip meter. Durable construction, easy installation. Made in the U.S.A.

€9.70 €12.94

-€3.57

NAMZ Rubber Reset Switch Boots — 5-pack, Black

Protects control actuators from moisture, dust and debris. Flexible design for reliable actuation and simple installation.

€10.70 €14.27

-€1.20

MOTOGADGET Compact Push-Button — 12 mm diameter, 22.7 mm length, Black

Compact, water- and vibration-resistant push-button with ergonomic feedback for reliable instrument control.

€12.07 €13.27

-€1.20

MOTOGADGET Compact Push-Button — 12 mm diameter, 22.7 mm length, Model M1²

Compact push-button with water and vibration resistance and ergonomic feedback for instrument control.

€12.07 €13.27

Method Ignition Switch Cover — Black anodized, fits Road Glide® with Arlen Ness Method® billet top or triple tree

-€28.67

ARLEN NESS Method Ignition Switch Cover — Black anodized, fits Road...

CNC-machined ignition switch cover for Road Glide® models; installs over the factory switch and retains factory operation.

€111.50 €140.17

Method Ignition Switch Cover — Chrome, fits Harley-Davidson Road Glide with Method Billet Top Tree/Triple Tree

-€33.91

ARLEN NESS Method Ignition Switch Cover — Chrome, fits Harley-Davidson...

CNC-machined ignition switch cover that installs over the factory switch to provide a custom look while preserving factory function; for Road Glide models using Method top tree or triple tree kits.