Electrical & Ignition

2000I PC Programmable Electronic Ignition Kit — DYNATEK, Dyna 2000 Series, D2KI-1P

-€57.03

DYNATEK-HARLEY 2000I PC Programmable Electronic Ignition Kit — DYNATEK, Dyna...

Self-contained PC-programmable ignition module with single- or dual-fire modes, ten advance curves, adjustable over-rev protection and comprehensive data logging.

€221.77 €278.80

Dyna 2000TC Programmable Digital Performance Ignition Module — Black

-€64.08

DYNATEK-HARLEY Dyna 2000TC Programmable Digital Performance Ignition Module —...

Single-fire, fully programmable ignition with 16 advance curves, 8 rev limiter settings, PC programmability, coil-current monitoring and data logging; made in USA.

€249.24 €313.32

2000-HDE PC-Programmable Digital Ignition Module — Dyna 2000 Series, 8-pin, black

-€52.64

DYNATEK-HARLEY 2000-HDE PC-Programmable Digital Ignition Module — Dyna 2000...

PC-programmable microcomputer ignition module with four advance curves and four rev limiter settings (6000–7500 rpm). Separate tach output and diagnostic LED. Not for fuel-injected models.

€204.72 €257.36

-€57.22

DYNATEK-HARLEY Dyna 2000TC-3 Digital Performance Ignition Module — Black

Digital performance unit with 16 advance curves, adjustable rev limiter (5,750–7,500 rpm), and single‑connector installation. Made in the U.S.A.

€222.51 €279.73

-€57.03

DYNATEK-HARLEY Dyna 2000TC-3 Digital Performance Ignition Module — Black

Digital performance ignition module with 16 advance curves and an adjustable rev limiter from 5,750–7,500 rpm.

€221.77 €278.80

Ignition Booster Module — Mechanical (Points), Single-point, Black

-€45.37

DYNATEK Ignition Booster Module — Mechanical (Points), Single-point,...

Converts inconsistent surges into controlled bursts for stronger ignition, reduces current to 0.1 amp to prevent burned points, and delivers a 50% faster spark voltage rise.

€143.17 €188.54

-€4.29

S&S CYCLE Ignition Rotor — 55-1247, Tan

High-quality OEM replacement component; includes bolt and washer for easy installation.

€16.72 €21.01

-€82.00

S&S CYCLE HI-4N Ignition Module — Gray

Combination single- and dual-fire ignition module with sealed all-metal housing, timing marks on the flange, advanced sensor magnets, and four rotary switches. Not for fuel-injected models.

€318.90 €400.90

-€112.75

S&S CYCLE HI-4N Ignition Kit — Black, Gray

Updated Crane HI-4 design with single- and dual-fire modes, improved heat dissipation, sealed electronics, and four rotary switches for tuning. Not for fuel-injected models.

€438.49 €551.24

-€38.91

DYNATEK-HARLEY Miniature Series Coil — 12V, 3.0Ω, dual-plug

High-output miniature coil for Dyna 2000/3000 and dwell-control ignitions. Secondary resistance 11.5 ohms. Not for Twin Cam or Dyna "S"/DYNA III and earlier.

€151.32 €190.23

-€38.95

S&S CYCLE 3 Ohm High-Output Single-Fire Ignition Coil — 12 V, Black

High-output single-fire ignition coil: two coils in one package. Works with single-fire systems. Made in the USA.

€151.45 €190.40

-€38.92

DYNATEK 0.5 Ohm Miniature Coil — 12V, Black, Pair

Designed for Dyna TC88 series and factory electronic ignitions that require low-resistance coils. Not for use with ignitions not engineered for low-resistance coils.

€122.80 €161.72

-€38.91

DYNATEK-HARLEY Dual-Output Coil — 12V, Black

Reliable dual-output ignition coil engineered for aftermarket and OEM systems; made in the USA.

€151.32 €190.23

-€2.60

POWERMADD E3 Resistor Spark Plug — 14 mm thread, 19.1 mm reach, 20.6 mm hex

Diamond Fire electrode design yields faster, more complete combustion for improved engine performance.

€7.35 €9.95

-€2.60

POWERMADD E3 Resistor Spark Plug — 12 mm, 19.1 mm reach

Unique Diamond Fire electrode shape for faster ignition, more complete combustion, and improved engine performance.

€7.35 €9.95

E3 Resistor Spark Plug — Thread Reach 19.1 mm (3/4 in), Thread Size 10 mm, Hex 16 mm (5/8 in), Heat Range 8

-€2.86

POWERMADD E3 Resistor Spark Plug — Thread Reach 19.1 mm (3/4 in), Thread...

Diamond Fire electrode design for faster, more complete combustion and improved engine performance.

€8.08 €10.94

-€6.24

S&S CYCLE Oil Pressure Switch — 31-2016

Monitors engine oil pressure; comes complete with nut and lock washer. Made in the U.S.A.

€24.34 €30.58

-€15.80

DAYTONA CNC 2-Button Switch — DAYTONA Switch, P/N 80918

Compact CNC-aluminum 2-button momentary switch for 22.2 & 25.4 mm handlebars. 12 mm wide, max 50 mA. Wiring can be routed inside or outside the handlebar. Operates VELONA gauges remotely.

€44.66 €60.46

-€16.46

DAYTONA CNC 2-Button Switch for Velona — 12mm width, fits 22.2/25.4mm...

Compact CNC aluminum 2-button momentary switch for remote Velona gauge control. 12mm width; fits 22.2mm and 25.4mm handlebars. Max 50mA.

€46.52 €62.98

-€9.85

COMP CAMS Fast Start Boost Relay — 12V

Delivers full battery voltage to single-fire coil during cranking. Sealed 30 A unit with high-temp housing. Compact 1.5" x 1" x 1" with mounting flange.

€27.89 €37.74

$Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black$

-€4.76

DEI Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black

Professional-grade high-temp shrink tubing with 3:1 shrink ratio; forms a water-tight seal; heat to apply (120–180°F).

€10.45 €15.21

$Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black$

-€29.10

DEI Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black

Professional heat-shrink tubing, 3:1 shrink ratio, water-tight seal and wide operating temperature range.

€64.01 €93.11

$Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black$

-€32.02

DEI Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black

Professional-grade high-temperature shrink tubing with 3:1 shrink ratio, water-tight sealing, and broad operating range for wire and splice protection.

€70.38 €102.40

Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

-€42.47

DEI Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

Professional-grade shrink tubing with 3:1 shrink ratio for water-tight seals; operates from -67°F to 275°F. Apply with heat gun at 120°F–180°F.

€93.38 €135.85

Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

-€62.54

DEI Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

Professional-grade, military-spec polyolefin shrink tubing; 3:1 shrink ratio; seals to 33% of original diameter; operating range -67°F to 275°F; apply heat at 120°F–180°F; Made in USA.

€137.51 €200.05

$Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black$

-€20.21

DEI Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black

Professional-grade polyolefin shrink tubing with 3:1 ratio for wire insulation, strain relief and a water-tight seal across a wide temperature range.

€44.38 €64.59

Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

-€26.57

DEI Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

Professional-grade military-spec polyolefin heat-shrink tubing with 3:1 shrink ratio; protects against dirt, dust and solvents. Operates -67°F to 275°F; apply with a heat gun at 120°F–180°F.

€58.40 €84.97

-€3.94

DAYTONA Sensors — 120 cm (47-1/4 in), P/N 84851

Temperature sensor with external wire and waterproof connectors for reliable operation in wet environments.

€11.14 €15.08

-€9.87

DAYTONA Sensors — DAYTONA, 87170

External wire and waterproof connectors for reliable, weather-resistant performance.

€27.90 €37.77

-€11.85

DAYTONA Sensors — P/N 92333

Sensors with external wiring and waterproof connectors for reliable signal transmission.

€33.49 €45.34

Electrical & Ignition

Contact us

Products

Our company