Body & Frame (12)

Sidestand Foot Extension — anodized finish

-€9.46

SW-MOTECH Sidestand Foot Extension — anodized finish

Large sidestand foot extension that increases stability on soft or uneven ground; bolt-on installation to the original sidestand with three screws.

€36.76 €46.22

Thicky Front Fender — 21" wheel, 110/90-B19, natural finish

-€85.47

PAUL YAFFE BAGGER NATION Thicky Front Fender — 21" wheel, 110/90-B19, natural finish

Redesigned with lengthened front and rear, squared ends and thicker sidewalls; one-piece 14-gauge steel; pre-drilled and direct bolt-on; arrives ready to scuff, prime and paint.

€332.35 €417.82

-€42.97

SW-MOTECH Centerstand — Bolt-on, Black

Sturdy centerstand for easy lifting and high cornering clearance; includes mounting hardware and instructions.

€167.11 €210.08

-€2.96

DRAG SPECIALTIES Fuel Tank Outlet Plug — Chrome

Plugs fuel-tank outlets for tanks using a fuel-injection or petcock adapter; includes O‑ring seal.

€8.39 €11.35

-€12.29

DYNOJET-HARLEY Sidestand Switch Guard — Gray anodized, Aluminum

Protects the side stand switch from rocks and tip-overs; hardware included; 7" x 5-1/8" x 2-1/2".

€47.82 €60.11

FIX-Stand Angle Block — Black, powder-coated

-€25.08

PAUL YAFFE BAGGER NATION FIX-Stand Angle Block — Black, powder-coated

Five-minute install that stops kickstand digging and non-locking, increases lean angle, and protects the spring.

€97.55 €122.63

$Kickstand — Extended 25.4 mm (1\")$

-€20.20

DRAG SPECIALTIES Kickstand — Extended 25.4 mm (1\")

High-strength construction; 1" over stock length. Measurements given between the foot and upper pivot centerline.

€57.08 €77.28

Hugger Series Front Fender — 41-7/8" contour, 19" wheel fit, Black

-€75.46

KLOCK WERKS Hugger Series Front Fender — 41-7/8" contour, 19" wheel fit,...

Thick construction adds rigidity while allowing custom trimming for a personalized look. Stamped and pre-drilled to ensure consistent fit and reduce body work. Durable protective coating helps resist rust and corrosion. Made in the USA. Requires Klock Werks Tire Hugger mounting blocks (sold separately).

€293.45 €368.91

Fuel Valve Petcock — 22 mm outlet, 7.9 mm (5/16") hose barb, Chrome

-€26.86

SPYKE Fuel Valve Petcock — 22 mm outlet, 7.9 mm (5/16") hose barb,...

High-flow petcock with 360° swivel and audible detent for precise positioning. Fits stock and custom tanks; easy installation and reliable performance.

€104.48 €131.34

Out of Stock

PINGEL PINGEL ADAPTER NUT 22MM CHRM

ADAPTER NUT 22MM CHRM

€36.84

-€10.05

S&S CYCLE Oil Control Valve — 310-1150, Black, Silver

Helps regulate oil flow to the cooler and heads. Durable billet aluminum construction, steel check ball retainer, easy to install. Made in the USA.

€39.08 €49.13

-€77.62

DRAG SPECIALTIES Big Buffalo Engine Guard — 1-1/2" diameter, front mounting

Robust engine protection made in the USA for reliable, long-lasting coverage.

€219.36 €296.98

-€2.22

JAGG OIL COOLERS Replacement Gasket Service Kit — JAGG OIL COOLERS, GK4600, Black

Service kit with replacement gasket for oil filter adapter; made in the USA.

€8.64 €10.86

$Stainless Steel Braided Hose — 6.4 mm (1/4\"), 91 cm (3'), Stainless steel$

-€5.26

DRAG SPECIALTIES Stainless Steel Braided Hose — 6.4 mm (1/4\"), 91 cm (3'),...

Suitable for oil and gas applications. Not for use with fuel over 10% alcohol. Inspect regularly and replace if worn.

€14.85 €20.11

-€5.53

DRAG SPECIALTIES Stainless Steel Braided Hose — 7.9 mm (5/16"), 91 cm (3')

Hose for oil and gas applications. Not for use with fuel over 10% alcohol.

€15.65 €21.18

Hugger Series Front Fender with Mounting Blocks for Softail/Dyna — 19" wheel, 41-7/8" contour length, Black

-€94.34

KLOCK WERKS Hugger Series Front Fender with Mounting Blocks for...

Stamped 14-gauge steel fender with 13-step E-coating, laser cut and pre-drilled; includes zinc-plated mounting hardware and satin mounting blocks. Made in the USA.

€366.86 €461.20

-€18.62

DRAG SPECIALTIES Kickstand — Standard, Black

Direct-fit replacement kickstand; under-stock lengths suit lowered suspension; measured from first bend to first bend for Big Twin, Softail, FLT and XL.

€52.63 €71.25

Big Buffalo Saddlebag Bars — 1.25" (31.8 mm) diameter, rear mount, chrome

-€77.53

DRAG SPECIALTIES Big Buffalo Saddlebag Bars — 1.25" (31.8 mm) diameter, rear...

Chromed rear saddlebag bars offering durable support; pair is not compatible with saddlebag rails and requires support brackets for '04-'13 FLTR/X models (sold separately).

€219.09 €296.62

-€18.62

DRAG SPECIALTIES Kickstand — Standard, Black, Powder-coated gloss

High-strength steel kickstand; direct OEM replacement; under-stock length available for lowered suspension.

€52.63 €71.25

Tank Fitting Kit for Fuel Injection to Carburetor Conversion — 1/4" NPT, Silver

-€23.09

PINGEL Tank Fitting Kit for Fuel Injection to Carburetor Conversion —...

Replaces factory tank fittings so a carburetor can be supplied with adequate fuel on large-displacement engines. Designed for use with a Pingel fuel valve; made in the USA.

€89.82 €112.91

Soft Fairing Lower Set With Storage Pouch — Black

-€24.61

SADDLEMEN Soft Fairing Lower Set With Storage Pouch — Black

Soft fairing lowers with a plush felt liner and storage pouch for added weather protection. Snaps to engine guards with adjustable straps and a perimeter zipper; installs quickly.

€69.57 €94.18

-€1.43

DRAG SPECIALTIES Kickstand Spring — Black

Durable replacement component; springs are measured from hook to hook for proper fit.

€4.05 €5.48

Big Buffalo Saddlebag Bars — 1-1/4" (31.8 mm) diameter, rear, black

-€73.85

DRAG SPECIALTIES Big Buffalo Saddlebag Bars — 1-1/4" (31.8 mm) diameter, rear,...

Durable steel saddlebag guard, made in the U.S.A.; not for use with saddlebag rails. Fits '04-'13 FLTR/X with support brackets (sold separately).

€208.72 €282.57

-€10.69

DRAG SPECIALTIES Stainless Steel Braided Hose — 5/16" ID, 6' length

Suitable for oil and gas applications. Not for use with fuels over 10% alcohol.

€30.23 €40.92

-€22.00

DRAG SPECIALTIES Side Covers — Right, Chrome

Stamped replacement side covers; bolt-on installation in minutes without drilling.

€62.18 €84.18

-€42.97

SW-MOTECH Centerstand — Bolt-on mounting, Black

Robust centerstand that provides stability and high cornering clearance. Easy to mount and lift. Includes mounting kit and instructions.

€167.11 €210.08

-€8.62

DRAG SPECIALTIES Kickstand Mounting Repair Kit — Chrome

Includes mount, spring, leg stop and nut.

€24.36 €32.98

Stainless Steel Braided Hose — 3/8" (9.5 mm) ID, 6' (183 cm), Fuel/Oil

-€11.24

DRAG SPECIALTIES Stainless Steel Braided Hose — 3/8" (9.5 mm) ID, 6' (183 cm),...

For oil and gas applications. Do not use with fuel over 10% alcohol.

€31.76 €43.00

-€22.00

DRAG SPECIALTIES Side Covers — Left, Chrome

Quick, no-drill replacement for painted stock covers with stamped construction for durability.

€62.18 €84.18

-€14.70

DRAG SPECIALTIES Fuel Petcock — 1/4" outlet, 5/16" hose barb, Chrome

High-flow round-body petcock with three-position knob (on/off/reserve), 1/4" outlet and 5/16" hose barb. Position assumes left-side tank mounting with lever in off.

€41.52 €56.22

shop by category

Body & Frame

Subcategories

Fenders

Fuel Tanks

Gas Tank caps & petcocks

Oil Tanks

Kickstands

Oil Coolers & Lines

Contact us

Products

Our company