S&S CYCLE (7)

-€95.34

S&S CYCLE 570 Easy Start Camshaft Kit — 570 Series grind, Chain

Reduces crank compression for easier starts; bolt-in kit for 88"/95"/103" engines, power gain 3200–5700 rpm. Includes camshafts, gasket, bearings, retaining ring, o-ring, thread lock and instructions. Not for models with OEM compression releases.

€370.77 €466.11

-€118.34

S&S CYCLE 583 Easy Start Camshaft Kit — 583 series grind, chain

Bolt-in camshaft kit that eases starting by reducing initial crank compression; delivers strong low-end torque for Softail and Dyna. Includes cams and installation hardware; made in the USA.

€461.14 €579.48

-€84.68

S&S CYCLE 551C Chain Drive Camshaft Kit — 551 Series, Chain

Bolt-in camshaft kit for 96–106 CID engines (9:1–9.9:1). Improves low- and midrange torque, strongest at 1,000–4,000 rpm. For '06 Dyna and '07-'17 Twin Cam hydraulic tensioner chain drive systems. Not recommended for 10:1+ compression.

€329.33 €414.01

-€1.00

S&S CYCLE Carburetor Springs — S&S CYCLE 11-2340

Restores throttle return and needle seating for reliable idle and carburetor response. Made in the USA.

€3.90 €4.90

-€107.12

S&S CYCLE Piston Kit for S&S Motors — Bore 3.927", Oversize +0.010", 106"

Complete piston kit with pistons, rings, wrist pins and clips for a full motor replacement. Made in the U.S.A.

€416.58 €523.70

-€84.68

S&S CYCLE 510C Camshaft Kit — 510 Series, Chain

Complete 510C camshaft kit with cams, gaskets, bearings and instructions. Bolt‑in for 88", 95", 96" and 103" CID engines (compression < 9.7:1). Stock pushrods and springs acceptable. Strongest 3,000–5,500 RPM. Made in USA.

€329.33 €414.01

-€232.10

S&S CYCLE Piston Kit for S&S Motor — 1250 cc, 3.5625", 3-13/16", 11.2:1

Complete piston kit including pistons, rings, wrist pin and clips. Made in the USA. Not compatible with XR1200 or RH Sportster.

€291.60 €523.70

-€50.40

S&S CYCLE Valve Spring Cover — Knuckle style, die-cast, black anodized, kit

Improves oil scavenging and reduces leaking. Removable lower cover for easier service. Replaceable oil return lines. Relatively stock appearance.

€196.02 €246.42

-€38.39

S&S CYCLE Super Stock™ Stealth Air Cleaner Kit — CV, Black

Built-in stinger cone reduces turbulence and increases flow; kit includes backing plate, filter and hardware. Made in the USA.

€149.32 €187.71

High Compression Piston Kit — 4.000" bore, 110" displacement, 10.6:1 compression

-€124.61

S&S CYCLE High Compression Piston Kit — 4.000" bore, 110" displacement,...

High compression piston kit with 12.5cc raised dome, 1.0985" deck height and .927" wristpin; not for twin cooled or '17 touring models.

€484.59 €609.20

-€39.26

S&S CYCLE Air Cleaner Stealth 08-16FLT — Part No. 170-0061

Low-profile air cleaner for 2008–2016 FLT models; compact stealth design and improved airflow.

€152.98 €192.24

-€38.39

S&S CYCLE Super Stock™ Stealth Air Cleaner Kit — CV model, black

Built-in stinger cone reduces turbulence and increases flow
Kit includes backing plate, filter and hardware
Made in the USA

€149.32 €187.71

509C Chain Drive Camshaft Kit — Chain drive, for 88 CID, '00–'06 Twin Cam

-€84.68

S&S CYCLE 509C Chain Drive Camshaft Kit — Chain drive, for 88 CID,...

Bolt-in 509C cams deliver excellent low/mid torque with strongest pull at 1000–4500 RPM. Installer must verify clearances; made in USA.

€329.33 €414.01

Piston Kit for S&S Motors — Bore 3.500", oversize +0.010", 80 cu in

-€34.97

S&S CYCLE Piston Kit for S&S Motors — Bore 3.500", oversize +0.010", 80...

Complete piston kit includes forged pistons, rings, wrist pins and clips for a full motor replacement. Made in the U.S.A.

€135.99 €170.96

-€192.09

S&S CYCLE 509G Gear Drive Camshaft Kit — 88 ci

Bolt-in 509G gear drive cam kit for 88 ci engines. Includes cams, gears, bearings and gaskets. Requires professional installation and clearance checks.

€747.05 €939.14

$Piston Kit for S&S Motors — +0.020\" oversize, 3.500\" bore$

-€34.97

S&S CYCLE Piston Kit for S&S Motors — +0.020\" oversize, 3.500\" bore

Includes forged pistons, rings, wrist pins and clips for a complete motor replacement. Made in the U.S.A.

€135.99 €170.96

-€38.66

S&S CYCLE Piston Kit for S&S Motors — 3.5" bore, 80 cu in

Complete piston kit including pistons, rings, wrist pins and clips. Made in the U.S.A. Professional installation recommended.

€150.64 €189.30

-€8.15

S&S CYCLE Tappet Block/Oil Pump Alignment Tool — Tappet, Oil system, Gray

Ensures tappet blocks track properly on the camshaft and aligns Twin Cam oil pump to the cam support plate; two tools required for Twin Cam engines.

€31.72 €39.87

640 Easy Start Camshaft Kit — 95"/96"/103"/110" engines, 10.5:1–11.5:1 compression, 3,000–6,000 rpm

-€126.14

S&S CYCLE 640 Easy Start Camshaft Kit — 95"/96"/103"/110" engines,...

Reduces compression for easier starting; retracts at rpm for full compression. For 95"–110" engines, 10.5:1–11.5:1. Installer checks required.

€490.59 €616.73

-€98.76

S&S CYCLE Camshaft Kit with Inner Gears — 510 Series grind, Gear type

Complete camshaft kit with inner and outer gears plus installation hardware: gearcover gasket, bearings, oil passage block-off kit, retaining ring, o-ring and instructions.

€384.07 €482.83

-€10.05

S&S CYCLE Oil Control Valve — 310-1150, Black, Silver

Helps regulate oil flow to the cooler and heads. Durable billet aluminum construction, steel check ball retainer, easy to install. Made in the USA.

€39.08 €49.13

Big Bore Piston Kit — Bore 4.250 in, Stroke 4.500 in, Displacement 128 cu in, Oversize +0.010 in

-€131.17

S&S CYCLE Big Bore Piston Kit — Bore 4.250 in, Stroke 4.500 in,...

Complete piston kit including pistons, rings, wristpins and clips. Compression ratios are approximate and calculated using correct cylinder lengths.

€510.10 €641.27

-€274.73

S&S CYCLE Big Bore Piston Kit — 4.250" bore, 4.625" stroke, 131 cu in

Complete piston kit includes pistons, rings, wristpins and clip. Compression ratios listed are approximate and are calculated using the correct length cylinders as specified by S&S.

€345.16 €619.89

-€107.92

S&S CYCLE Piston Kit — 4.00" bore, 4.00" stroke, 100 cu in displacement

Forged flat-top pistons intended for S&S Super Sidewinder and other custom 4" bore engine applications, built for reliable performance and tight tolerances.

€419.69 €527.61

-€75.30

S&S CYCLE Teardrop Air Cleaner Kit — CV, Black gloss

Complete air cleaner kit that increases horsepower with no other changes. Includes cover, backing plate, filter element, and hardware. Made in the USA.

€293.43 €368.73

-€66.69

S&S CYCLE Teardrop Air Cleaner Kit — CV, Black gloss

Complete teardrop-style air cleaner kit with cover, backing plate, high-flow filter element and hardware. Fits most OEM carburetors and performance intakes. Made in USA.

€259.38 €326.07

Teardrop Air Cleaner Backplate — P/N 17-0336

-€26.52

S&S CYCLE Teardrop Air Cleaner Backplate — P/N 17-0336

Replacement tear-drop backplate. Made in the USA. Sold individually.

€103.14 €129.66

Air Filter Pre-Filter — Black, Teardrop, for Air Stinger

-€12.12

S&S CYCLE Air Filter Pre-Filter — Black, Teardrop, for Air Stinger

Pre-filter that prevents large debris from clogging the filter and reduces water ingress. Washable nylon construction; water resistant. Compatible with Air Stinger air cleaners.

€47.14 €59.26

-€12.12

S&S CYCLE Air Filter Pre-Filter — Air Stinger, Black

Washable, water-resistant pre-filter that prevents debris and reduces water ingestion to extend filter life.

€47.14 €59.26

-€1.43

S&S CYCLE Replacement Air Cleaner Screw — 0.031 in (0.79 mm)

Replacement screw for original S&S Teardrop air cleaners. Made in the USA.

€5.58 €7.01

shop by category

Home

List of products by brand S&S CYCLE

Contact us

Products

Our company

shop by category

Home  

List of products by brand S&S CYCLE

Home