Best sellers

-€7.32

FEULING OIL PUMP CORP. Replacement Tensioner Pads — Inner, Outer, Red

Direct drop-in replacement with PTFE-enhanced polymer, single-piston tensioner performance, and included hydraulic lash units.

€28.44 €35.76

Cush Drive Dampener — Green, OEM compatible

-€13.03

ALLOY ART Cush Drive Dampener — Green, OEM compatible

High-quality replacement dampener that fits like OE rubber and installs like stock. Will not deteriorate or compress like the OE dampener, providing a much longer lifetime. Made in the USA.

€36.82 €49.85

-€43.34

FEULING OIL PUMP CORP. HP+® Hydraulic Lifters — Roller, 0.8420 in, Set of 4

Dyno-developed, CNC-machined components that increase oil flow and extend top-end valve train life; installation may require removal of rocker covers with one-piece pushrods.

€168.55 €211.89

-€69.27

FEULING OIL PUMP CORP. Vented Dipstick — Black

Billet vented dipstick replaces the factory oil fill, reduces blowby pressure, improves oil control and helps maintain the correct hot oil level.

€269.36 €338.63

Replacement Electric Fuel Injector — 6.10 g/s (48.41 lb/h), P/N 9935

-€38.82

FEULING OIL PUMP CORP. Replacement Electric Fuel Injector — 6.10 g/s (48.41 lb/h),...

Quality OEM replacements and upgrades. Made in the USA.

€150.97 €189.79

Camshaft Sprocket Thrust Washer Alignment Spacer Kit — front 0.100", rear 0.110"–0.150"

-€15.08

FEULING OIL PUMP CORP. Camshaft Sprocket Thrust Washer Alignment Spacer Kit — front...

Alignment kit for camshaft sprocket and crankshaft on '99-'06 engines; includes front thrust washer 0.100" and rear alignment washers 0.110"–0.150".

€58.80 €73.88

-€57.93

BILTWELL Utility Mirror Round Short Arm — Black

Round short-arm utility mirror with long perch, stainless-steel pivot, wide-angle tempered glass, and switchable bezel hardware.

€62.02 €119.95

Gooden Tight™ Handlebar Riser Bushing Kit for Harley Davidson — 4-pack, Silver

-€18.70

ALLOY ART Gooden Tight™ Handlebar Riser Bushing Kit for Harley Davidson...

Revolutionary vibration reduction and improved ride comfort, made in the U.S.A.

€52.84 €71.54

Extra Plate Clutch Kit — Aramid fiber friction plates, Steel drive plates

-€42.80

BARNETT Extra Plate Clutch Kit — Aramid fiber friction plates, Steel...

High-density friction plates increase surface area by 11% for longer clutch life; precision-manufactured drive plates; made in the U.S.A.

€166.47 €209.27

-€3.89

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.14 €19.03

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€26.33

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€102.40 €128.73

-€27.17

BILTWELL O/S Speeds Clamps — 25.4–31.75 mm (1"–1-1/4"), Black

Clean solution for installing select stock and aftermarket Harley-Davidson® gauge brackets. CNC-machined 6061 billet aluminum. Reducer shims for 1" and 1-1/4" risers.

€76.78 €103.95

-€38.91

DYNATEK-HARLEY Dual-Output Coil — 12V, Black

Reliable dual-output ignition coil engineered for aftermarket and OEM systems; made in the USA.

€151.32 €190.23

-€38.91

DYNATEK-HARLEY Miniature Series Coil — 12V, 3.0Ω, dual-plug

High-output miniature coil for Dyna 2000/3000 and dwell-control ignitions. Secondary resistance 11.5 ohms. Not for Twin Cam or Dyna "S"/DYNA III and earlier.

€151.32 €190.23

Dyna 2000TC Programmable Digital Performance Ignition Module — Black

-€64.08

DYNATEK-HARLEY Dyna 2000TC Programmable Digital Performance Ignition Module —...

Single-fire, fully programmable ignition with 16 advance curves, 8 rev limiter settings, PC programmability, coil-current monitoring and data logging; made in USA.

€249.24 €313.32

-€8.35

BILTWELL Foot Peg Mounts — Black, female mount

Investment-cast 4130 chromoly steel mounts with a threaded interface for easy angle adjustment; secure with the stock pivot pin or 3/8" bolts and nuts.

€23.60 €31.95

WME Series Rear Shocks — HD035WME02V2, black

-€66.43

BITUBO S.R.L. WME Series Rear Shocks — HD035WME02V2, black

High-performance radial piston design with straight flow for fast response
Anti-block and anti-fading systems for reliable damping
50/30-click rebound and compression adjusters
Progressive spring with threaded preload; adjustable for solo or two-up riding

€383.90 €450.33

Gooden-Tite Swingarm Reinforcement Bushing Kit — ALLOY ART, GT-SA2, Swingarm kit

-€24.52

ALLOY ART Gooden-Tite Swingarm Reinforcement Bushing Kit — ALLOY ART,...

Reduces motor flop while preserving vibration damping. Fits stock OEM rear engine isolator mounts. Made in the USA.

€69.31 €93.83

Carbon Fiber Clutch Plate Kit — carbon fiber friction, steel drive plates

-€51.09

BARNETT Carbon Fiber Clutch Plate Kit — carbon fiber friction, steel...

High-friction carbon composite friction plates with precision steel drive plates; made in the U.S.A.

€198.68 €249.77

Competition Adjustable Front Stabilizer Link — Front, Aluminum, Raw or Machined

-€41.06

ALLOY ART Competition Adjustable Front Stabilizer Link — Front,...

Adjustable front stabilizer link for HD Touring frames with reverse-thread rod end and ARP stainless bolts; available in black anodized, gold anodized, or machined finish. Made in the USA.

€116.05 €157.11

Gooden-Tite ISO Front Engine Mount — Front, Aluminum, GTMM-1

-€32.94

ALLOY ART Gooden-Tite ISO Front Engine Mount — Front, Aluminum, GTMM-1

CNC-machined base plate with cast high-performance polyurethane isolator bushings. Made in the U.S.A.

€93.08 €126.02

Race Series® Full-Travel Hydraulic Lifters — 0.200" travel, 0.8425" size, set of 4

-€68.49

FEULING OIL PUMP CORP. Race Series® Full-Travel Hydraulic Lifters — 0.200" travel,...

Full-travel hydraulic lifters with .200" travel for large-lift cams; maintain critical oil flow, reduce valve float, and improve valvetrain stability. Recommended for strip and performance street engines.

€266.35 €334.84

-€36.52

FEULING OIL PUMP CORP. HP+ One Piece Pushrods — 7/16" diameter, 0.165" wall, Black Oxide

One-piece, fixed-length pushrod set recommended to reduce valvetrain harmonics and hydraulic lifter issues.

€142.01 €178.53

HP+® Fixed Length Pushrods — 7/16" diameter, 0.165" wall, stock length

-€36.52

FEULING OIL PUMP CORP. HP+® Fixed Length Pushrods — 7/16" diameter, 0.165" wall,...

Durable pushrods compatible with hydraulic or solid lifters; suitable for street and race engines. Works with Feuling® stock and SE M8 camshafts. Made in the USA. Installation requires removal of rocker covers and rocker arms.

€142.01 €178.53

HP+ Hydraulic Cam Chain Tensioner Conversion Kit — fits 1999–2006 to 2007–2017

-€289.74

FEULING OIL PUMP CORP. HP+ Hydraulic Cam Chain Tensioner Conversion Kit — fits...

Complete kit to convert early 1999–2006 mechanical spring cam chain tensioners to late 2007–2017 hydraulic systems; includes pump, lifters, chains, sprockets, hardware and rocker box gasket kit.

€1,127.05 €1,416.79

OE+ Hydraulic Cam Chain Conversion Camchest Kit — 525 Series grind, Chain drive

-€402.36

FEULING OIL PUMP CORP. OE+ Hydraulic Cam Chain Conversion Camchest Kit — 525 Series...

Complete hydraulic cam chain conversion kit for OE+ engines. Includes Feuling® OE+® oil pump, Reaper® cams, HP+® hydraulic lifters, chains, sprockets and full hardware. Made in the USA.

€1,564.75 €1,967.11

OE+ Hydraulic Cam Chain Tensioner Conversion Kit — FEULING PARTS, OE+ Hydraulic, 7088

-€186.13

FEULING OIL PUMP CORP. OE+ Hydraulic Cam Chain Tensioner Conversion Kit — FEULING...

Complete conversion kit to upgrade early mechanical spring cam chain drives ('99–'06) to a late-style hydraulic system; includes pump, camplate, tensioners, chains, sprockets and hardware. Requires separate conversion camshafts.

€723.88 €910.01

Crankshaft Sprocket — 17 tooth, outer mounting, steel

-€13.81

FEULING OIL PUMP CORP. Crankshaft Sprocket — 17 tooth, outer mounting, steel

Tighter inner-diameter tolerance improves pinion fit and reduces cam timing variance. Made in USA.

€53.73 €67.54

-€92.57

FEULING OIL PUMP CORP. Reaper® 505/515 Cam — Split lift, Exhaust 248°, Intake 239°

Wide, rideable powerband for stock engines.

Split lift character with top fuel sound.

Use with stock pushrods and valve springs; lifter change recommended.

€360.00 €452.57

-€85.50

FEULING OIL PUMP CORP. Reaper® 543 Cam — 543 Series, fits 88–103 cu in engines

More power than 525 cams without losing low-end torque
Smooth, quiet valve train with refined cruise power band
Bolt-in for stock to mid 96" and 103" engines; responds well to compression, exhaust, and air-flow upgrades

€332.49 €417.99

shop by category

Home

Best sellers

Contact us

Products

Our company

shop by category

Home  

Best sellers

Home