Best sellers

Tab-Tite™ Spring Loaded Holder — fits 7–8 in tablets, Black

-€5.97

RAM MOUNTS Tab-Tite™ Spring Loaded Holder — fits 7–8 in tablets, Black

Spring-loaded holder secures 7–8 in tablets with a case; compatible with B and C size RAM® round ball bases; made from high-strength composites.

€23.24 €29.21

-€7.32

FEULING OIL PUMP CORP. Replacement Tensioner Pads — Inner, Outer, Red

Direct drop-in replacement with PTFE-enhanced polymer, single-piston tensioner performance, and included hydraulic lash units.

€28.44 €35.76

-€43.34

FEULING OIL PUMP CORP. HP+® Hydraulic Lifters — Roller, 0.8420 in, Set of 4

Dyno-developed, CNC-machined components that increase oil flow and extend top-end valve train life; installation may require removal of rocker covers with one-piece pushrods.

€168.55 €211.89

-€69.27

FEULING OIL PUMP CORP. Vented Dipstick — Black

Billet vented dipstick replaces the factory oil fill, reduces blowby pressure, improves oil control and helps maintain the correct hot oil level.

€269.36 €338.63

Replacement Electric Fuel Injector — 6.10 g/s (48.41 lb/h), P/N 9935

-€38.82

FEULING OIL PUMP CORP. Replacement Electric Fuel Injector — 6.10 g/s (48.41 lb/h),...

Quality OEM replacements and upgrades. Made in the USA.

€150.97 €189.79

Camshaft Sprocket Thrust Washer Alignment Spacer Kit — front 0.100", rear 0.110"–0.150"

-€15.08

FEULING OIL PUMP CORP. Camshaft Sprocket Thrust Washer Alignment Spacer Kit — front...

Alignment kit for camshaft sprocket and crankshaft on '99-'06 engines; includes front thrust washer 0.100" and rear alignment washers 0.110"–0.150".

€58.80 €73.88

-€45.03

MOTHERWELL 6" Solo Luggage Rack — 6" (15 cm) wide, 11" (28 cm) long, chrome

Carry gear without risking the paint; mounts using existing fender holes. Made in the USA.

€175.15 €220.18

-€3.89

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.14 €19.03

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€26.33

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€102.40 €128.73

Dash Cover for Harley — Low Rider S, Glossy Black

-€33.11

CULT WERK Dash Cover for Harley — Low Rider S, Glossy Black

Replacement dash cover that provides a clean tank appearance, enables speedometer relocation, is precision CNC-milled, and includes all mounting hardware.

€191.06 €224.17

-€38.91

DYNATEK-HARLEY Dual-Output Coil — 12V, Black

Reliable dual-output ignition coil engineered for aftermarket and OEM systems; made in the USA.

€151.32 €190.23

-€38.91

DYNATEK-HARLEY Miniature Series Coil — 12V, 3.0Ω, dual-plug

High-output miniature coil for Dyna 2000/3000 and dwell-control ignitions. Secondary resistance 11.5 ohms. Not for Twin Cam or Dyna "S"/DYNA III and earlier.

€151.32 €190.23

Dyna 2000TC Programmable Digital Performance Ignition Module — Black

-€64.08

DYNATEK-HARLEY Dyna 2000TC Programmable Digital Performance Ignition Module —...

Single-fire, fully programmable ignition with 16 advance curves, 8 rev limiter settings, PC programmability, coil-current monitoring and data logging; made in USA.

€249.24 €313.32

License Plate — 21 cm width, 14.3 mm height, black

-€38.03

CULT WERK License Plate — 21 cm width, 14.3 mm height, black

Precision CNC-lasered license plate holder with durable powder-coated finish and integrated LED lighting with E-test mark.

€219.47 €257.50

License Plate Bracket — Black, steel and ABS, HD-BRO078

-€43.69

CULT WERK License Plate Bracket — Black, steel and ABS, HD-BRO078

Compact central bracket with CNC precision, durable powder finish and two LED lighting versions; mounts to original fender points.

€252.14 €295.83

Crash Bar End Cap — Pair, left/right, black

-€8.57

CULT WERK Crash Bar End Cap — Pair, left/right, black

V1/V2 end caps designed to finish bar ends and create a clubstyle look. Supplied as a matched set for both sides.

€49.41 €57.98

-€42.97

CULT WERK Crash Bar Clubstyle — Cruiser, black

Clubstyle crash bar with precise CNC fitment and options for coated or uncoated finishes to protect and style your bike.

€247.86 €290.83

WME Series Rear Shocks — HD035WME02V2, black

-€66.43

BITUBO S.R.L. WME Series Rear Shocks — HD035WME02V2, black

High-performance radial piston design with straight flow for fast response
Anti-block and anti-fading systems for reliable damping
50/30-click rebound and compression adjusters
Progressive spring with threaded preload; adjustable for solo or two-up riding

€383.90 €450.33

-€19.57

CULT WERK Lowering Kits — Rear, Black

Spacer set for the lower shock absorber mount that lowers the bike about 35 mm; CNC lasered and black powder coated. Includes hardware and four spring deflection limiters. Assembly approx. 15 minutes. 1 set = 2 pieces.

€112.93 €132.50

-€112.85

TRASK Billet Clutch Basket — Gold, anodized

Strongly recommended for engines producing 100+ hp; handles builds over 300 hp. Direct bolt-on replacement. Includes mounting bolts and lock tabs. Made in the USA.

€438.89 €551.74

CheckM8™ Vented Transmission Top Cover — Chrome

-€84.03

TRASK CheckM8™ Vented Transmission Top Cover — Chrome

Reduces oil from head breathers on M8 engines
Boyesen one-way reed valve vents crankcase pressure
No dipstick hose required
Includes hose and breather filter

€326.81 €410.84

CheckM8™ Vented Transmission Top Cover — M8 fitment, Black

-€84.03

TRASK CheckM8™ Vented Transmission Top Cover — M8 fitment, Black

Vented transmission top cover for M8 engines that reduces breather oil, vents crankcase pressure, and includes hose and breather filter.

€326.81 €410.84

VCM Digital Tuning Licence — TECHNORESEARCH TR200020

-€122.50

TECHNORESEARCH VCM Digital Tuning Licence — TECHNORESEARCH TR200020

Single-motorcycle digital tuning license for use with Centurion Super Pro Plus and VCM-TR4 Dealer Pack. Licenses sold separately.

€187.50 €310.00

VCM-Tr4 Dealer Pack — Tuner Kit, Autotune, Black

-€235.88

TECHNORESEARCH VCM-Tr4 Dealer Pack — Tuner Kit, Autotune, Black

Dealer-grade VCM-Tr4 tuning and data-logging pack for Harley-Davidson Delphi EFI systems. Includes VCM-TR4, master key, cables, USB, and 2 digital licenses.

€801.00 €1,036.88

Race Series® Full-Travel Hydraulic Lifters — 0.200" travel, 0.8425" size, set of 4

-€68.49

FEULING OIL PUMP CORP. Race Series® Full-Travel Hydraulic Lifters — 0.200" travel,...

Full-travel hydraulic lifters with .200" travel for large-lift cams; maintain critical oil flow, reduce valve float, and improve valvetrain stability. Recommended for strip and performance street engines.

€266.35 €334.84

-€36.52

FEULING OIL PUMP CORP. HP+ One Piece Pushrods — 7/16" diameter, 0.165" wall, Black Oxide

One-piece, fixed-length pushrod set recommended to reduce valvetrain harmonics and hydraulic lifter issues.

€142.01 €178.53

HP+® Fixed Length Pushrods — 7/16" diameter, 0.165" wall, stock length

-€36.52

FEULING OIL PUMP CORP. HP+® Fixed Length Pushrods — 7/16" diameter, 0.165" wall,...

Durable pushrods compatible with hydraulic or solid lifters; suitable for street and race engines. Works with Feuling® stock and SE M8 camshafts. Made in the USA. Installation requires removal of rocker covers and rocker arms.

€142.01 €178.53

HP+ Hydraulic Cam Chain Tensioner Conversion Kit — fits 1999–2006 to 2007–2017

-€289.74

FEULING OIL PUMP CORP. HP+ Hydraulic Cam Chain Tensioner Conversion Kit — fits...

Complete kit to convert early 1999–2006 mechanical spring cam chain tensioners to late 2007–2017 hydraulic systems; includes pump, lifters, chains, sprockets, hardware and rocker box gasket kit.

€1,127.05 €1,416.79

OE+ Hydraulic Cam Chain Conversion Camchest Kit — 525 Series grind, Chain drive

-€402.36

FEULING OIL PUMP CORP. OE+ Hydraulic Cam Chain Conversion Camchest Kit — 525 Series...

Complete hydraulic cam chain conversion kit for OE+ engines. Includes Feuling® OE+® oil pump, Reaper® cams, HP+® hydraulic lifters, chains, sprockets and full hardware. Made in the USA.

€1,564.75 €1,967.11

OE+ Hydraulic Cam Chain Tensioner Conversion Kit — FEULING PARTS, OE+ Hydraulic, 7088

-€186.13

FEULING OIL PUMP CORP. OE+ Hydraulic Cam Chain Tensioner Conversion Kit — FEULING...

Complete conversion kit to upgrade early mechanical spring cam chain drives ('99–'06) to a late-style hydraulic system; includes pump, camplate, tensioners, chains, sprockets and hardware. Requires separate conversion camshafts.

€723.88 €910.01

shop by category

Home

Best sellers

Contact us

Products

Our company

shop by category

Home  

Best sellers

Home