Best sellers

-€2.75

ELF Moto Silicone Spray — 400 ml (13.5 US fl oz.), aerosol

Silicone spray that repels water, reduces friction, and protects metal, rubber, and plastic surfaces.

€4.55 €7.30

-€15.89

MOTION PRO BeadPro™ FS — Bead Breaker, 16"

Shop-grade tire tool that breaks beads on most motorcycles and ATVs. Ergonomic crossguard, integrated tire spoons, extra-long handles. Weighs ~2 lb.

€44.92 €60.81

-€7.32

FEULING OIL PUMP CORP. Replacement Tensioner Pads — Inner, Outer, Red

Direct drop-in replacement with PTFE-enhanced polymer, single-piston tensioner performance, and included hydraulic lash units.

€28.44 €35.76

-€43.34

FEULING OIL PUMP CORP. HP+® Hydraulic Lifters — Roller, 0.8420 in, Set of 4

Dyno-developed, CNC-machined components that increase oil flow and extend top-end valve train life; installation may require removal of rocker covers with one-piece pushrods.

€168.55 €211.89

-€69.27

FEULING OIL PUMP CORP. Vented Dipstick — Black

Billet vented dipstick replaces the factory oil fill, reduces blowby pressure, improves oil control and helps maintain the correct hot oil level.

€269.36 €338.63

-€4.28

MOTION PRO Hydraulic Brake Bleeder — Chrome

Unique check valve prevents air re-entry; enables one-person bleeding. Includes instructions and hose. Will not bleed a dry system.

€12.13 €16.41

-€30.45

MOTION PRO PBR Chain Tool — 520, 525, 530, Black

Compact, versatile tool for removing, pressing and riveting chain pins. Includes protective case, spare pin and an ergonomic handle; storable components for convenient transport.

€86.03 €116.48

Fork Seal Bullet Set — 36, 41, 43, 45, 46, 47, 48, 49 mm

-€8.14

MOTION PRO Fork Seal Bullet Set — 36, 41, 43, 45, 46, 47, 48, 49 mm

Protects fork seal and wiper during installation. Set includes bullets marked 36–49 mm for easy identification.

€22.99 €31.13

Replacement Electric Fuel Injector — 6.10 g/s (48.41 lb/h), P/N 9935

-€38.82

FEULING OIL PUMP CORP. Replacement Electric Fuel Injector — 6.10 g/s (48.41 lb/h),...

Quality OEM replacements and upgrades. Made in the USA.

€150.97 €189.79

Camshaft Sprocket Thrust Washer Alignment Spacer Kit — front 0.100", rear 0.110"–0.150"

-€15.08

FEULING OIL PUMP CORP. Camshaft Sprocket Thrust Washer Alignment Spacer Kit — front...

Alignment kit for camshaft sprocket and crankshaft on '99-'06 engines; includes front thrust washer 0.100" and rear alignment washers 0.110"–0.150".

€58.80 €73.88

Wheel Weights — 7.09 g (1/4 oz) segments, 72 pack, adhesive stick-on, powder-coated silver

-€2.59

MOTION PRO Wheel Weights — 7.09 g (1/4 oz) segments, 72 pack, adhesive...

Segmented 1/8 oz and 1/4 oz weights that stick securely to spoked and cast wheels; trim to fit for precise balancing.

€7.33 €9.92

-€4.09

ELF Oil Moto 4 Road 10W-40 — 1 L, 10W-40, JASO MA2

Motorcycle engine oil that controls viscosity with temperature for reliable cold starts, reduced friction, piston sealing, oxidation resistance and clutch protection.

€6.83 €10.92

-€4.87

ELF Oil Moto 4 Pro Tech 5W-40 Synthetic — 1 L, 5W-40, 4-stroke

High-performance synthetic motorcycle oil that resists oxidation, controls deposits, improves shift comfort, reduces noise and protects the clutch.

€8.32 €13.19

Damper Rod Fork Tool — 41 mm, 43 mm, 46 mm, 47 mm, Kayaba, Showa, Black

-€12.76

MOTION PRO Damper Rod Fork Tool — 41 mm, 43 mm, 46 mm, 47 mm, Kayaba,...

Aids assembly and disassembly of most 41–47 mm inverted forks; hardened construction; not required on '91–'92 Honda CR models.

€36.07 €48.83

Flywheel Puller Right Hand External Thread — M20 x 1.5, black oxide

-€3.42

MOTION PRO Flywheel Puller Right Hand External Thread — M20 x 1.5, black...

Compact flywheel puller designed for safe, reliable removal of flywheels and rotors; heat treated and laser marked.

€9.67 €13.09

Valve Core Remover/Installer — For Schrader valve, Black

-€1.33

MOTION PRO Valve Core Remover/Installer — For Schrader valve, Black

Removes and installs standard valve cores in tubed or tubeless stems. Compact tool ideal for tool packs and workshop kits.

€3.76 €5.09

Extra Plate Clutch Kit — Aramid fiber friction plates, Steel drive plates

-€42.80

BARNETT Extra Plate Clutch Kit — Aramid fiber friction plates, Steel...

High-density friction plates increase surface area by 11% for longer clutch life; precision-manufactured drive plates; made in the U.S.A.

€166.47 €209.27

Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

-€6.00

FUEL-TOOL Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

Replacement hooks for check valve rebuild kit; includes two lower O-ring hooks and two upper O-ring hooks; made in the USA.

€16.98 €22.98

-€4.72

MOTION PRO RimShield™ II — Blue, Pair

Protects rims during tire changes with dual raised beads, handholds, long apron, and improved design. Not for use on HD cast rims.

€13.35 €18.07

T-6 Combo Lever Adapter — 3/8" drive male, 1/4" drive female, blue anodized

-€8.84

MOTION PRO T-6 Combo Lever Adapter — 3/8" drive male, 1/4" drive female,...

Converts the T-6 Combo Lever™ to a 3/8" driver; 3/8" male to 1/4" female; coin knurling for hand turning; lightening holes; rated to 90 lb/ft.

€24.98 €33.82

SlackSetter Pro™ Chain Slack Setting Tool — up to 75 mm, Blue anodized

-€5.62

MOTION PRO SlackSetter Pro™ Chain Slack Setting Tool — up to 75 mm, Blue...

Compact tool that quickly measures chain slack and chain-to-swingarm clearance in millimeters.

€15.86 €21.48

Steering Head Race Puller — Black anodized

-€16.61

MOTION PRO Steering Head Race Puller — Black anodized

Removes outer steering head bearing races quickly and without a hammer; fits tapered races OD 47–55 mm, ID 37.5–45 mm.

€69.38 €85.99

-€8.73

MOTION PRO 5 in 1 Damper Rod Bleed Tool — 5-in-1, blue anodized

Five thread sizes in one compact tool for clean, efficient damper rod bleeding.

€24.67 €33.40

Steering Stem Bearing Tool — Steering stem, Blue anodized

-€48.41

MOTION PRO Steering Stem Bearing Tool — Steering stem, Blue anodized

Protects the steering stem during bearing removal and installation. Includes 26 mm, 28 mm, 30-31 mm and 35-36 mm race protectors. Compact design fits within steering stops. Laser etched for easy identification. Made in the USA.

€136.82 €185.23

-€14.78

MOTION PRO Steering Head Bearing Race Driver — Blue anodized

Fits tapered steering bearing races 41–42 mm, 47–48 mm, 51–52 mm and 55–56 mm; installs races safely with double-sided drivers and an ergonomic handle.

€41.78 €56.56

-€4.28

MOTION PRO Fork Compression Valve Removal Tool — Silver, 6061-T6 aluminum

Removes cartridge compression valves; 19 mm hex drive and 36 mm octagon engagement for secure extraction.

€12.13 €16.41

Counter Balancer and Clutch Hub Spanner for Honda — 20 mm ID, 3/8" driver, 4-pin spanner

-€2.96

MOTION PRO Counter Balancer and Clutch Hub Spanner for Honda — 20 mm ID,...

Heat-treated 4-pin spanner for removing Honda counter balancer and clutch hub nuts. 20 mm ID, for use with a 3/8" driver.

€8.38 €11.34

Pushrod Tool for Harley-Davidson — Fits Twin Cam, Evolution, Shovelhead, Panhead, XL, Blue/Silver

-€12.90

MOTION PRO Pushrod Tool for Harley-Davidson — Fits Twin Cam, Evolution,...

Tool for removing and installing clip-on collapsible pushrod tubes on Twin Cam and earlier Harley-Davidson models; prevents knuckle cuts and engine scratches.

€36.43 €49.33

-€3.89

FEULING OIL PUMP CORP. Pushrod Tube Holder — Pushrod Tube, Black

Holds pushrod tubes up and out of the way for easy adjustment. Fits EVO, TC and most aftermarket tubes.

€15.14 €19.03

Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO, Red

-€26.33

FEULING OIL PUMP CORP. Twin Cam/Evo Crankshaft Runout Measuring Tool — Twin Cam, EVO,...

Mounts to the cam chest to measure crankshaft run out and Twin Cam gear drive backlash. Includes tool plate, +/- 0.001 dial indicator, and mounting hardware.

€102.40 €128.73

shop by category

Home

Best sellers

Contact us

Products

Our company

shop by category

Home  

Best sellers

Home