Best sellers

Spark Plug — Thread reach 19.1 mm, Thread size 14 mm, Spark gap 1.1 mm, BPR5ES-11

-€2.55

NGK SPARK PLUGS Spark Plug — Thread reach 19.1 mm, Thread size 14 mm, Spark...

Reliable spark plug with corrosion protection, superior insulator strength, and enhanced heat removal.

€2.75 €5.30

Iridium IX Spark Plug — 19.1 mm reach, 10 mm thread, 0.8 mm gap, CR9EIX

-€11.69

NGK SPARK PLUGS Iridium IX Spark Plug — 19.1 mm reach, 10 mm thread, 0.8 mm...

Advanced iridium electrode and ultra-small center electrode reduce voltage needs and extend ignition life. Enhanced anti-corrosion metal shell plating. Sold each.

€10.81 €22.50

$Spark Plug — 14 mm thread, 12.7 mm reach, 20.6 mm hex (13/16\"), Heat range 6, 0.7 mm gap$

-€4.59

NGK SPARK PLUGS Spark Plug — 14 mm thread, 12.7 mm reach, 20.6 mm hex...

Durable spark plug with trivalent plating, alumina silicate insulator, triple seals, corrugated ribs and copper core for reliable ignition.

€3.61 €8.20

Cush Drive Dampener — Green, OEM compatible

-€13.03

ALLOY ART Cush Drive Dampener — Green, OEM compatible

High-quality replacement dampener that fits like OE rubber and installs like stock. Will not deteriorate or compress like the OE dampener, providing a much longer lifetime. Made in the USA.

€36.82 €49.85

Gooden Tight™ Handlebar Riser Bushing Kit for Harley Davidson — 4-pack, Silver

-€18.70

ALLOY ART Gooden Tight™ Handlebar Riser Bushing Kit for Harley Davidson...

Revolutionary vibration reduction and improved ride comfort, made in the U.S.A.

€52.84 €71.54

Extra Plate Clutch Kit — Aramid fiber friction plates, Steel drive plates

-€42.80

BARNETT Extra Plate Clutch Kit — Aramid fiber friction plates, Steel...

High-density friction plates increase surface area by 11% for longer clutch life; precision-manufactured drive plates; made in the U.S.A.

€166.47 €209.27

Stainless Steel Muffler Clamps — 44.5–50.8 mm clamping diameter, pair

-€8.09

KHROME WERKS Stainless Steel Muffler Clamps — 44.5–50.8 mm clamping...

Durable stainless steel muffler clamps with a 360° reaction block to prevent distortion and corrosion-resistant fasteners for reliable exhaust sealing.

€31.44 €39.53

4-1/2" HP-Plus® Slip-On Mufflers — Black Satin

-€175.88

KHROME WERKS 4-1/2" HP-Plus® Slip-On Mufflers — Black Satin

Dyno-tested: 12% more torque and 7% more power. 4-1/2" HP-Plus® slip-on with absorptive baffle and 16-gauge body. Made in the U.S.A.

€683.98 €859.86

2-into-2 Dominator Exhaust System — 4-1/2 in muffler, 12 & 18 mm O2 bungs, 2-into-2 system

-€430.01

KHROME WERKS 2-into-2 Dominator Exhaust System — 4-1/2 in muffler, 12 & 18...

Performance-focused 2-into-2 exhaust with enlarged interconnected headers, high-flow stepped primaries, full left-side crossover, removable baffles wrapped in stainless steel wool and high-temp fiberglass; heavy-duty AccuSeal clamps included. Made in USA.

€1,672.30 €2,102.31

WME Series Rear Shocks — HD035WME02V2, black

-€66.43

BITUBO S.R.L. WME Series Rear Shocks — HD035WME02V2, black

High-performance radial piston design with straight flow for fast response
Anti-block and anti-fading systems for reliable damping
50/30-click rebound and compression adjusters
Progressive spring with threaded preload; adjustable for solo or two-up riding

€383.90 €450.33

412 Series Shocks — 305 mm (12.00") , Black

-€89.65

PROGRESSIVE SUSPENSION 412 Series Shocks — 305 mm (12.00") , Black

Durable, cost-effective suspension upgrade designed for Harley models. Five-position preload adjuster; measured center-to-center; check fitment and clearance before installation. Made in the USA.

€348.66 €438.31

412 Series Shocks — 318 mm (12.50 in) extended length, Black, rear

-€74.89

PROGRESSIVE SUSPENSION 412 Series Shocks — 318 mm (12.50 in) extended length, Black,...

Designed for Harley models. Five-position preload adjuster for easy tuning. Multiple style options and built for durable, cost-effective performance. Made in the USA. Review fitment and clearance notes before installation.

€291.25 €366.14

412 Series Shocks — 305 mm (12 in) extended length, rear, black

-€74.89

PROGRESSIVE SUSPENSION 412 Series Shocks — 305 mm (12 in) extended length, rear, black

Durable, cost-effective replacement shocks designed for Harley models. Five-position cam-style preload adjuster. Measured center-to-eyelet. May require chain/belt guard spacing on some '86–'15 XL models. Check road-use certificate before purchase.

€291.25 €366.14

412 Series Shocks — 279.40 mm (11.00") extended, Black

-€74.89

PROGRESSIVE SUSPENSION 412 Series Shocks — 279.40 mm (11.00") extended, Black

Durable, cost-effective shock upgrade for many Harley models with a five-position preload adjuster. Check fitment and clearance before installation.

€291.25 €366.14

422 Series Shocks — Rear coilover monotube, gas-charged, chrome

-€124.83

PROGRESSIVE SUSPENSION 422 Series Shocks — Rear coilover monotube, gas-charged, chrome

Fully adjustable shocks with progressive-rate springs and monotube dampers. Nitrogen-charged to reduce oil cavitation and fade; adjustable up to 2" lower than stock. Confirm fitment before installation.

€485.44 €610.27

Gooden-Tite Swingarm Reinforcement Bushing Kit — ALLOY ART, GT-SA2, Swingarm kit

-€24.52

ALLOY ART Gooden-Tite Swingarm Reinforcement Bushing Kit — ALLOY ART,...

Reduces motor flop while preserving vibration damping. Fits stock OEM rear engine isolator mounts. Made in the USA.

€69.31 €93.83

Carbon Fiber Clutch Plate Kit — carbon fiber friction, steel drive plates

-€51.09

BARNETT Carbon Fiber Clutch Plate Kit — carbon fiber friction, steel...

High-friction carbon composite friction plates with precision steel drive plates; made in the U.S.A.

€198.68 €249.77

Competition Adjustable Front Stabilizer Link — Front, Aluminum, Raw or Machined

-€41.06

ALLOY ART Competition Adjustable Front Stabilizer Link — Front,...

Adjustable front stabilizer link for HD Touring frames with reverse-thread rod end and ARP stainless bolts; available in black anodized, gold anodized, or machined finish. Made in the USA.

€116.05 €157.11

Gooden-Tite ISO Front Engine Mount — Front, Aluminum, GTMM-1

-€32.94

ALLOY ART Gooden-Tite ISO Front Engine Mount — Front, Aluminum, GTMM-1

CNC-machined base plate with cast high-performance polyurethane isolator bushings. Made in the U.S.A.

€93.08 €126.02

-€13.02

ALLOY ART Heavy-Duty Handlebar Riser Bushings — Riser, Polished Silver

Precision riser bushings that reduce play and dampen handlebar vibration. Made in USA.

€36.81 €49.83

Drop-In Front Fork Lowering System — Lowers 2.00 in, fits 39/41/49 mm fork tubes

-€34.23

PROGRESSIVE SUSPENSION Drop-In Front Fork Lowering System — Lowers 2.00 in, fits...

Simple, fast installation that lowers the front end without disassembling the forks. Built for durability and made in the U.S.A.

€133.13 €167.36

-€63.86

PROGRESSIVE SUSPENSION Monotube Cartridge Fork Kit — 39 mm (1.54") fork tube

High-performance monotube cartridge conversion with gas-charged cartridges and custom-tuned springs for better stability, reduced brake dive and improved bottoming control. No fork modification required.

€248.33 €312.19

-€26.09

PROGRESSIVE SUSPENSION Fork Springs — 39.00 mm fork tube, 0.63–0.89 kg/mm, pair

Progressive fork springs improve handling and comfort while retaining OEM geometry. Made in the U.S.A.

€101.45 €127.54

-€26.72

KHROME WERKS HP-Plus® Performance Baffles — 4" and 4-1/2" fit, Pair, Silver

Performance inserts for 4" and 4-1/2" mufflers. Adjustable tone via bolt-held inserts. Easy installation with basic hand tools; change sound in minutes.

€103.91 €130.63

Extra Plate Clutch Kit — Steel drive plate, DuPont™ Kevlar® friction

-€34.48

BARNETT Extra Plate Clutch Kit — Steel drive plate, DuPont™ Kevlar®...

Six bonded friction plates, one metal drive plate and heavy-duty springs; increases contact area by ~20%; wet or dry use; Made in USA.

€134.13 €168.61

Louvered Performance Baffle Inserts — fits 4" and 4-1/2" HP-Plus® mufflers

-€22.30

KHROME WERKS Louvered Performance Baffle Inserts — fits 4" and 4-1/2"...

Deep, adjustable tone by swapping inserts in minutes.

Control your "Growl Level" with a two-bolt insert.

Easy installation with basic hand tools; no hammers required.

€86.70 €109.00

412 Series Shocks — 292 mm (11.50"), rear, Black

-€74.89

PROGRESSIVE SUSPENSION 412 Series Shocks — 292 mm (11.50"), rear, Black

Simple, durable shocks designed for Harley models with a five-position preload adjuster and multiple style options. Measured center-to-eyelet; verify clearance for '86-'15 XL models.

€291.25 €366.14

1-1/4" Bobber Ape Hanger Handlebar — 1-1/4" diameter, 16" rise, 36-1/2" width, Chrome

-€73.31

KHROME WERKS 1-1/4" Bobber Ape Hanger Handlebar — 1-1/4" diameter, 16"...

Forward-and-up grip angle for classic bobber ergonomics. Diamond-knurled center and pre-drilled dimples for late-model controls. Made in the U.S.A.

€285.10 €358.41

-€23.58

KHROME WERKS 1" Handlebar — 1" clamp, 27-1/4" width

Durable drag-style handlebar with 14-gauge steel tubing. Made in the U.S.A.

€91.72 €115.30

shop by category

Home

Best sellers

Contact us

Products

Our company

shop by category

Home  

Best sellers

Home