Best sellers

Cush Drive Dampener — Green, OEM compatible

-€13.03

ALLOY ART Cush Drive Dampener — Green, OEM compatible

High-quality replacement dampener that fits like OE rubber and installs like stock. Will not deteriorate or compress like the OE dampener, providing a much longer lifetime. Made in the USA.

€36.82 €49.85

-€17.88

TRW SV Series Sindered Brake Pads — 91.5 mm, 58.1 mm, 7 mm

Sintered metal front brake pads that provide consistent, reliable braking for compatible motorcycles.

€23.52 €41.40

Brake Rotor Fixed Round — 300 mm, 5.0 mm thickness, One-piece, Silver

-€14.43

TRW Brake Rotor Fixed Round — 300 mm, 5.0 mm thickness, One-piece,...

High-performance laser-cut silhouette, low wear under stress, prevents pad glazing, stable thermal behavior.

€83.27 €97.70

Gooden Tight™ Handlebar Riser Bushing Kit for Harley Davidson — 4-pack, Silver

-€18.70

ALLOY ART Gooden Tight™ Handlebar Riser Bushing Kit for Harley Davidson...

Revolutionary vibration reduction and improved ride comfort, made in the U.S.A.

€52.84 €71.54

Extra Plate Clutch Kit — Aramid fiber friction plates, Steel drive plates

-€42.80

BARNETT Extra Plate Clutch Kit — Aramid fiber friction plates, Steel...

High-density friction plates increase surface area by 11% for longer clutch life; precision-manufactured drive plates; made in the U.S.A.

€166.47 €209.27

-€47.53

NAMZ Twist Grip Sensor — Harley-Davidson, throttle-by-wire

Direct replacement twist-grip sensor with pre-installed MIL‑SPEC terminals and hardwired harness connection.

€134.34 €181.87

-€17.67

NAMZ OEM-Type Connector — 36-pin ECM connector, male, gray

Compact OEM-style connector engineered for reliable performance and long service life. Made in the U.S.A.

€53.00 €70.67

AMP Mate-n-Lock Connector — 12-pin, male, white

-€1.29

NAMZ AMP Mate-n-Lock Connector — 12-pin, male, white

Top-quality OEM-style replacement connectors and terminals. Easy to use. Made in the USA.

€3.86 €5.15

AMP Mate-N-Lok Wiring Connector — 12-pin, 305 mm (12"), white

-€0.77

NAMZ AMP Mate-N-Lok Wiring Connector — 12-pin, 305 mm (12"), white

Top-quality OEM-style replacement connector and terminals. Easy to use, made in the USA.

€2.31 €3.08

Ready-To-Install Handlebar Wire Extension Kit — 305 mm (12"), Pin, Black

-€8.86

NAMZ Ready-To-Install Handlebar Wire Extension Kit — 305 mm (12"),...

Complete extension wiring kit with pre-crimped Molex terminals, heat shrink, and color-matching wire to extend OEM H-D handlebar switch wiring. Made in the U.S.A.

€26.58 €35.44

Stainless Steel Muffler Clamps — 44.5–50.8 mm clamping diameter, pair

-€8.09

KHROME WERKS Stainless Steel Muffler Clamps — 44.5–50.8 mm clamping...

Durable stainless steel muffler clamps with a 360° reaction block to prevent distortion and corrosion-resistant fasteners for reliable exhaust sealing.

€31.44 €39.53

4-1/2" HP-Plus® Slip-On Mufflers — Black Satin

-€175.88

KHROME WERKS 4-1/2" HP-Plus® Slip-On Mufflers — Black Satin

Dyno-tested: 12% more torque and 7% more power. 4-1/2" HP-Plus® slip-on with absorptive baffle and 16-gauge body. Made in the U.S.A.

€683.98 €859.86

2-into-2 Dominator Exhaust System — 4-1/2 in muffler, 12 & 18 mm O2 bungs, 2-into-2 system

-€430.01

KHROME WERKS 2-into-2 Dominator Exhaust System — 4-1/2 in muffler, 12 & 18...

Performance-focused 2-into-2 exhaust with enlarged interconnected headers, high-flow stepped primaries, full left-side crossover, removable baffles wrapped in stainless steel wool and high-temp fiberglass; heavy-duty AccuSeal clamps included. Made in USA.

€1,672.30 €2,102.31

SH Series Sindered Rear Brake Pads — 9.9 mm thickness, 81.9 mm length

-€12.38

TRW SH Series Sindered Rear Brake Pads — 9.9 mm thickness, 81.9 mm...

Sintered metallic rear brake pads designed for reliable stopping and wide disc compatibility. Match friction to SV pad; confirm original equipment before use.

€26.52 €38.90

SH Series Sindered Rear Brake Pads — 91.5 × 58.1 × 7 mm, sintered metal

-€17.35

TRW SH Series Sindered Rear Brake Pads — 91.5 × 58.1 × 7 mm,...

Sintered rear brake pads for rear use only; matched friction to SV pad and compatible with most disc types.

€22.84 €40.19

SH Series Sindered Rear Brake Pads — 10.0 mm thickness, 85.7 mm length

-€18.21

TRW SH Series Sindered Rear Brake Pads — 10.0 mm thickness, 85.7...

Rear-brake pads engineered for reliable, consistent performance. Compatible with most disc types; use only on bikes originally fitted with sintered pads.

€23.95 €42.16

Round Floating Brake Rotor — 300 mm (11.8"), 5-hole, 82.55 mm bolt circle, 5.0 mm thickness

-€38.97

TRW Round Floating Brake Rotor — 300 mm (11.8"), 5-hole, 82.55 mm...

Two-piece floating brake rotor with precision-ground surface to reduce vibration and improve braking feel. Sold each; order two for dual-rotor setups.

€151.53 €190.50

WME Series Rear Shocks — HD035WME02V2, black

-€66.43

BITUBO S.R.L. WME Series Rear Shocks — HD035WME02V2, black

High-performance radial piston design with straight flow for fast response
Anti-block and anti-fading systems for reliable damping
50/30-click rebound and compression adjusters
Progressive spring with threaded preload; adjustable for solo or two-up riding

€383.90 €450.33

Gooden-Tite Swingarm Reinforcement Bushing Kit — ALLOY ART, GT-SA2, Swingarm kit

-€24.52

ALLOY ART Gooden-Tite Swingarm Reinforcement Bushing Kit — ALLOY ART,...

Reduces motor flop while preserving vibration damping. Fits stock OEM rear engine isolator mounts. Made in the USA.

€69.31 €93.83

Carbon Fiber Clutch Plate Kit — carbon fiber friction, steel drive plates

-€51.09

BARNETT Carbon Fiber Clutch Plate Kit — carbon fiber friction, steel...

High-friction carbon composite friction plates with precision steel drive plates; made in the U.S.A.

€198.68 €249.77

Competition Adjustable Front Stabilizer Link — Front, Aluminum, Raw or Machined

-€41.06

ALLOY ART Competition Adjustable Front Stabilizer Link — Front,...

Adjustable front stabilizer link for HD Touring frames with reverse-thread rod end and ARP stainless bolts; available in black anodized, gold anodized, or machined finish. Made in the USA.

€116.05 €157.11

Gooden-Tite ISO Front Engine Mount — Front, Aluminum, GTMM-1

-€32.94

ALLOY ART Gooden-Tite ISO Front Engine Mount — Front, Aluminum, GTMM-1

CNC-machined base plate with cast high-performance polyurethane isolator bushings. Made in the U.S.A.

€93.08 €126.02

-€13.02

ALLOY ART Heavy-Duty Handlebar Riser Bushings — Riser, Polished Silver

Precision riser bushings that reduce play and dampen handlebar vibration. Made in USA.

€36.81 €49.83

Patriot Series Pivoting Handlebar Risers — 1" clamp, 2" rise, Black

-€32.03

ROX SPEED FX Patriot Series Pivoting Handlebar Risers — 1" clamp, 2" rise,...

Patented pivoting risers for customizable bar position
Mounts on most V‑Twin machines with an open mounting area
Simple bolt‑on installation; secure top and bottom clamping
Made in the USA; verify cable and brake line length before installation

€90.51 €122.54

Steel Handlebar 25.4 mm (1") — Mystic bend, Chrome

-€18.00

TRW Steel Handlebar 25.4 mm (1") — Mystic bend, Chrome

High quality steel tube construction
Three-part anti-corrosion coating
Multiple shapes available
No matte chrome on bends
Available in chrome, black or aluminum
Accepts H-D OEM heated grips

€50.90 €68.90

-€13.68

TRW 25.4 mm (1") Steel Handlebar — 25.4 mm, Speedfighter, Chrome

Attractive design and improved steering response. Top quality surface treatments and a triple coating to prevent corrosion.

€38.65 €52.33

$25.4 mm (1\") Steel Handlebar — 90 cm (35-1/2\") width, Drag bend, Chrome$

-€16.60

TRW 25.4 mm (1\") Steel Handlebar — 90 cm (35-1/2\") width, Drag...

Attractive design with refined geometry for improved steering response and rider comfort. Triple-coat surface treatment prevents corrosion.

€35.58 €52.18

-€26.72

KHROME WERKS HP-Plus® Performance Baffles — 4" and 4-1/2" fit, Pair, Silver

Performance inserts for 4" and 4-1/2" mufflers. Adjustable tone via bolt-held inserts. Easy installation with basic hand tools; change sound in minutes.

€103.91 €130.63

Extra Plate Clutch Kit — Steel drive plate, DuPont™ Kevlar® friction

-€34.48

BARNETT Extra Plate Clutch Kit — Steel drive plate, DuPont™ Kevlar®...

Six bonded friction plates, one metal drive plate and heavy-duty springs; increases contact area by ~20%; wet or dry use; Made in USA.

€134.13 €168.61

-€8.74

NAMZ LED Headlamp Adapter Harness — 30.5 cm (12") cable, Black

Adapter harness for installing Daymaker LED headlamps. Made in the USA.

€26.23 €34.97

shop by category

Home

Best sellers

Contact us

Products

Our company

shop by category

Home  

Best sellers

Home