Best sellers

Tab-Tite™ Spring Loaded Holder — fits 7–8 in tablets, Black

-€5.97

RAM MOUNTS Tab-Tite™ Spring Loaded Holder — fits 7–8 in tablets, Black

Spring-loaded holder secures 7–8 in tablets with a case; compatible with B and C size RAM® round ball bases; made from high-strength composites.

€23.24 €29.21

Cush Drive Dampener — Green, OEM compatible

-€13.03

ALLOY ART Cush Drive Dampener — Green, OEM compatible

High-quality replacement dampener that fits like OE rubber and installs like stock. Will not deteriorate or compress like the OE dampener, providing a much longer lifetime. Made in the USA.

€36.82 €49.85

-€57.93

BILTWELL Utility Mirror Round Short Arm — Black

Round short-arm utility mirror with long perch, stainless-steel pivot, wide-angle tempered glass, and switchable bezel hardware.

€62.02 €119.95

Gooden Tight™ Handlebar Riser Bushing Kit for Harley Davidson — 4-pack, Silver

-€18.70

ALLOY ART Gooden Tight™ Handlebar Riser Bushing Kit for Harley Davidson...

Revolutionary vibration reduction and improved ride comfort, made in the U.S.A.

€52.84 €71.54

Extra Plate Clutch Kit — Aramid fiber friction plates, Steel drive plates

-€42.80

BARNETT Extra Plate Clutch Kit — Aramid fiber friction plates, Steel...

High-density friction plates increase surface area by 11% for longer clutch life; precision-manufactured drive plates; made in the U.S.A.

€166.47 €209.27

-€32.64

THOR Blitz XR Boots — Over-Calf, US 11, Red

Breathable padded mesh, injection-molded abrasion and shin protection, steel shank for support, and three adjustable straps for a secure, customized fit.

€92.31 €124.95

-€27.17

BILTWELL O/S Speeds Clamps — 25.4–31.75 mm (1"–1-1/4"), Black

Clean solution for installing select stock and aftermarket Harley-Davidson® gauge brackets. CNC-machined 6061 billet aluminum. Reducer shims for 1" and 1-1/4" risers.

€76.78 €103.95

-€47.53

NAMZ Twist Grip Sensor — Harley-Davidson, throttle-by-wire

Direct replacement twist-grip sensor with pre-installed MIL‑SPEC terminals and hardwired harness connection.

€134.34 €181.87

-€17.67

NAMZ OEM-Type Connector — 36-pin ECM connector, male, gray

Compact OEM-style connector engineered for reliable performance and long service life. Made in the U.S.A.

€53.00 €70.67

AMP Mate-n-Lock Connector — 12-pin, male, white

-€1.29

NAMZ AMP Mate-n-Lock Connector — 12-pin, male, white

Top-quality OEM-style replacement connectors and terminals. Easy to use. Made in the USA.

€3.86 €5.15

AMP Mate-N-Lok Wiring Connector — 12-pin, 305 mm (12"), white

-€0.77

NAMZ AMP Mate-N-Lok Wiring Connector — 12-pin, 305 mm (12"), white

Top-quality OEM-style replacement connector and terminals. Easy to use, made in the USA.

€2.31 €3.08

Ready-To-Install Handlebar Wire Extension Kit — 305 mm (12"), Pin, Black

-€8.86

NAMZ Ready-To-Install Handlebar Wire Extension Kit — 305 mm (12"),...

Complete extension wiring kit with pre-crimped Molex terminals, heat shrink, and color-matching wire to extend OEM H-D handlebar switch wiring. Made in the U.S.A.

€26.58 €35.44

-€8.35

BILTWELL Foot Peg Mounts — Black, female mount

Investment-cast 4130 chromoly steel mounts with a threaded interface for easy angle adjustment; secure with the stock pivot pin or 3/8" bolts and nuts.

€23.60 €31.95

WME Series Rear Shocks — HD035WME02V2, black

-€66.43

BITUBO S.R.L. WME Series Rear Shocks — HD035WME02V2, black

High-performance radial piston design with straight flow for fast response
Anti-block and anti-fading systems for reliable damping
50/30-click rebound and compression adjusters
Progressive spring with threaded preload; adjustable for solo or two-up riding

€383.90 €450.33

412 Series Shocks — 305 mm (12.00") , Black

-€89.65

PROGRESSIVE SUSPENSION 412 Series Shocks — 305 mm (12.00") , Black

Durable, cost-effective suspension upgrade designed for Harley models. Five-position preload adjuster; measured center-to-center; check fitment and clearance before installation. Made in the USA.

€348.66 €438.31

412 Series Shocks — 318 mm (12.50 in) extended length, Black, rear

-€74.89

PROGRESSIVE SUSPENSION 412 Series Shocks — 318 mm (12.50 in) extended length, Black,...

Designed for Harley models. Five-position preload adjuster for easy tuning. Multiple style options and built for durable, cost-effective performance. Made in the USA. Review fitment and clearance notes before installation.

€291.25 €366.14

412 Series Shocks — 305 mm (12 in) extended length, rear, black

-€74.89

PROGRESSIVE SUSPENSION 412 Series Shocks — 305 mm (12 in) extended length, rear, black

Durable, cost-effective replacement shocks designed for Harley models. Five-position cam-style preload adjuster. Measured center-to-eyelet. May require chain/belt guard spacing on some '86–'15 XL models. Check road-use certificate before purchase.

€291.25 €366.14

412 Series Shocks — 279.40 mm (11.00") extended, Black

-€74.89

PROGRESSIVE SUSPENSION 412 Series Shocks — 279.40 mm (11.00") extended, Black

Durable, cost-effective shock upgrade for many Harley models with a five-position preload adjuster. Check fitment and clearance before installation.

€291.25 €366.14

422 Series Shocks — Rear coilover monotube, gas-charged, chrome

-€124.83

PROGRESSIVE SUSPENSION 422 Series Shocks — Rear coilover monotube, gas-charged, chrome

Fully adjustable shocks with progressive-rate springs and monotube dampers. Nitrogen-charged to reduce oil cavitation and fade; adjustable up to 2" lower than stock. Confirm fitment before installation.

€485.44 €610.27

Gooden-Tite Swingarm Reinforcement Bushing Kit — ALLOY ART, GT-SA2, Swingarm kit

-€24.52

ALLOY ART Gooden-Tite Swingarm Reinforcement Bushing Kit — ALLOY ART,...

Reduces motor flop while preserving vibration damping. Fits stock OEM rear engine isolator mounts. Made in the USA.

€69.31 €93.83

Carbon Fiber Clutch Plate Kit — carbon fiber friction, steel drive plates

-€51.09

BARNETT Carbon Fiber Clutch Plate Kit — carbon fiber friction, steel...

High-friction carbon composite friction plates with precision steel drive plates; made in the U.S.A.

€198.68 €249.77

Competition Adjustable Front Stabilizer Link — Front, Aluminum, Raw or Machined

-€41.06

ALLOY ART Competition Adjustable Front Stabilizer Link — Front,...

Adjustable front stabilizer link for HD Touring frames with reverse-thread rod end and ARP stainless bolts; available in black anodized, gold anodized, or machined finish. Made in the USA.

€116.05 €157.11

Gooden-Tite ISO Front Engine Mount — Front, Aluminum, GTMM-1

-€32.94

ALLOY ART Gooden-Tite ISO Front Engine Mount — Front, Aluminum, GTMM-1

CNC-machined base plate with cast high-performance polyurethane isolator bushings. Made in the U.S.A.

€93.08 €126.02

-€24.84

BILTWELL Macho Seat Hinge — Black, Gray

Second-generation 4130 chromoly seat hinge with an investment-cast pivot head, bronze pivot brushings, and chrome shoulder bolt.

€70.22 €95.06

Torque™ Handlebar/Rail Mount Base with 1" Ball — fits 28.6/31.8/39 mm handlebars, Black

-€5.18

RAM MOUNTS Torque™ Handlebar/Rail Mount Base with 1" Ball — fits...

Low-profile mount base secures personal electronics and small accessories in high-vibration environments. Nylon-insert locknuts prevent loosening; sizing inserts protect rails and ensure a snug fit.

€20.16 €25.34

$Thruster Bar Grips — handlebar diameter 25.4 mm (1\"), length 12.7 cm (5\"), flat chocolate$

-€3.98

BILTWELL Thruster Bar Grips — handlebar diameter 25.4 mm (1\"), length...

Comfortable Thruster bar grips with injection-molded Krayton rubber and shock-absorbing surface; throttle sleeve not included.

€13.51 €17.49

-€3.98

BILTWELL Thruster Bar Grips — 25.4 mm (1"), 127 mm (5"), White

Injection-molded Krayton grips with classic surface patterns; throttle sleeve not included.

€13.51 €17.49

-€13.02

ALLOY ART Heavy-Duty Handlebar Riser Bushings — Riser, Polished Silver

Precision riser bushings that reduce play and dampen handlebar vibration. Made in USA.

€36.81 €49.83

-€2.37

RAM MOUNTS Pin-Lock Security Knob — 1" fit for B-size arms, Black

Low-profile Pin-Lock security knob with 1/4"-20 female thread; replaces knobs on 1" B-size arms to prevent slippage.

€9.23 €11.60

-€3.08

RAM MOUNTS GoPro® Camera Adapter — 1" ball, GoPro compatible, Black

Patented rubber ball adapter that dampens shock and vibration and offers multiple articulation points for secure, adjustable GoPro® mounting. Camera not included.

€11.99 €15.07

shop by category

Home

Best sellers

Contact us

Products

Our company

shop by category

Home  

Best sellers

Home