Best sellers (7)

-€6.76

DRAG SPECIALTIES Easy Find Kickstand Extension — Chrome

Makes hard-to-reach kickstands easier to operate; includes mounting hardware. Drilling required.

€19.10 €25.86

-€1.34

DRAG SPECIALTIES Kickstand Spring — 104.1 mm length, chrome

Durable component for secure kickstand operation; easy to install and maintain.

€3.78 €5.12

-€18.68

DRAG SPECIALTIES Fork Slider Covers — 165.1 mm, Black

Steel construction. Inspect clearance before installation; bottom area may need slight forming to clear lower legs and fender.

€52.80 €71.48

Fork Slider Bushings — 49.00 mm (1.93"), lower mount, 19.63 mm (0.77"), pair

-€2.97

DRAG SPECIALTIES Fork Slider Bushings — 49.00 mm (1.93"), lower mount, 19.63 mm...

Replacement OE-style slider bushings made in Japan. Replace bushings and seals whenever the front forks are disassembled to maintain performance.

€6.35 €9.32

-€22.99

DRAG SPECIALTIES Fork Leg Rebuild Kit — 49 mm (1.93")

Complete kit with all parts for rebuilding front fork legs (unless noted).

€64.99 €87.98

-€17.78

DRAG SPECIALTIES Fork Leg Rebuild Kit — 41 mm fork tube, Fork Slider

Complete kit containing all parts required to rebuild a front fork leg assembly (unless noted).

€50.24 €68.02

Suprema Spina Tire Warmer — M/XL, Front ≤125/17, Rear ≤200/55-17, Black

-€27.18

CAPIT Suprema Spina Tire Warmer — M/XL, Front ≤125/17, Rear...

Direct mains-powered warmers with a single preset temperature, fast uniform heating to 90°C, waterproof polyester construction, and a three-year guarantee.

€271.82 €299.00

Inner Tube — 150/80-16, 6.00"-16, 16" rim, Center Metal Valve, Heavy-duty

-€5.29

DRAG SPECIALTIES Inner Tube — 150/80-16, 6.00"-16, 16" rim, Center Metal Valve,...

Durable motorcycle inner tubes available in multiple valve configurations and custom sizes for wide wheels.

€11.33 €16.62

-€16.50

DRAG SPECIALTIES Wheel Bearing Kit — 25 mm inside diameter, rear

Complete wheel bearing kit. Follow OEM procedures when installing and checking bearing end play.

€35.38 €51.88

Wheel Bearing Kit — 25 mm inside diameter, Front/Rear, without ABS

-€4.61

DRAG SPECIALTIES Wheel Bearing Kit — 25 mm inside diameter, Front/Rear, without...

Replacement wheel bearing kit. Follow OEM procedures for installation and checking end play.

€9.86 €14.47

-€18.65

DRAG SPECIALTIES Front Axle Kit — 25.4 mm diameter, 25.38 cm length, Chrome

Complete axle kit with spacers, nuts and washers. Models with ABS need only one spacer.

€52.72 €71.37

Wheel Spacer — 25.4 mm axle, 24.9 mm length, 38.1 mm outside diameter

-€3.67

DRAG SPECIALTIES Wheel Spacer — 25.4 mm axle, 24.9 mm length, 38.1 mm outside...

OEM replacement wheel spacer with a polished finish for reliable, accurate wheel mounting.

€10.38 €14.05

$Live To Ride Custom Mirrors — 5/16\"-18, 76 mm (3\"), 15 cm (6\"), Chrome, Gold$

-€11.49

DRAG SPECIALTIES Live To Ride Custom Mirrors — 5/16\"-18, 76 mm (3\"), 15 cm...

Die-cast construction with embossed eagle
"Live to Ride" script detail
Durable, corrosion-resistant finish
Adjustable mirror angle for improved visibility

€32.45 €43.94

Chrome Steel Brake Line Fitting — -3 AN Male, 3/8-24 SAE Male, Chrome

-€1.55

DRAG SPECIALTIES Chrome Steel Brake Line Fitting — -3 AN Male, 3/8-24 SAE Male,...

Durable brake line fitting for secure, leak-resistant hydraulic connections. Made in the U.S.A.

€4.40 €5.95

-€2.20

DRAG SPECIALTIES Cargo Net — 38 cm (15") x 38 cm (15"), plastic hooks, black

Elastic cargo net with 2.5" x 2.5" mesh; secures loads quickly and stores compactly.

€6.23 €8.43

$Internal Fuel Line — 7.9 mm (5/16\"), 20.5 cm (8\"), Fuel-injected$

-€1.91

DRAG SPECIALTIES Internal Fuel Line — 7.9 mm (5/16\"), 20.5 cm (8\"),...

Internal line that routes fuel from the pump to the filter for reliable delivery.

€5.41 €7.32

Fuel Tank Crossover Line — 7.9 mm (5/16"), 26 cm (10-1/4"), Silver

-€8.24

DRAG SPECIALTIES Fuel Tank Crossover Line — 7.9 mm (5/16"), 26 cm (10-1/4"),...

Replaces stock rubber lower crossover lines with durable metal lines. Compression fittings provide a positive seal. Made in the USA.

€23.30 €31.54

Chrome 40 Spoke Custom Rim — 21x2.15, 40-hole, chrome, requires custom spokes

-€23.66

DRAG SPECIALTIES Chrome 40 Spoke Custom Rim — 21x2.15, 40-hole, chrome,...

Steel rim with rolled edge for added strength. Manufactured in Japan. Rim only.

€66.85 €90.51

Round Sissy Bar for Hardtail Models — 381 mm (15"), fits rigid frames with 10" axle plate spacing, Chrome

-€29.10

DRAG SPECIALTIES Round Sissy Bar for Hardtail Models — 381 mm (15"), fits rigid...

Chrome-plated round sissy bar for hardtail frames; fits axle plates approximately 10" apart.

€82.24 €111.34

-€4.20

DRAG SPECIALTIES Acorn Nut Sets — 10-pack, Silver

Individual packs of acorn nuts. Made in the U.S.A.

€11.85 €16.05

-€17.47
Out of Stock

DRAG SPECIALTIES OEM Fuel Gauge — Black face, white readout

OEM-style fuel gauge with clear analog readout and simple installation.

€49.36 €66.83

-€13.80

TERRY COMPONENTS Battery Cable Kit — 4 AWG, 33 cm (13")

Tinned copper battery cable kit with flexible silicone jacket and pure copper lugs for dependable cranking power. Made in the USA.

€53.66 €67.46

-€28.29

DRAG SPECIALTIES Alternator Rotor — 12V, 38A

Direct OEM replacement with encapsulated magnets in a reinforced steel shell for enhanced durability and consistent output.

€79.94 €108.23

-€29.36

DRAG SPECIALTIES Ignition Coil — 12 V, 30,000 V, black

Improves starting and high-speed stability, increases peak spark voltage by at least 20%, and helps improve mileage.

€82.95 €112.31

-€23.13

DRAG SPECIALTIES Passenger Foot Peg Mount Kits — Chrome, left and right mounts

Kits include left and right-side mounts with hardware. Accepts most male-mount footpegs.

€65.35 €88.48

-€4.23

DRAG SPECIALTIES Extended Shift Peg — 83 mm (3-1/4"), Black

Extended shift peg designed to absorb vibration; hollow-core neoprene insert cleats. Screws into shifter arm. Sold each.

€11.97 €16.20

Stainless Steel Brake Line Kit — 42 cm, 44 cm, Front/Lower/Upper, Silver clear-coated

-€34.76

DRAG SPECIALTIES Stainless Steel Brake Line Kit — 42 cm, 44 cm,...

Braided brake line kit with chrome steel fittings; made in the U.S.A.

€98.25 €133.01

-€72.88

DRAG SPECIALTIES Clutch Shell — Part 148141

High-quality replacement clutch shell with starter gear; includes center bearing and snap rings.

€205.97 €278.85

-€36.40
Out of Stock

DRAG SPECIALTIES High Performance Oil Pump — High volume, Steel

Improves oil pressure and volume, reduces oil carryover at high rpm, 53mm rotors, die-cast aluminum body with high-strength steel gears. Fits stock and aftermarket cam support plates; not compatible with Screaming Eagle cam plate.

€102.95 €139.35

Custom Gas Tank — 11.4 L (3 US gal), tunnel 3", 20" L, 11" W, raw

-€49.54

DRAG SPECIALTIES Custom Gas Tank — 11.4 L (3 US gal), tunnel 3", 20" L, 11" W, raw

TIG-welded custom gas tank with chrome mounting hardware; deep tunnel and approximate 23" tab spacing; vented cap sold separately; must be sealed before use.

€140.00 €189.54

shop by category

Home

Best sellers

Contact us

Products

Our company

shop by category

Home  

Best sellers

Home