Best sellers (33)

Extended Reach RoadSofa™ Seat — Extended reach, 42 cm (16-1/2") driver length

-€136.74

SADDLEMEN Extended Reach RoadSofa™ Seat — Extended reach, 42 cm...

Comfort-focused Extended Reach RoadSofa™ Seat with split-cushion design, gel-enhanced foam, tall lumbar support, and classic button-tufted styling.

€530.02 €666.76

Lattice Stitch Step-Up Seat — 76 cm (30") overall, 38 cm (15") driver, 30.5 cm (12") driver width, Black/Orange

-€112.19

Lattice Stitch Step-Up Seat — 76 cm (30") overall, 38 cm (15")...

Gel-core interior and molded foam for balanced support and comfort. Water-resistant self-skinning surface for enhanced durability. Retro lattice-stitch styling, designed and made in the USA.

€428.87 €541.06

-€132.28

DRAG SPECIALTIES SEATS EZ-ON Mount Low-Profile Solo Seat — 60.5 cm length, 30.5 cm...

Lower-profile solo seat with flexible urethane foam, EZ-On Mount System included, carpeted ABS base protects paint; made in the USA.

€292.00 €424.28

DRAG SPECIALTIES Bezel Dipstick — Black

Restores a clean finish around the dipstick opening; includes replacement push nut for installation.

€12.26

Custom Gas Tank — 11.4 L (3 US gal), tunnel 3", 20" L, 11" W, raw

-€49.54

DRAG SPECIALTIES Custom Gas Tank — 11.4 L (3 US gal), tunnel 3", 20" L, 11" W, raw

TIG-welded custom gas tank with chrome mounting hardware; deep tunnel and approximate 23" tab spacing; vented cap sold separately; must be sealed before use.

€140.00 €189.54

Tough-Claw™ Mount with Level Cup™ Drink Holder — Clamp 5/8"–1-1/2", fits 2-1/2"–3-1/2", Black

-€8.20

RAM MOUNTS Tough-Claw™ Mount with Level Cup™ Drink Holder — Clamp...

High-strength composite and stainless steel clamp mount with Level Cup™ self-leveling drink holder; clamps 5/8"–1-1/2", fits 2-1/2"–3-1/2".

€38.27 €46.47

Medium Tough-Claw™ with 1" Diameter Rubber Ball — clamp 1"–1-7/8", black

-€7.39

RAM MOUNTS Medium Tough-Claw™ with 1" Diameter Rubber Ball — clamp...

Secure mounting clamp with rubber ball for 1"–1-7/8" diameters; high-strength nylon and stainless hardware for stable, quick installation.

€34.52 €41.91

Torque™ Handlebar/Rail Mount Base with 1" Ball — Fits 19 mm (3/4"), 22 mm (7/8"), 25.4 mm (1")

-€4.41

RAM MOUNTS Torque™ Handlebar/Rail Mount Base with 1" Ball — Fits 19 mm...

Low-profile handlebar and rail mount secures personal electronics and small accessories. Nylon-insert locknuts and sizing inserts prevent loosening and protect the rail.

€20.58 €24.99

1" Whiskey Throttle Assembly — 1" handlebar, Polished

-€24.38

BILTWELL 1" Whiskey Throttle Assembly — 1" handlebar, Polished

Cast clamshell throttle assembly with chrome-plated ferrules and machined grip tube; fits stock H-D thread-in and clip-in cables.

€79.25 €103.63

-€54.49

AVON GRIPS Heated Grips — 25.4 mm (1"), 14 cm (5-1/2"), Black

Soft serrated Kraton rubber grips with 6061 billet aluminum spike end caps and collars; heated for rider comfort.

€177.32 €231.81

-€1.28

EMGO Gran Turismo Grips — 13.5 cm (5-1/4"), 25.4 mm (1"), Gold

Vintage-style motorcycle grips with extra cushioning and a 5-1/4" length.

€4.15 €5.43

-€13.47

AVON GRIPS Custom Spike End Grips — 25.4 mm (1"), 12.7 cm (5"), Black

Ergonomic seamless grip technology, billet end caps and collars, spiked style, made in the USA.

€62.73 €76.20

Knurled Grips — 25.4 mm (1"), black, anodized

-€12.36

ARLEN NESS Knurled Grips — 25.4 mm (1"), black, anodized

Knurled rubber grips with billet end caps for improved hand traction; matching footpegs and shifter pegs sold separately.

€57.71 €70.07

$Custom Rubber Radial Grips — 25.4 mm (1\") handlebar, 13 cm (5-1/8\") length$

-€5.10

JOKER MACHINE Custom Rubber Radial Grips — 25.4 mm (1\") handlebar, 13 cm...

Retro-style radial grips offering soft-compound comfort and easy slip-on installation. Trim caps sold separately.

€19.85 €24.95

DRAG SPECIALTIES Clutch Master Cylinder Rebuild Kit — 17.5 mm (11/16"), Raw

OEM-style rebuild kit with precision seals, springs and hardware to restore reliable hydraulic control.

€29.45

-€18.07

DRAG SPECIALTIES Switch Cap Kit — 13-button, Chrome

Update worn switch caps quickly with a simple installation. Radio and cruise control switches not included; order separately.

€41.00 €59.07

Can Bus Handlebar Control Module — 48" harness, left mount, chrome

-€42.52

DRAG SPECIALTIES Can Bus Handlebar Control Module — 48" harness, left mount,...

IP66-rated handlebar control module with included switch and wire harness. Not for use with Softail models that feature cruise control.

€93.00 €135.52

DRAG SPECIALTIES OEM-Style Lever — Clutch, Hydraulic, Polished Silver

OEM-style control lever designed to fit stock hand controls for a direct replacement.

€23.45

DRAG SPECIALTIES Wide Blade Replacement Clutch Lever — Black, Matte

Replacement clutch lever compatible with OEM lever perches for a direct fit and straightforward installation.

€16.95

-€2.05

RAM MOUNTS Pin-Lock Security Knob — 1" fit for B-size arms, Black

Low-profile Pin-Lock security knob with 1/4"-20 female thread; replaces knobs on 1" B-size arms to prevent slippage.

€9.55 €11.60

-€1.66

RAM MOUNTS Ball Adapter with AMPS Plate — 1" ball, AMPS 1.5" x 1.188", Black

1" B-size rubber ball on a 2" x 1.7" square base with four pre-drilled holes forming the 1.5" x 1.188" AMPS pattern.

€7.78 €9.44

-€2.66

RAM MOUNTS GoPro® Camera Adapter — 1" ball, GoPro compatible, Black

Patented rubber ball adapter that dampens shock and vibration and offers multiple articulation points for secure, adjustable GoPro® mounting. Camera not included.

€12.41 €15.07

-€1.94

RAM MOUNTS Mount Adapter — Black, Ball

Marine-grade construction and corrosion-resistant finish
1" rubber ball
Predrilled base holes for multiple mount options

€9.07 €11.01

$Double Socket Arm with Swivel — 25.4 mm (1\") handlebar, Black$

-€4.87

RAM MOUNTS Double Socket Arm with Swivel — 25.4 mm (1\") handlebar, Black

High-strength composite double 1" ball-socket arm with 360° center rotation and 180° swivel; rubber ball ends and central pivot for exceptional adjustability. 5" overall length.

€22.72 €27.59

-€3.48

RAM MOUNTS Double Socket Arm — 3", fits 1" rubber ball, Black

Marine-grade double socket arm; fits 1" rubber ball, bases and adapters for versatile mounting.

€16.22 €19.70

1-1/4" Monkey Drag Bar Handlebar — 1-1/4" diameter, 14" rise, 1" clamp, 11" center width, Chrome

-€139.02

PAUL YAFFE BAGGER NATION 1-1/4" Monkey Drag Bar Handlebar — 1-1/4" diameter, 14" rise,...

Low-profile Monkey Bar-style handlebar drilled for internal wiring and notched for throttle-by-wire; fits most '84-'17 models (excludes Springers, FLT/FLHT, XL 883C/1200C).

€516.20 €655.22

1-1/4" Bobber Ape Hanger Handlebar — 1-1/4" diameter, 16" rise, 36-1/2" width, Chrome

-€53.25

KHROME WERKS 1-1/4" Bobber Ape Hanger Handlebar — 1-1/4" diameter, 16"...

Forward-and-up grip angle for classic bobber ergonomics. Diamond-knurled center and pre-drilled dimples for late-model controls. Made in the U.S.A.

€305.16 €358.41

-€61.12

DRAG SPECIALTIES 1-1/4" Buffalo T-Bar — 1-1/4" diameter, 30" width, black gloss

Comfort-oriented T-bar handlebar. Optional gauge mounts sold separately. Made in the U.S.A. Not for use with stock risers on 883C/1200C models. Compatible with hydraulic clutch controls.

€199.00 €260.12

-€20.35

KHROME WERKS 1" Handlebar — 1" clamp, 27-1/4" width

Durable drag-style handlebar with 14-gauge steel tubing. Made in the U.S.A.

€94.95 €115.30

DRAG SPECIALTIES Easy Find Kickstand Extension — Chrome

Makes hard-to-reach kickstands easier to operate; includes mounting hardware. Drilling required.

€25.86

shop by category

Home

Best sellers

Contact us

Products

Our company

shop by category

Home  

Best sellers

Home