Best sellers (2)

Europe Only Battery — AGM, 12V 12Ah, 200A CCA, 145×152.4×87.3 mm

-€15.23

DRAG SPECIALTIES BATTERIES Europe Only Battery — AGM, 12V 12Ah, 200A CCA, 145×152.4×87.3 mm

Extra cranking power for high-performance engines
Optimized for European fitments
Reliable starting in demanding conditions

€137.03 €152.26

-€10.05

DRAG SPECIALTIES Alternator Rotor — 12V 54A

Direct OEM replacement with encapsulated magnets in a reinforced steel shell for lasting durability.

€90.44 €100.49

-€6.31

DRAG SPECIALTIES Solid-State Regulator — 12V 32A, Black

Reliable solid-state voltage regulation; sealed against moisture and shock; no relay contacts to wear or adjust.

€56.81 €63.12

-€17.26

DRAG SPECIALTIES Solid-State Regulator — 12V, 60A, Black

High-reliability voltage control unit with sealed construction for moisture and shock protection.

€155.39 €172.65

-€5.15

DRAG SPECIALTIES Solid-State Regulator — 12V, 15 A, Black

High-reliability solid-state regulator with rugged construction and environmental sealing to protect against moisture and shock.

€46.39 €51.54

-€28.23

DRAG SPECIALTIES 1.4 kW High-Performance Starter Motor — 12 V, Black

New replacement unit engineered for greater cranking power, wider fitment, and durable internal components.

€254.04 €282.27

-€9.38

DRAG SPECIALTIES Side Hinge Ignition Switch — Chrome, 2-position

Reliable ignition switch for motorcycles; includes two keys; durable and easy to install.

€84.40 €93.78

-€12.79

DRAG SPECIALTIES Inner Fairing Cap Switch Kit — Black

Complete four-switch kit for inner fairing cap: spotlight/driving light, speaker, cruise control and accessory switch.

€115.12 €127.91

-€6.05

DRAG SPECIALTIES Spark Plug Wires — 8.8 mm, Black, Set

High-temperature spark plug wires rated SAE Class E J2031 with a continuous operating temperature of 450°F. Made in the United States.

€54.47 €60.52

$Rear Brake Master Cylinder — 19.1 mm (3/4\"), Chrome, Polished$

-€11.09

DRAG SPECIALTIES Rear Brake Master Cylinder — 19.1 mm (3/4\"), Chrome, Polished

Complete, fully assembled rear master cylinder for quick installation.

€99.80 €110.89

-€9.29

DRAG SPECIALTIES Caliper Rebuild Kit — Rear, Black

High-quality replacement components for caliper rebuilds. Restores braking performance and reliability.

€83.62 €92.91

-€8.93

DRAG SPECIALTIES Passenger Foot Peg Mount Kits — left & right mounts, black gloss

Includes left and right-side mounts with hardware and accepts most male-mount style footpegs.

€80.38 €89.31

-€6.35

DRAG SPECIALTIES XL Front Fender — Fits 16" and 17" wheels, Unfinished

Steel construction with a raw finish. Pre-drilled for easy installation and mounts with OEM hardware.

€57.13 €63.48

-€18.89

DRAG SPECIALTIES OEM Rear Fender — 24 cm (9-1/2"), Unfinished

Direct OE-style replacement, pre-drilled and ready for original taillight and hardware.

€170.03 €188.92

-€16.13

DRAG SPECIALTIES SHOCKS Replacement Shock Absorber — 292 mm (11.5"), rear, black

Steel monotube shocks with progressively wound springs, adjustable preload, and installation using existing hardware. OEM upper mount covers are not compatible.

€145.12 €161.25

Premium Ride-Height Adjustable Shocks — 330 mm (13"), lifts 12.7 mm (0.5"), lowers 12.7 mm (0.5"), rear

-€33.87

DRAG SPECIALTIES SHOCKS Premium Ride-Height Adjustable Shocks — 330 mm (13"), lifts...

Dual-rate progressive wound springs for a smoother ride
Adjustable spring preload for tuning
Mounts with existing hardware
Shorter-than-OEM units may reduce travel and affect handling
Not compatible with rear lowering kits

€304.81 €338.68

Premium Ride-Height Adjustable Shocks — Rear, 279.4 mm extended, ±12.7 mm ride-height

-€33.36

DRAG SPECIALTIES SHOCKS Premium Ride-Height Adjustable Shocks — Rear, 279.4 mm...

Nitrogen-charged monotube shocks with dual-rate progressive springs, adjustable preload and ride-height; mounts with existing hardware.

€300.27 €333.63

Carbon Fiber Clutch Plate Kit — carbon fiber friction, steel drive plates

-€51.09

BARNETT Carbon Fiber Clutch Plate Kit — carbon fiber friction, steel...

High-friction carbon composite friction plates with precision steel drive plates; made in the U.S.A.

€198.68 €249.77

-€13.33

DRAG SPECIALTIES Manual Primary Chain Adjuster — 5/8"–7/8", Black

Stops over-tightening, reduces sprocket and transmission bearing stress, and enables correct 5/8"–7/8" chain adjustment. Requires removal of the primary cover; instructions included.

€119.99 €133.32

-€9.21

DRAG SPECIALTIES Manifold Absolute Pressure Sensor — Black, Orange

High-quality replacement that restores accurate intake pressure readings for improved engine performance and fuel economy.

€82.87 €92.08

-€6.14

DRAG SPECIALTIES Crank Position Sensor — Black

High-quality replacement sensor that restores accurate crank position readings and smooth engine operation.

€55.23 €61.37

-€5.81

DRAG SPECIALTIES Lifter Cover — Pair, Black gloss

Includes gaskets and screws; durable cast construction; supplied as a matching set.

€52.34 €58.15

-€6.09

DRAG SPECIALTIES Spark Plug/Head Bolt Cover — Chrome

Kit for two heads; includes mounting hardware for a clean, easy installation.

€54.82 €60.91

-€15.64

DRAG SPECIALTIES Cam Cover — Chrome

Die-cast construction with OEM-spec bushings; includes oil seal, mounting hardware and gasket.

€140.78 €156.42

-€5.16

DRAG SPECIALTIES Motor Mount — Black, Front

Durable motor mount engineered to reduce engine vibration and out-last the stock unit.

€46.47 €51.63

-€12.50

DRAG SPECIALTIES Isolator Engine Mount — Rear, Black

High-quality replacement motor mount that meets or exceeds OEM specs and installs with OEM hardware.

€112.48 €124.98

-€16.41

DRAG SPECIALTIES Oil Pump Assembly — Aluminum finish, Standard flow

High-quality cast aluminum oil pump assembly with steel gears; gaskets and seals included.

€147.70 €164.11

-€15.47

DRAG SPECIALTIES Oil Pump Assembly — Aluminum

High-quality replacement oil pump; gaskets and seals included. Mounting hardware sold separately.

€139.25 €154.72

Backrest Pad for Square Sissy Bars — 51 mm (2") thick, 14 cm (5-1/2") wide

-€10.27

DRAG SPECIALTIES SEATS Backrest Pad for Square Sissy Bars — 51 mm (2") thick, 14 cm...

Fits 9/16 x 2" Drag Specialties and most Harley-Davidson sissy bars with 4" ID; includes brackets, screws, and all mounting hardware. Made in the USA.

€92.39 €102.66

-€22.78

DRAG SPECIALTIES Quick Connect Clutch Cable — 38" length, 2-5/16" travel, Black

Quick Connect braided upper cable replaces the OE upper section for faster installation and smooth, long-lasting operation.

€64.36 €87.14

shop by category

Home

Best sellers

Contact us

Products

Our company

shop by category

Home  

Best sellers

Home