Internal Parts (41)

-€42.78
Out of Stock

FEULING OIL PUMP CORP. HP+ One Piece Pushrods — Fixed Length, 4 Pack

One-piece 4130 chromoly pushrods with swedged ends, 7/16" diameter and 0.165" wall. Heat-treated with black oxide, stock lengths, compatible with stock, Screamin' Eagle and Feuling cams. Made in the U.S.A.

€166.35 €209.13

-€42.78
Out of Stock

FEULING OIL PUMP CORP. HP+ One Piece Pushrods — Fixed length, 4 pack

Non-adjustable one-piece 4130 chromoly pushrods with swedged ends. 7/16" diameter, 0.165" wall, heat-treated with black oxide finish. Stock replacement lengths compatible with stock, Screamin' Eagle and Feuling camshafts.

€166.35 €209.13

-€79.25
Out of Stock

SLYFOX Pushrod Covers — Set of 4

Pre-preg and autoclaved full carbon fiber pushrod covers. Lightweight, heat-resistant, precision molded for a flush fit.

€308.17 €387.42

-€73.78
Out of Stock

S&S CYCLE Hydraulic Tappets — Set of 4

Precision hydraulic tappets hand-fit and pressure-tested for high-performance engines.

€287.50 €361.28

-€46.77
Out of Stock

EASTERN MOTORCYCLE PARTS Tappet — Oversize (+0.005")

Precision tappet for reliable valve operation. Made in the U.S.A.

€50.08 €96.85

Race Series® Full-Travel Hydraulic Lifters — 0.200" travel, 0.8425" size, set of 4

-€68.49
Out of Stock

FEULING OIL PUMP CORP. Race Series® Full-Travel Hydraulic Lifters — 0.200" travel,...

Full-travel hydraulic lifters with .200" travel for large-lift cams; maintain critical oil flow, reduce valve float, and improve valvetrain stability. Recommended for strip and performance street engines.

€266.35 €334.84

$Powerglide II Hydraulic Tappets — Oversize +0.005\", 0.8470\" diameter$

-€47.80
Out of Stock

JIMS Powerglide II Hydraulic Tappets — Oversize +0.005\", 0.8470\"...

High-capacity hydraulic tappets developed for increased load, lubrication and service life; billet body and wider rollers.

€185.91 €233.71

-€46.22
Out of Stock

JIMS Powerglide™ Steady Roll Tappets — Standard, Hydraulic, JIMS 1827

Hydraulic tappets with a Steady Roll bronze bushing replacing the needle roller; increased load, lubrication and life capacities; billet steel body and hand-honed hydraulic cavity.

€179.76 €225.98

Hydraulic Tappet Assemblies — Oversize (+0.003"), Set of 4

-€149.54
Out of Stock

S&S CYCLE Hydraulic Tappet Assemblies — Oversize (+0.003"), Set of 4

Precision-machined hydraulic tappet assemblies that eliminate valve-train noise and provide reliable, maintenance-free operation.

€581.53 €731.07

Race Series® Full-Travel Hydraulic Lifters — 0.843–0.8435 in, set of 4

-€73.65
Out of Stock

FEULING OIL PUMP CORP. Race Series® Full-Travel Hydraulic Lifters — 0.843–0.8435 in,...

Full-travel hydraulic lifters with .200" travel, machined steel construction, slower bleed-down for high-lift cams; recommended for strip and performance street engines.

€286.41 €360.06

-€131.44
Out of Stock

JIMS Solid Adjustable Tappet Kit — JIMS 5525

4340 chromoly pushrods with solid adjustable tappets for aggressive cam profiles and high RPM; made in the U.S.A.

€511.17 €642.61

Race Series® Short-Travel Hydraulic Lifters — 0.8420"–0.8423", Short-Travel, Hydraulic

-€70.20
Out of Stock

FEULING OIL PUMP CORP. Race Series® Short-Travel Hydraulic Lifters — 0.8420"–0.8423",...

Short-travel hydraulic lifters engineered to reduce valve float and oil aeration, improving high-RPM stability and consistency. Set of 4.

€273.01 €343.21

Race Series® Short-Travel Hydraulic Lifters — +0.843" - 0.8435", Set of 4

-€70.20
Out of Stock

FEULING OIL PUMP CORP. Race Series® Short-Travel Hydraulic Lifters — +0.843" -...

Short-travel hydraulic lifters that reduce valve float and oil aeration to improve high-RPM stability and quiet operation. Spin-Tron dyno developed and track proven.

€273.01 €343.21

Race Series® Short-Travel Hydraulic Lifters — +0.8435" - 0.844", set of 4

-€70.20
Out of Stock

FEULING OIL PUMP CORP. Race Series® Short-Travel Hydraulic Lifters — +0.8435" -...

Short-travel design reduces valve float and oil aeration to increase RPM, improve valve-train stability, and deliver consistent track-proven performance. Made in the U.S.A.

€273.01 €343.21

-€7.79
Out of Stock

FEULING OIL PUMP CORP. Anti-Rotation Lifter Pins — Standard, 2 Pack

Recommended max clearance between lifter and anti-rotation pin: 0.002" - 0.003". Excessive clearance causes excessive noise and increased wear.

€30.28 €38.07

-€378.72
Out of Stock

S&S CYCLE Super Stock® Cylinder Head Kit — Stock Bore Cylinder, 90-1498

Completely assembled cylinder heads with gaskets and hardware; stock appearance with improved flow. Use OEM manifolds and exhaust.

€1,472.80 €1,851.52

Super Stock® Cylinder Head Kit — 3-5/8" bore, high-compression, aluminum

-€449.10
Out of Stock

S&S CYCLE Super Stock® Cylinder Head Kit — 3-5/8" bore,...

Completely assembled cylinder head kit with gaskets and hardware; stock appearance with improved flow. Made in the USA.

€1,746.55 €2,195.65

Super Stock® Cylinder Head Kit — 3-5/8" bore, O-Ring intake, Aluminum

-€397.73
Out of Stock

S&S CYCLE Super Stock® Cylinder Head Kit — 3-5/8" bore, O-Ring intake,...

Completely assembled Super Stock® heads with .590" lift valve springs; includes gaskets and hardware. Uses OEM manifolds and exhaust. Made in the USA.

€1,549.74 €1,947.47

-€12.03
Out of Stock

EASTERN MOTORCYCLE PARTS Rocker Box Stud Kit — 8 Pack

Includes eight long studs, two short studs and one top motor mount stud. One kit required per head.

€34.00 €46.03

79 cc Super Stock® Cylinder Head — Powder-coated wrinkle black

-€398.13
Out of Stock

S&S CYCLE 79 cc Super Stock® Cylinder Head — Powder-coated wrinkle black

Fully assembled 79 cc Super Stock® cylinder heads — large valves, high port flow; fits 88"–103" motors, ideal up to 110".

€1,548.27 €1,946.40

-€330.15
Out of Stock

S&S CYCLE Performance Replacement Head — 82 cc, Natural Aluminum

Fully assembled replacement head optimized for smaller displacement engines. Intake manifold and gasket kits sold separately.

€1,283.93 €1,614.08

79 cc Super Stock® Cylinder Head — fits 88–110 cu in, Silver powder-coated

-€422.41
Out of Stock

S&S CYCLE 79 cc Super Stock® Cylinder Head — fits 88–110 cu in, Silver...

Pair of fully assembled 79 cc Super Stock® cylinder heads offering large intake and exhaust valves, strong low/midrange response, and compatibility with 88"–110" engines. Does not include rocker arm components, intake manifold, or gaskets.

€1,642.69 €2,065.10

-€398.13
Out of Stock

S&S CYCLE 79 cc Super Stock® Cylinder Heads — powder-coated silver

Fully assembled heads with springs and valves; designed for stock 88 in–103 in engines and modified engines up to 110 in. Supports camshafts up to .650 in lift. Not for use with pistons that have a pop-up dome; not compatible with specified touring Twin-Cooled models.

€1,548.27 €1,946.40

-€398.13
Out of Stock

S&S CYCLE 79 cc Super Stock® Cylinder Heads — Wrinkle Black

Fully assembled 79 cc Super Stock® heads with valves and springs; improved compression and strong low‑to‑midrange response. Not compatible with certain touring models.

€1,548.27 €1,946.40

-€398.13
Out of Stock

S&S CYCLE 89 cc Super Stock® Cylinder Heads — Silver, Powder-coated

Fully assembled heads for '06–'16 stock crankcases. Large intake and exhaust valves, high-flow ports, and S&S® valve springs supporting up to 0.650" lift. Suited for touring and heavier bikes; check compatibility for models with compression releases.

€1,548.27 €1,946.40

-€784.13
Out of Stock

S&S CYCLE Retro Top-End Conversion Kit — Stock Bore Cylinder

Give your Shovelhead a Panhead appearance. Complete head kit with rocker hardware, tappets, pushrods, gaskets and assembly hardware; fits 1966–1984 Big Twins. Does not include pan covers.

€3,049.40 €3,833.53

-€784.13
Out of Stock

S&S CYCLE Retro Top-End Conversion Kit — 3.625 in bore

Gives a Shovelhead the nostalgic Panhead look. Includes S&S P-series heads, roller rockers, hydraulic tappets, pushrods and all required gaskets and hardware. Compatible with 66-84 Big Twins. Pan covers not included.

€3,049.40 €3,833.53

-€5.21
Out of Stock

EASTERN MOTORCYCLE PARTS Top Motor Mount Studs — 4 pack

Durable mounting hardware delivers secure clamping, corrosion resistance, and precise fit. Made in the U.S.A.

€14.74 €19.95

Super Stock® Cylinder Head Kit — 3-5/8" bore, dual spark plug, aluminum

-€449.10
Out of Stock

S&S CYCLE Super Stock® Cylinder Head Kit — 3-5/8" bore, dual spark plug,...

Fully assembled cylinder head kit with gaskets and hardware; stock look with improved flow; fits OEM manifolds and exhaust. Made in the USA.

€1,746.55 €2,195.65

-€410.27
Out of Stock

S&S CYCLE Super Stock® Cylinder Head Kit — 3-5/8" bore, aluminum

Complete, ready-to-install cylinder head kit with improved flow and all required gaskets and hardware. Use with OEM manifolds and exhaust.

€1,595.48 €2,005.75

Contact us

Products

Our company