Internal Parts (3)

-€59.36

FEULING OIL PUMP CORP. HP+® Hydraulic Lifters — 0.8420 in, set of 4

Performance hydraulic roller lifters, CNC-machined to extend top-end life. Requires removal of rocker covers and rocker arm supports for installation with one-piece pushrods.

€230.83 €290.19

-€62.22

FEULING OIL PUMP CORP. Race Series® Solid Lifters — Diameter 0.842–0.8425 in, Set of 4

Solid lifters designed for high spring pressures and large-lift cams; improve valvetrain stability, reduce valve float and increase rpm and power.

€241.94 €304.16

Race Series® Full-Travel Hydraulic Lifters — 0.8420"–0.8423", hydraulic, full-travel, set of 4

-€73.65

FEULING OIL PUMP CORP. Race Series® Full-Travel Hydraulic Lifters — 0.8420"–0.8423",...

Full-travel hydraulic lifters with .200" travel for high-lift cams; slower bleed-down, maintains critical oil flow, set of 4, made in USA; recommended over 185 lb seat pressure.

€286.41 €360.06

Race Series® Full-Travel Hydraulic Lifters — 0.8435–0.844 in, set of 4

-€73.65

FEULING OIL PUMP CORP. Race Series® Full-Travel Hydraulic Lifters — 0.8435–0.844 in,...

Full-travel hydraulic lifters with .200" of travel for high-lift cams; slower bleed-down rate improves valvetrain stability and reduces valve float.

€286.41 €360.06

-€7.59

FEULING OIL PUMP CORP. Anti-Rotation Lifter Pins — Oversize (+0.002"), 2-pack

Controls lifter rotation and alignment. Recommended clearance 0.002"–0.003". Helps minimize valve train noise.

€29.55 €37.14

-€11.51

FEULING OIL PUMP CORP. Cylinder Head Plates — Cylinder, Pair

Replaces factory Screamin' Eagle® head plates; fastens with heavy-duty sticky tape. Made in the U.S.A.

€33.51 €45.02

Cylinder Head Breathers — 6061 T6 aluminum, anodized red, pair

-€99.18

FEULING OIL PUMP CORP. Cylinder Head Breathers — 6061 T6 aluminum, anodized red, pair

Precision-machined billet construction with square sealing surfaces.
Longer exit nipples with dual O-rings for improved sealing.
Optimized inlet sizing and placement for efficient engine breathing.
Five internal drain ports for controlled drainage and splash resistance.

€386.43 €485.61

-€16.25

FEULING OIL PUMP CORP. Rocker Shaft Shims — 3 Packs of 6, Rocker Shaft

Tightens rocker arm end play to reduce noise; recommended side clearance 0.0035"–0.005". Helps reduce wear on M8 cylinder head standoffs. Professional installation required.

€63.23 €79.48

-€92.33

FEULING OIL PUMP CORP. HP+® High Volume Oil Pump — High-Flow, 6061 billet aluminum

Direct stock-replacement pump that eliminates blow-by and wet sumping; increases oil pressure and cooling; FEULING® design; made in USA.

€359.07 €451.40

-€92.33

FEULING OIL PUMP CORP. HP+® High Volume Oil Pump — High-Flow, Aluminum

Stock-replacement high-volume oil pump that eliminates blow-by and wet sumping. High-flow 2” gerotor gears, precision tolerances, and cooler oil temps for more rear-wheel power. Made in the USA.

€359.07 €451.40

Race Series® Oil Pump — 7075 billet aluminum, Red anodized, Part 7062

-€114.49

FEULING OIL PUMP CORP. Race Series® Oil Pump — 7075 billet aluminum, Red anodized,...

Blueprinted race oil pump that increases oil pressure and return volume, reduces sumping, and improves engine temperatures and power. Stock replacement for Twin Cam engines.

€445.24 €559.73

-€192.05

FEULING OIL PUMP CORP. HP+® Oil System Pack — Aluminum, Kit

Complete kit to finish a T/C® engine oiling system; increases oil pressure and flow, reduces temperatures, and includes pump, lifters and cam installation kit.

€746.85 €938.90

Race Series® Oil System Performance Pack — 7075 billet aluminum, red

-€234.06

FEULING OIL PUMP CORP. Race Series® Oil System Performance Pack — 7075 billet...

Complete kit to finish T/C® engine oiling systems; raises oil pressure and flow, reduces temperatures and wet sumping.

€910.23 €1,144.29

-€7.05

FEULING OIL PUMP CORP. Block Off Cam Plate — FEULING PARTS, P/N 8016

Seals hydraulic chain-tensioner openings for gear-driven cam installations. Made in the USA. Prevents oil leaks and simplifies assembly.

€27.41 €34.46

-€61.06

FEULING OIL PUMP CORP. OE+ Oil Pump — 6061 billet aluminum, aluminum finish

Direct-fit Feuling® OE+ replacement oil pump that increases oil pressure and scavenge return volume; competitively priced and made in the U.S.A.

€237.47 €298.53

-€61.06

FEULING OIL PUMP CORP. OE+ Oil Pump — Aluminum

Feuling® OE+ billet oil pump is a direct stock-replacement that increases oil pressure and scavenge return volume; high-flow 2" gerotor gears; made in the U.S.A.

€237.47 €298.53

-€122.14

FEULING OIL PUMP CORP. OE+ Oil Pump/Camplate Kit — Gear drive, Standard flow

Precision billet oil pump and matched camplate increase oil pressure and scavenging volumes. Includes camplate relief valve pre-set to 50–60 psi, added oil feed holes and cam journal groove for improved lubrication. Kit includes pump, camplate, retainer plate, and hardware.

€474.99 €597.13

OE+ Oil Pump/Camplate Kit — Oil pump, cam support, chain drive

-€122.14

FEULING OIL PUMP CORP. OE+ Oil Pump/Camplate Kit — Oil pump, cam support, chain drive

Billet OE+ oil pump and matched camplate kit — pre-set 50–60 psi relief, increased lubrication and scavenging; includes retainer plate and hardware. Made in the USA.

€474.99 €597.13

High Pressure / High Volume Oil Pump for M-Eight — 2.250" Chrome Moly gerotor gears, natural finish

-€97.88

FEULING OIL PUMP CORP. High Pressure / High Volume Oil Pump for M-Eight — 2.250"...

Improves oil flow and pressure for M-Eight engines; increases scavenge and bearing oil volume, bench-tested to spec.

€380.61 €478.49

-€231.75

FEULING OIL PUMP CORP. HP+® Oil System Packs for M8 — Kit, Red

High-flow oil system kit for M8 engines — increases oil flow, pressure and scavenge; includes pump, high-flow camplate, hydraulic lifters and installation hardware.

€901.25 €1,133.00

-€97.88

FEULING OIL PUMP CORP. High Pressure / High Volume Oil Pump for M-Eight — HP+®, Natural

High-flow 2.250" chrome moly gerotor gears for increased oil volume
Precision-machined relief valve; bench tested to seat at 30 psi, pop-off 55–60 psi
42% more scavenge volume and 68% more oil to bearings versus stock
Magnet protection and corrected passages to reduce wet sumping and blow-by
Requires matching high-flow cam plate (part #0932-0192) for optimized scavenge

€380.61 €478.49

Race Series® Oil Pump — Red anodized, 7075 billet aluminum

-€114.49

FEULING OIL PUMP CORP. Race Series® Oil Pump — Red anodized, 7075 billet aluminum

High-flow oil pump for M-Eight engines that increases oil and scavenge volume, improves pressure control, lowers oil and engine temperatures, and requires the High Flow cam plate (part #0932-0192). Made in the USA.

€445.24 €559.73

Pressure Relief Valve, Springs and Plunger — Oil pump, P/N 8026

-€2.95

FEULING OIL PUMP CORP. Pressure Relief Valve, Springs and Plunger — Oil pump, P/N 8026

Replacement spring and plunger assembly for oil pump pressure relief valve — increases pop‑off psi and restores proper bypass control. Bench‑test with PART #3801-0071.

€9.32 €12.27

-€6.12

FEULING OIL PUMP CORP. Pressure Relief Valve, Springs and Plunger — Oil pump, 6-pack

Precision-machined plunger and spring set to restore and control pressure relief pop-off. Increases pop-off psi; bench test with PART #3801-0071. Made in the USA.

€23.81 €29.93

OE+ Oiling System/Cam Chest Freshen Up Kit — High Volume, '07-'17 Chain Drive

-€376.80

FEULING OIL PUMP CORP. OE+ Oiling System/Cam Chest Freshen Up Kit — High Volume,...

Freshen the cam chest and oiling passages on late-model Twin Cam engines. Complete set with pump, camplate, lifters, sprockets, chains, bearings, hardware and gaskets.

€1,064.85 €1,441.65

Mikuni Air Cleaner Adapter — fits HSR 42/45, S&S E/G and Keihin CV, Silver

-€17.15

TRASK Mikuni Air Cleaner Adapter — fits HSR 42/45, S&S E/G and...

Mounts S&S E/G or Keihin CV style air cleaners to Mikuni HSR 42/45 carburetors. Made in the USA.

€66.68 €83.83

-€85.27

FEULING OIL PUMP CORP. Cylinder Stud and Head Bolt Kit — FEULING PARTS 3000

Complete kit with eight cylinder studs and eight head bolts, plus moly assembly lubricant and thread sealant; precision J-formed threads reduce galling and help prevent gasket failure.

€331.60 €416.87

Cylinder Stud and Head Bolt Kit — Chromoly steel, black, kit

-€69.56

FEULING OIL PUMP CORP. Cylinder Stud and Head Bolt Kit — Chromoly steel, black, kit

Complete kit with eight heat-treated 8740 chromoly studs, eight polished head bolts, moly lubricant, and thread sealant; precision J-formed threads prevent galling.

€270.56 €340.12

-€30.70

FEULING OIL PUMP CORP. Cylinder Stud Kit — Chromoly steel

Precision J-form cylinder stud kit with eight studs, moly assembly lubricant, and thread sealant. Stock replacement and reusable; manufactured by ARP® in the USA.

€119.36 €150.06

-€28.46

FEULING OIL PUMP CORP. Cylinder Stud Kit — Chromoly steel, Chrome finish

High‑strength cylinder stud kit with precision J‑form threads. Includes eight studs, moly assembly lubricant and thread sealant; reusable and made in the USA.

€110.67 €139.13

Contact us

Products

Our company