Handlebars & Controls

-€43.03
Out of Stock

TODD'S CYCLE Grips — 25.4 mm (1"), Chrome

Unique, one-piece brass grips usually found on top-end customs. Fits 1" handlebars. Made in the USA.

€167.33 €210.36

Bone Bar Handlebar Clamp & Riser Kit — 25.4 mm rise & clamp, 1/2-13 thread, Black gloss

-€74.43
Out of Stock

TODD'S CYCLE Bone Bar Handlebar Clamp & Riser Kit — 25.4 mm rise & clamp,...

Billet aluminum clamp and riser kit with one-piece clamp; riser tapped for 1/2"-13 bolts. Made in the USA.

€173.69 €248.12

1-3/4" Slimline Handlebar Risers — Rise 44.5 mm, Clamp 25.4 mm, Polished

-€53.45
Out of Stock

BILTWELL 1-3/4" Slimline Handlebar Risers — Rise 44.5 mm, Clamp 25.4...

Slimline risers featuring investment-cast stainless steel construction. Fit 1" bars, accept stock 1/2" x 13 mounting hardware, and include 5/16"-18 stainless Allen clamp screws.

€99.26 €152.71

-€117.83
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar—thick-wall steel, polished welds, slotted for internal wiring. No knurling or electronic throttle control notch. Made in the U.S.A.

€274.94 €392.77

-€112.45
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar — Thick-wall steel with polished welds, slotted for internal wiring; no knurling or electronic throttle control notch. Made in the U.S.A.

€262.39 €374.84

-€117.83
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar — the 'Stripper' style bar used on many of Todd's Cycle customs; thick-wall steel, polished welds, slotted for internal wiring. Made in the U.S.A.

€274.94 €392.77

-€112.21
Out of Stock

TODD'S CYCLE [object Object]

Low‑profile 1" Strip Handlebar made from thick‑wall steel with polished welds, slotted for internal wiring. No knurling or electronic throttle control notch. Made in the U.S.A.

€261.84 €374.05

-€106.86
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar: thick-wall steel with polished welds, slotted for internal wiring, no knurling or throttle-control notch; made in the U.S.A.

€249.33 €356.19

-€80.10
Out of Stock

TODD'S CYCLE [object Object]

Classic 1-1/4" Blackline Club Handlebar — mounts with stock hardware, slotted for internal wiring, made in the U.S.A.

€311.52 €391.62

1" Whiskey Throttle Assembly — 1" handlebar diameter, Polished

-€36.27
Out of Stock

BILTWELL 1" Whiskey Throttle Assembly — 1" handlebar diameter, Polished

Cast aluminum clamshell and machined throttle tube; includes chrome-plated ferrules and plated Allen cap hardware. Fits stock H-D thread-in and clip-in cables. Sold as an assembly.

€67.36 €103.63

$1\" Whiskey Throttle Assembly — Black, Powder-Coated$

-€36.27
Out of Stock

BILTWELL 1\" Whiskey Throttle Assembly — Black, Powder-Coated

Dual-cable throttle assembly with cast clamshell, chrome-plated steel ferrules, plated Allen cap mounting hardware, and a machined throttle tube for rubber grips.

€67.36 €103.63

-€47.77
Out of Stock

BILTWELL [object Object]

1" OD, .120" (3 mm) wall seamless 4130 chromoly handlebar — mandrel-bent on a CNC bender and TIG-welded. For aftermarket/custom applications. Not notched for TBW.

€135.01 €182.78

Murdock Handlebar Risers — 10" rise, 1" clamp

-€123.37
Out of Stock

BILTWELL Murdock Handlebar Risers — 10" rise, 1" clamp

Investment-cast one-piece top clamp with TIG-welded 4130 chromoly uprights. Fits 1" bars and common speedo/tach clamp patterns on many stock model year Harleys.

€229.11 €352.48

Murdock Handlebar Risers — 12" rise, 1" clamp, Chrome

-€123.74
Out of Stock

BILTWELL Murdock Handlebar Risers — 12" rise, 1" clamp, Chrome

Investment-cast one-piece top clamp with TIG-welded 4130 chromoly uprights; fits many stock Harley speedo/tach brackets; for 1" bars.

€229.83 €353.57

Murdock Handlebar Risers — 12" rise, 1" clamp, Black Satin

-€119.96
Out of Stock

BILTWELL Murdock Handlebar Risers — 12" rise, 1" clamp, Black Satin

Investment-cast steel one-piece top clamp with TIG welded 0.120" wall 4130 chromoly uprights. Fits 1" bars; clamp bolt patterns fit many stock model year Harleys. Sold as a pair; 12" rise.

€228.49 €348.45

$Bone Bar Handlebar Clamp & Riser Kit — 32 mm (1-1/4\") clamping diameter, 25.4 mm (1\") rise, 1/2-13 thread size, Black gloss$

-€74.43
Out of Stock

TODD'S CYCLE Bone Bar Handlebar Clamp & Riser Kit — 32 mm (1-1/4\")...

High-quality clamp and riser kit for secure handlebar mounting. Includes one-piece riser clamp. Made in the USA.

€173.69 €248.12

-€111.85
Out of Stock

TODD'S CYCLE [object Object]

1" Strip Handlebar — thick-wall steel, slotted for internal wiring, polished welds, no knurling or ETC notch. Made in the U.S.A.

€261.01 €372.86

-€89.07
Out of Stock

TODD'S CYCLE [object Object]

Neutral, low-profile 1-1/4" Strip Handlebar with polished welds, wiring slots, hydraulic clutch compatibility, and Made in the U.S.A.

€346.41 €435.48

-€93.52
Out of Stock

TODD'S CYCLE [object Object]

1-1/4" Bagger Ape Hanger Handlebar compatible with batwing fairing; notched for throttle-by-wire, with large burr-free wiring slots. Supports factory heated grips and stock controls. Made in the U.S.A.

€363.73 €457.25

-€93.52
Out of Stock

TODD'S CYCLE [object Object]

1-1/4" Bagger Ape Hanger handlebar compatible with batwing fairing, notched for throttle-by-wire, with laser-cut wiring slots; supports factory heated grips and stock controls. Made in the U.S.A.

€363.73 €457.25

-€5.60
Out of Stock

BILTWELL Torker Grips — 25.4 mm handlebar, 12.7 cm length, Black

Injection-molded Krayton rubber grips with classic surface textures to absorb shock and dampen vibration. Throttle sleeve not included.

€11.89 €17.49

-€89.25
Out of Stock

TODD'S CYCLE [object Object]

Strip-style 1-1/4" handlebar with polished welds, wiring slots for internal or external routing, hydraulic clutch compatibility, heated-grip ready design, clear sightline to stock mirrors; made in the U.S.A.

€347.13 €436.38

Riser Adapter — 6061-T6 Aluminum, Black, Flat

-€53.69
Out of Stock

SLYFOX Riser Adapter — 6061-T6 Aluminum, Black, Flat

Allows mounting of tall risers or T-bars while maintaining the stock gauge module location. Replaces the existing riser and clamp and mounts with factory hardware. 3-1/2" on-center, 1/2" riser mounting holes. Gauge cover modification and ignition relocation or delete may be required. Made in USA.

€208.78 €262.47

Handlebar Riser Kit — 25.4 mm (1") clamp, 38.1 mm (1-1/2") pullback, 150 mm (6") rise, Black gloss

-€130.10
Out of Stock

SLYFOX Handlebar Riser Kit — 25.4 mm (1") clamp, 38.1 mm (1-1/2")...

Includes top clamp and mounting hardware. Made in the USA. Easy to install; improves rider ergonomics and control.

€303.56 €433.66

Handlebar Riser Kit — 25.4 mm (1") clamp, 3.5" spacing, 38.1 mm pullback, 25.5 cm rise, Black gloss

-€136.94
Out of Stock

SLYFOX Handlebar Riser Kit — 25.4 mm (1") clamp, 3.5" spacing, 38.1...

Bolt-on riser kit with top clamp and hardware included. Made in the USA. Precision machined for a secure fit.

€319.53 €456.47

1-1/4" Strip Handlebar — 32 mm (1-1/4") diameter, 75 cm (29-1/2") width, 30.5 cm (12") rise, Chrome

-€89.25
Out of Stock

TODD'S CYCLE 1-1/4" Strip Handlebar — 32 mm (1-1/4") diameter, 75 cm...

Polished welds; slotted for internal or external wiring; compatible with hydraulic clutch; works with heated grips; clear line of sight to stock mirrors; made in the U.S.A.

€347.13 €436.38

$1-1/4\" Strip Handlebar — 32 mm clamp, 32\" width, 12\" rise, flat black$

-€89.25
Out of Stock

TODD'S CYCLE 1-1/4\" Strip Handlebar — 32 mm clamp, 32\" width, 12\" rise,...

Strip-style handlebar with slotted wiring, compatible with hydraulic clutches and heated grips. Polished welds; made in the U.S.A.

€347.13 €436.38

1-1/4" Strip Handlebar — 85 cm (33-1/2") width, 35.5 cm (14") rise, 32 mm (1-1/4") clamp, flat black

-€89.07
Out of Stock

TODD'S CYCLE 1-1/4" Strip Handlebar — 85 cm (33-1/2") width, 35.5 cm (14")...

Strip-style handlebar with polished welds and slotted wiring; compatible with hydraulic clutches and heated grips. Made in the U.S.A.

€346.41 €435.48

Alumicore Grips — 1" handlebar, 5" length, Black polished

-€73.50
Out of Stock

BILTWELL Alumicore Grips — 1" handlebar, 5" length, Black polished

High-strength forged aluminum grips with a TPZ rubber sleeve and an integrated TBW gear interface for reliable engagement.

€136.50 €210.00

-€14.41
Out of Stock

SLYFOX Grips — 25.4 mm (1"), Chrome

Comfortable motorcycle grips with reliable traction. Sold as a pair.

€56.05 €70.46

shop by category

Handlebars & Controls

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls