Handlebars & Controls (7)

V-Twin MOTO Handlebar — 28.6 mm (1-1/8") diameter, 82 mm rise, 80 cm (31-1/2") width, Silver

-€30.08

ODI V-Twin MOTO Handlebar — 28.6 mm (1-1/8") diameter, 82 mm rise,...

7075-T6 alloy construction for strength and lightness.

Shot-peened, hard anodized finish; slotted and TBW-notched for clean wiring.

Laser-etched graphics and knurled clutch side for improved grip.

€85.00 €115.08

-€34.01

ODI V-Twin MOTO Handlebar — 28.6 mm clamping diameter, 80 cm width

7075-T6 construction, slotted for internal wiring, notched for throttle-by-wire, knurled left side for improved grip.

€96.10 €130.11

V-Twin Tracker Handlebar — 28.6 mm (1-1/8") clamp, 70 mm rise, 76 cm (30") width, Black

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm (1-1/8") clamp, 70 mm rise,...

Lightweight 7075-T6 alloy tracker handlebar, shot-peened and hard anodized black, slotted for internal wiring, notched for throttle-by-wire, knurled left side, laser-etched ODI graphics, made in the U.S.A.

€85.00 €115.08

V-Twin Tracker Handlebar — 28.6 mm clamp, 30" width, 70 mm rise, Silver anodized

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm clamp, 30" width, 70 mm...

High-strength 7075-T6 alloy Tracker handlebar with shot-peened, hard-anodized finish; slotted for internal wiring and notched for TBW.

€85.00 €115.08

V-Twin MOTO Handlebar — 25.4 mm (1") diameter, 80 cm (31-1/2") width, 82 mm rise, anodized silver

-€30.08

ODI V-Twin MOTO Handlebar — 25.4 mm (1") diameter, 80 cm (31-1/2")...

7075-T6 alloy moto handlebar with hard-anodized finish, slotted for internal wiring and notched for throttle-by-wire.

€85.00 €115.08

V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 70 mm rise, 76 cm (30") width

-€34.93

ODI V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 70 mm rise, 76...

7075-T6 alloy tracker handlebar with shot-peened, hard-anodized finish; slotted for internal wiring, notched for TBW, laser-etched ODI graphics, knurled left side for improved grip; made in the U.S.A.

€98.73 €133.66

V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 30" (76 cm) width, 70 mm rise

-€30.08

ODI V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 30" (76 cm)...

Tracker-style handlebar with internal wiring slots, TBW notches, knurled clutch end, and laser-etched ODI graphics. Made in the U.S.A.

€85.00 €115.08

-€23.51

BILTWELL Utility Mirror Round Short Arm — Short arm, Black

Round short-arm mirror with die-cast aluminum construction, stainless-steel pivot, wide-angle tempered glass, and switchable bezel mounting for left or right installation.

€66.44 €89.95

-€57.93

BILTWELL Utility Mirror Round Short Arm — Black

Round short-arm utility mirror with long perch, stainless-steel pivot, wide-angle tempered glass, and switchable bezel hardware.

€62.02 €119.95

-€47.77

BILTWELL Utility Mirror Round Short Arm — Black

Die-cast aluminum round mirror with long perch, stainless-steel ball pivot, wide-angle tempered glass; convertible bezel mounting; available in round and teardrop shapes.

€135.01 €182.78

-€52.26

BILTWELL Utility Mirror Round Short Arm — Chrome, Pair

Injection die-cast aluminum bezel and perch for lightness and durability
Long perch for an unobstructed view over the rider's shoulder
Stainless-steel ball pivot and mounting hardware
Large wide-angle tempered glass for road and highway use
Swap hardware for left- or right-hand bar end installation on select styles

€147.69 €199.95

$1\" Handlebar — 1\" clamp, 69 cm (27.25\") width, Chrome$

-€38.62
Out of Stock

BILTWELL 1\" Handlebar — 1\" clamp, 69 cm (27.25\") width, Chrome

Seamless 4130 chromoly handlebar with CNC mandrel bends and TIG-welded joints. For aftermarket/custom applications; not notched for TBW.

€64.35 €102.97

$1\" T-Bar — 30\" width, 8\" rise, 1\" diameter, black gloss$

-€85.76

BILTWELL 1\" T-Bar — 30\" width, 8\" rise, 1\" diameter, black gloss

Precision-mitered, TIG-welded T-bar with mandrel-bent tubing for smooth bends and reliable fit.

€142.89 €228.65

-€91.33

BILTWELL 1" T-Bar — 1" diameter, 8" rise, 30" width, Chrome

4130 chromoly construction with mandrel-bent curves and precision TIG-welded joints for reliable performance.

€152.15 €243.48

1" T-Bar — 30" width, 10" rise, 1" diameter

-€102.46

BILTWELL 1" T-Bar — 30" width, 10" rise, 1" diameter

Precision-mandrel bent chromoly T-bar with TIG-welded, precision-mitered joints for smooth bends and durable performance.

€170.69 €273.15

Kickback Handlebar Risers — 4" rise, 1-1/2" pullback, 1" clamping diameter, Chrome

-€38.21
Out of Stock

BARON Kickback Handlebar Risers — 4" rise, 1-1/2" pullback, 1"...

Comfort-focused pullback risers that reduce reach and relieve shoulder, neck and back pain. Each riser features its own cap for mounting accessories and includes mounting hardware and instructions. Easy to install and compatible with most stock lines and cables.

€148.58 €186.79

1-3/4" Slimline Handlebar Risers — Rise 44.5 mm, Clamp 25.4 mm, Polished

-€39.91

BILTWELL 1-3/4" Slimline Handlebar Risers — Rise 44.5 mm, Clamp 25.4...

Slimline risers featuring investment-cast stainless steel construction. Fit 1" bars, accept stock 1/2" x 13 mounting hardware, and include 5/16"-18 stainless Allen clamp screws.

€112.80 €152.71

1" Whiskey Throttle Assembly — 1" (25.4 mm) handlebar, Polished

-€27.08

BILTWELL 1" Whiskey Throttle Assembly — 1" (25.4 mm) handlebar, Polished

Cast aluminum clamshell and throttle tube with chrome-plated ferrules and hardware; fits stock H‑D thread-in and clip-in cables.

€76.55 €103.63

-€27.08

BILTWELL 1" Whiskey Throttle Assembly — 25.4 mm (1") handlebar, black

Cast aluminum clamshell throttle assembly with chrome-plated ferrules and plated Allen hardware; accepts rubber grips and fits stock H-D cables.

€76.55 €103.63

-€16.03

BILTWELL Whiskey Throttle Tube — 25.4 mm (1") handlebar diameter, Black

CNC-machined 6061-T6 aluminum throttle tube that lets you fit softer aftermarket grips and routes two cables through a machined channel.

€45.31 €61.34

-€47.77
Out of Stock

BILTWELL [object Object]

1" OD, .120" (3 mm) wall seamless 4130 chromoly handlebar — mandrel-bent on a CNC bender and TIG-welded. For aftermarket/custom applications. Not notched for TBW.

€135.01 €182.78

Murdock Handlebar Risers — 10" rise, 1" clamp

-€92.13

BILTWELL Murdock Handlebar Risers — 10" rise, 1" clamp

Investment-cast one-piece top clamp with TIG-welded 4130 chromoly uprights. Fits 1" bars and common speedo/tach clamp patterns on many stock model year Harleys.

€260.35 €352.48

Murdock Handlebar Risers — 12" rise, 1" clamp, Chrome

-€92.40

BILTWELL Murdock Handlebar Risers — 12" rise, 1" clamp, Chrome

Investment-cast one-piece top clamp with TIG-welded 4130 chromoly uprights; fits many stock Harley speedo/tach brackets; for 1" bars.

€261.17 €353.57

Murdock Handlebar Risers — 12" rise, 1" clamp, Black Satin

-€88.80

BILTWELL Murdock Handlebar Risers — 12" rise, 1" clamp, Black Satin

Investment-cast steel one-piece top clamp with TIG welded 0.120" wall 4130 chromoly uprights. Fits 1" bars; clamp bolt patterns fit many stock model year Harleys. Sold as a pair; 12" rise.

€259.65 €348.45

Alumicore Grips — 25.4 mm handlebar, 127 mm length, Black, Polished

-€39.83

BILTWELL Alumicore Grips — 25.4 mm handlebar, 127 mm length, Black,...

Forged metal core with a knurled tube covered by a cushioned sleeve for traction and comfort. Integrated internal gear interface prevents disengagement.

€112.57 €152.40

Murdock O/S Risers — 1-1/8" clamp, 6" rise, 0" pullback, Chrome

-€85.02

BILTWELL Murdock O/S Risers — 1-1/8" clamp, 6" rise, 0" pullback, Chrome

Investment-cast one-piece clamp, 4130 chromoly uprights, CNC mounting bases, 2" rearward pullback; polished chrome finish.

€77.93 €162.95

-€3.98
Out of Stock

BILTWELL Torker Grips — 1" handlebar diameter, 5" length, black

Injection-molded Krayton grips with classic surface design to absorb shock and dampen vibration; throttle sleeve not included.

€13.51 €17.49

Vans Grips — 25.4 mm (1") handlebar, 12.7 cm (5") length, Red

-€4.70

ODI Vans Grips — 25.4 mm (1") handlebar, 12.7 cm (5") length, Red

Classic Vans waffle sole pattern with a domed center for improved ergonomics and vibration dampening. Throttle sleeve not included.

€13.27 €17.97

Hart-Luck Signature V-Twin Lock-On™ Grips — 25.4 mm (1") handlebar fit, Black, Graphite

-€18.83

ODI Hart-Luck Signature V-Twin Lock-On™ Grips — 25.4 mm (1")...

Locking clutch-side clamp enables quick installation and removal.

Full-waffle pattern and T15 Torx bolts provide secure, slip-free control.

€53.23 €72.06

Alumicore Grips — 25.4 mm (1") handlebar, 12.7 cm (5") length

-€54.89

BILTWELL Alumicore Grips — 25.4 mm (1") handlebar, 12.7 cm (5") length

Precision-forged aluminum grips with a comfortable rubber sleeve and integrated TBW-compatible gear interface.

€155.11 €210.00

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls