Handlebars & Controls (50)

Throttle Assembly — 1" handlebar, single cable

-€6.38

DRAG SPECIALTIES Throttle Assembly — 1" handlebar, single cable

Complete dual-cable throttle assembly with matching left-hand grip; accepts thread-in cables. Sold as a kit.

€18.02 €24.40

1-1/4" Buffalo Bar Handlebar — 1-1/4" (32 mm), 30" (76 cm), 1" clamp

-€21.58

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" (32 mm), 30" (76 cm), 1"...

Oversized Buffalo bar with slotted/notched sections for Throttle-By-Wire, knurled center for grip, compatible with hydraulic clutch controls, made in the U.S.A.; not for use with stock risers and handlebar clamp/gauge mount on 883C/1200C models.

€73.39 €94.97

Throttle Assembly — 25.4 mm (1") handlebar, Dual cable, Black/Chrome

-€5.41

DRAG SPECIALTIES Throttle Assembly — 25.4 mm (1") handlebar, Dual cable,...

Complete dual-cable throttle assembly with matching left-hand grip; accepts thread-in cables. Sold as a kit.

€15.30 €20.71

Pivot Pin/Clip Kit — Clutch, Brake, 10-pack, Aluminum, Black Polished

-€13.49

DRAG SPECIALTIES Pivot Pin/Clip Kit — Clutch, Brake, 10-pack, Aluminum, Black...

Replacement pin kit for clutch and brake pivot points. Pins and retaining clips included for straightforward installation.

€38.14 €51.63

1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4") diameter, 25.4 mm (1") clamp, 76 cm (30") width

-€21.58

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4") diameter, 25.4...

Classic 1-1/4" Buffalo Bar with drag-style sweep, slotted for Throttle-By-Wire and compatible with hydraulic clutch controls.

€73.39 €94.97

-€1.78

DRAG SPECIALTIES Rear Master Cylinder Cover Gasket — Master cylinder, rear

High-quality replacement cover seal that helps prevent fluid leaks and restores proper sealing.

€5.05 €6.83

$1-1/4\" Buffalo Bar Handlebar — 32 mm (1-1/4\"), 25.4 mm (1\"), Black$

-€27.35

DRAG SPECIALTIES 1-1/4\" Buffalo Bar Handlebar — 32 mm (1-1/4\"), 25.4 mm...

Classic Buffalo sweep handlebar engineered for comfort, secure center knurling, and Throttle-By-Wire compatibility.

€77.30 €104.65

Phatbar & Riser Kit — 32 mm (1-1/4") clamp, 3" rise, 32" width, Black gloss

-€163.76

PERFORMANCE MACHINE (PM) Phatbar & Riser Kit — 32 mm (1-1/4") clamp, 3" rise, 32"...

Complete handlebar and billet riser kit for most Harley-Davidson models. 1-1/4" clamp taper to 1", 3" rise, slots for internal wiring, compatible with cable and electronic throttles.

€462.81 €626.57

-€6.78

ARLEN NESS Dampener Kit — Riser, Black

Must-have kit for aftermarket handlebars or risers; isolates vibration and reduces flex.

€26.39 €33.17

-€2.09

DRAG SPECIALTIES Rear Master Cylinder Cover Gasket — rubber, 77360

High-quality replacement cover seal that restores a reliable, leak-free fit for the hydraulic cover.

€5.91 €8.00

Handlebar Clamp — 25.4 mm (1") clamping diameter, fits '74–'17 models

-€5.19

DRAG SPECIALTIES Handlebar Clamp — 25.4 mm (1") clamping diameter, fits '74–'17...

Die-cast handlebar clamp for compatible models with on-center risers and offset mounting holes.

€14.66 €19.85

-€193.85

S&S CYCLE 1200cc Conversion Kit for XL883 — 3.500" bore, 9.4:1 compression

Ready-to-assemble 1200cc conversion kit for XL883; includes cylinders, pistons (11.2 cc dish), rings and gaskets.

€753.85 €947.70

-€1.81

DRAG SPECIALTIES Chrome Plug for Handlebar Clamps — 12 Pack

Fits any socket-head screw with 1/4\" hex. Sold individually to consumers; dealers sold in packs of 12.

€5.10 €6.91

1200cc Conversion Kit for XL883 — 1200 cc, 3.500 in bore, 9.4:1, powder-coated wrinkle black

-€221.42

S&S CYCLE 1200cc Conversion Kit for XL883 — 1200 cc, 3.500 in bore,...

Quick-fit pistons and premium aluminum cylinders with iron liners. Ready to assemble; no machining or re‑balancing required. Kit includes pistons, rings and gaskets. Must be used with 883 heads.

€871.69 €1,093.11

1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 1" clamping, 9-1/2" center width, Chrome

-€54.89

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 1-1/4" diameter, 1" clamping,...

Classic buffalo-style handlebar engineered for comfort. Knurled center to prevent movement, pre-drilled, accepts heated grips, compatible with hydraulic clutch controls.

€186.60 €241.49

Buffalo Handlebar Clamp — 1" clamping diameter, fits 3-1/2" on-center risers

-€24.93

DRAG SPECIALTIES Buffalo Handlebar Clamp — 1" clamping diameter, fits 3-1/2"...

Billet-aluminum clamp that covers the full clamping area, fits 1" bars sized from 1-1/4", for use with 3-1/2" on-center risers. Made in the USA.

€53.42 €78.35

1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), 84 cm (33"), 25.4 mm (1"), Chrome

-€54.89

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), 84 cm (33"),...

Classic buffalo-bend handlebar with knurled center, pre-drilled holes, and Throttle-By-Wire compatibility. Made in the U.S.A.; compatible with hydraulic clutch controls.

€186.60 €241.49

1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), 30-1/2" width, Chrome

-€73.02

DRAG SPECIALTIES 1-1/4" Buffalo Bar Handlebar — 32 mm (1-1/4"), 30-1/2" width,...

1-1/4" diameter handlebar with 1" clamping area; pre-drilled and notched for Throttle-By-Wire. Compatible with heated grips and hydraulic clutch controls. Not for use with stock risers on 883C/1200C.

€206.36 €279.38

Xtreme SPC+ Case — Black, fits iPad 6 Mini and iPad 7 Mini

-€21.95

SP CONNECT Xtreme SPC+ Case — Black, fits iPad 6 Mini and iPad 7 Mini

Two-piece construction for full enclosure protection
Quick, secure mounting and fast magnetic attachment
Wireless charging and MagSafe® compatible
MIL-STD 810 drop-tested and IP68 waterproof
Dust/mud resistant with camera lens protection

€62.03 €83.98

-€4.38

SP CONNECT Weather Cover for Xiaomi — Clear

Protects against moisture and dirt; adds shock resistance; preserves touchscreen operability.

€12.40 €16.78

-€4.38

SP CONNECT Weather Cover for Xiaomi — Phone, Clear

Protects Xiaomi devices from moisture and dirt, adds shock resistance, and preserves touchscreen responsiveness.

€12.40 €16.78

Replacement Cylinder for Evolution Motors — 3.500" bore, 1340 cc, Black

-€85.68

DRAG SPECIALTIES Replacement Cylinder for Evolution Motors — 3.500" bore, 1340...

Direct-fit replacement cylinders with ductile cast-iron sleeves in aluminum castings; finish-honed for precise piston fit.

€242.15 €327.83

-€4.38

SP CONNECT Screen Protector — iPhone® 15 Plus, iPhone® 15 Pro Max, Clear

Tempered glass screen protector, 0.5 mm thick. Scratch-, heat- and stain-resistant. Compatible with SP Connect™ phone cases.

€12.40 €16.78

Adhesive Mount PRO — Magnetic, adhesive, black

-€8.77

SP CONNECT Adhesive Mount PRO — Magnetic, adhesive, black

Practical adhesive mount for car, scooter or boat with flexible ball head and Mag-Align head for clear navigation.

€24.81 €33.58

-€297.53

S&S CYCLE Cylinder Kit — 3.625" bore, 4.250" stroke

Complete cylinder kit with front and rear cylinders, gaskets and fasteners. 3.625" bore cylinders require crankcase machining.

€866.14 €1,163.67

Mag-Align Magnetic Alignment Head — Black, Universal compatibility

-€4.95

SP CONNECT Mag-Align Magnetic Alignment Head — Black, Universal...

Magnetic alignment for fast, precise device mounting; easy upgrade for existing mounts.

€13.99 €18.94

Mag-Align Magnetic Alignment Head — Universal compatibility, Black

-€4.95

SP CONNECT Mag-Align Magnetic Alignment Head — Universal compatibility,...

Mag-Align provides magnetic guidance for fast, precise mounting to the Twist-to-Lock interface.

€13.99 €18.94

Mag-Align Magnetic Alignment Head — Black, flat, universal

-€3.71

SP CONNECT Mag-Align Magnetic Alignment Head — Black, flat, universal

Quick, precise magnetic alignment for fast, reliable mounting.

€10.49 €14.20

-€3.71

SP CONNECT Mag-Align Adapter — SPC+, Phone, Black

Easily move your device between mounts and upgrade your current mount for fast, precise, reliable mounting in tough conditions.

€10.49 €14.20

Big Bore Cylinder Kit — 3.927" bore, 106" displacement, 4.375" stroke, Black

-€257.98

S&S CYCLE Big Bore Cylinder Kit — 3.927" bore, 106" displacement, 4.375"...

Complete Big Bore cylinder kit with cylinders, pistons, rings and gaskets; easy installation and made in the USA. Professional installation recommended.

€1,003.25 €1,261.23

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls