Handlebars & Controls (15)

V-Twin MOTO Handlebar — 80 cm width, 25.4 mm clamp, 82 mm rise, Black Anodized

-€30.08

ODI V-Twin MOTO Handlebar — 80 cm width, 25.4 mm clamp, 82 mm...

Hard-anodized moto handlebar with slotted internal wiring, TBW notches, knurled clutch end and laser-etched ODI graphics.

€85.00 €115.08

1" Handlebar w/ TBW Plugs — 1" clamp, 32" width, 9-1/2" rise, chrome

-€63.79

BILTWELL 1" Handlebar w/ TBW Plugs — 1" clamp, 32" width, 9-1/2" rise,...

Ape-hanger handlebar with TBW-compatible plug-in bar end, mandrel-bent 4130 chromoly construction, and milled slots for internal routing.

€180.30 €244.09

1" Handlebar w/ TBW Plugs — 25.4 mm clamp, 77.5 cm (30-1/2") width, 15 cm rise, Black

-€58.46

BILTWELL 1" Handlebar w/ TBW Plugs — 25.4 mm clamp, 77.5 cm (30-1/2")...

Removable injection-molded plug for TBW compatibility, 4130 chromoly construction, mandrel-bent tubing, milled slots for internal routing, notched right-side end for Harley Throttle-By-Wire control module.

€165.22 €223.68

1" Handlebar w/ TBW Plugs — 25.4 mm clamp (1"), 30-1/2" width, 6" rise

-€63.79

BILTWELL 1" Handlebar w/ TBW Plugs — 25.4 mm clamp (1"), 30-1/2" width,...

Injection-molded bar-end plug removes for TBW compatibility; mandrel-bent tubing, milled slots for internal routing, notched right end accepts TBW module, precision mitered TIG welds.

€180.30 €244.09

1" Handlebar w/ TBW Plugs — 30" width, 1" clamp, 4-1/2" rise, Black

-€42.43

BILTWELL 1" Handlebar w/ TBW Plugs — 30" width, 1" clamp, 4-1/2" rise,...

Durable 4130 chromoly handlebar with TBW-ready bar end plug and clean internal wire routing.

€119.91 €162.34

1" Handlebar w/ TBW Plugs — 27-1/4" width, 1" clamp, 1" diameter, 2" pullback

-€47.77

BILTWELL 1" Handlebar w/ TBW Plugs — 27-1/4" width, 1" clamp, 1"...

TBW-compatible handlebar with reinforced plug, milled routing slots, mandrel-bent tubing, and precision TIG-welded joints.

€135.01 €182.78

1" Handlebar w/ TBW Plugs — 25.4 mm clamp, 78.5 cm width, Black

-€58.46

BILTWELL 1" Handlebar w/ TBW Plugs — 25.4 mm clamp, 78.5 cm width, Black

Moto-style handlebar with removable bar-end plug for TBW compatibility and milled slots for internal wiring.

€165.22 €223.68

1" Handlebar w/ TBW Plugs — 1" clamp, 31" width, 4-1/4" rise, Chrome

-€63.79

BILTWELL 1" Handlebar w/ TBW Plugs — 1" clamp, 31" width, 4-1/4" rise,...

Removable nylon plug provides TBW compatibility; milled slots allow clean internal wiring and precise ergonomics.

€180.30 €244.09

V-Twin MOTO Handlebar — 28.6 mm (1-1/8") diameter, 82 mm rise, 80 cm (31-1/2") width, Silver

-€30.08

ODI V-Twin MOTO Handlebar — 28.6 mm (1-1/8") diameter, 82 mm rise,...

7075-T6 alloy construction for strength and lightness.

Shot-peened, hard anodized finish; slotted and TBW-notched for clean wiring.

Laser-etched graphics and knurled clutch side for improved grip.

€85.00 €115.08

-€34.01

ODI V-Twin MOTO Handlebar — 28.6 mm clamping diameter, 80 cm width

7075-T6 construction, slotted for internal wiring, notched for throttle-by-wire, knurled left side for improved grip.

€96.10 €130.11

V-Twin Tracker Handlebar — 28.6 mm (1-1/8") clamp, 70 mm rise, 76 cm (30") width, Black

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm (1-1/8") clamp, 70 mm rise,...

Lightweight 7075-T6 alloy tracker handlebar, shot-peened and hard anodized black, slotted for internal wiring, notched for throttle-by-wire, knurled left side, laser-etched ODI graphics, made in the U.S.A.

€85.00 €115.08

V-Twin Tracker Handlebar — 28.6 mm clamp, 30" width, 70 mm rise, Silver anodized

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm clamp, 30" width, 70 mm...

High-strength 7075-T6 alloy Tracker handlebar with shot-peened, hard-anodized finish; slotted for internal wiring and notched for TBW.

€85.00 €115.08

V-Twin MOTO Handlebar — 25.4 mm diameter, 82 mm rise, 80 cm width, 54 mm sweep, Silver

-€30.08

ODI V-Twin MOTO Handlebar — 25.4 mm diameter, 82 mm rise, 80 cm...

Precision-crafted V-Twin MOTO Handlebar with hard-anodized finish, internal wiring slots, and knurled grip area.

€85.00 €115.08

V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 70 mm rise, 76 cm (30") width

-€34.93

ODI V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 70 mm rise, 76...

7075-T6 alloy tracker handlebar with shot-peened, hard-anodized finish; slotted for internal wiring, notched for TBW, laser-etched ODI graphics, knurled left side for improved grip; made in the U.S.A.

€98.73 €133.66

V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 30" (76 cm) width, 70 mm rise

-€30.08

ODI V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 30" (76 cm)...

Tracker-style handlebar with internal wiring slots, TBW notches, knurled clutch end, and laser-etched ODI graphics. Made in the U.S.A.

€85.00 €115.08

-€23.51

BILTWELL Utility Mirror Round Short Arm — Short arm, Black

Round short-arm mirror with die-cast aluminum construction, stainless-steel pivot, wide-angle tempered glass, and switchable bezel mounting for left or right installation.

€66.44 €89.95

-€47.77

BILTWELL Utility Mirror Round Short Arm — Black

Die-cast aluminum round mirror with long perch, stainless-steel ball pivot, wide-angle tempered glass; convertible bezel mounting; available in round and teardrop shapes.

€135.01 €182.78

-€52.26

BILTWELL Utility Mirror Round Short Arm — Chrome, Pair

Injection die-cast aluminum bezel and perch for lightness and durability
Long perch for an unobstructed view over the rider's shoulder
Stainless-steel ball pivot and mounting hardware
Large wide-angle tempered glass for road and highway use
Swap hardware for left- or right-hand bar end installation on select styles

€147.69 €199.95

-€36.97

ACCUTRONIX Knurled Notched Custom Grips — 25.4 mm (1"), Chrome

High-quality construction
Machined from 6061-T6 billet aluminum
Made in the USA

€143.70 €180.67

Universal Ball Mount — 31.8 mm (1-1/4") handlebar, black powder-coated

-€4.09

RAM MOUNTS Universal Ball Mount — 31.8 mm (1-1/4") handlebar, black...

Compact universal ball mount that fits mirror post openings; includes 1-inch ball and mounting hardware.

€15.90 €19.99

$Universal Camera and Camcorder Adapter — 1\" Ball, Black$

-€2.88

RAM MOUNTS Universal Camera and Camcorder Adapter — 1\" Ball, Black

Stable round-base adapter with a male 1/4"-20 threaded stud for quick attachment to standard cameras and camcorders.

€11.23 €14.11

-€2.62

RAM MOUNTS Cradle for Phones and GPS — Garmin 60, Black

High-strength reinforced cradle for phones and GPS; includes two nuts and bolts. Contents and ball mount adapter not included.

€10.20 €12.82

-€2.62

RAM MOUNTS Cradle for Phones and GPS — Nuvi 50, Black

High-strength composite cradle for phones and GPS.

Includes two nuts and bolts for attaching to compatible mounts.

Contents and ball mount adapter not included.

€10.20 €12.82

-€15.68

RAM MOUNTS X-Grip® Mount Kit — Universal handlebar mount, black

Secure, adjustable device mount with patented ball-and-socket design and a spring-loaded, rubber-tipped holder. Includes all necessary mounting hardware.

€60.98 €76.66

-€14.63

RAM MOUNTS X-Grip® Mount Kit — U-bolt mount, universal cradle

Secure, adjustable device mount with a patented 1" rubber ball-and-socket system, spring-loaded holder, rubber-coated tips, and included hardware. Made in the USA.

€56.91 €71.54

-€40.58

ACCUTRONIX Brass Knurled Custom Grips — 1" handlebar, Polished brass

Precision knurled grips with a closed-end design for a clean look. Made in the USA. Sold as a pair.

€157.82 €198.40

-€40.58

ACCUTRONIX Brass Knurled Custom Grips — 25.4 mm (1"), Polished

High-quality brass series construction for a premium look and lasting durability. Made in the USA. Ideal for riders who want classic style with reliable performance.

€157.82 €198.40

1-3/4" Slimline Handlebar Risers — Rise 1-3/4", Clamp 1", Polished stainless steel

-€39.91

BILTWELL 1-3/4" Slimline Handlebar Risers — Rise 1-3/4", Clamp 1",...

Slimline risers that provide a low-profile rise with solid clamping and straightforward installation.

€112.80 €152.71

-€40.58

ACCUTRONIX Knurled Grooved Custom Grips — 25.4 mm (1"), Brass, Polished

Knurled grooved custom grips that enhance control with durable, high-quality construction. Made in the USA.

€157.82 €198.40

-€40.58

ACCUTRONIX Knurled Notched Custom Grips — 25.4 mm (1"), Brass

High-quality construction; machined from 6061-T6 billet aluminum; made in the USA.

€157.82 €198.40

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls