Engine

Universal Black Rubber Fuel/Oil Line — 7.62 m (25'), 6.4 mm (1/4")

-€6.40

EMGO Universal Black Rubber Fuel/Oil Line — 7.62 m (25'), 6.4 mm...

Universal black rubber fuel and oil line; reinforced and fuel/oil-resistant. Not for use with fuels over 10% alcohol.

€11.89 €18.29

$Universal Black Rubber Fuel/Oil Line — 7.9 mm (5/16\"), 7.62 m (25\'), Black$

-€7.88

EMGO Universal Black Rubber Fuel/Oil Line — 7.9 mm (5/16\"), 7.62 m...

Universal rubber fuel and oil line; reinforced for fuel and oil resistance. Supplied in long rolls. Not for use with fuels over 10% alcohol.

€14.64 €22.52

Universal Black Rubber Fuel/Oil Line — 9.5 mm (3/8"), 7.62 m (25')

-€9.21

EMGO Universal Black Rubber Fuel/Oil Line — 9.5 mm (3/8"), 7.62 m...

Reinforced rubber hose for fuel and oil transfer. Sold in rolls for easy routing. Not for use with fuel over 10% alcohol.

€17.10 €26.31

$Colored Hose Clamps for Oil Lines — 3/8\" oil lines, 6-pack, Chrome$

-€15.18

NAMZ Colored Hose Clamps for Oil Lines — 3/8\" oil lines, 6-pack,...

Custom-colored hose clamps for oil lines that fit braided copper, stainless-steel and most braided rubber hoses. Ideal for custom builds; made in the USA.

€29.47 €44.65

-€11.51

KLOCK WERKS Oil Cooler Guard — Black

Enhances the center of the oil cooler trim with a stylish guard. Easy to install and built in the USA.

€44.80 €56.31

-€11.51

KLOCK WERKS Oil Cooler Guard — Chrome

Dresses up the oil cooler area with matching vent‑screen material; easy to install. Made in the USA.

€44.80 €56.31

-€11.51

KLOCK WERKS Oil Cooler Guard — Chrome

Finishes the oil cooler area, adds visual pop, easy to install, made in the USA.

€44.80 €56.31

Forceflow Cylinder Head Cooler Kit — Black

-€151.61

JIMS Forceflow Cylinder Head Cooler Kit — Black

Plug-and-play cylinder head cooling kit with a high-powered waterproof fan and automatic temperature switch that engages at 140°F. Not for "Twin Cooled" models.

€589.64 €741.25

-€167.07

JIMS Forceflow Cylinder Head Cooler Kit — Black

High-powered waterproof fan directs air around cylinder heads; includes temperature switch (activates at 140°F), manual override, wiring, hardware, and instructions. Plug-and-play installation with no drilling. Not for "Twin Cooled" models with liquid cooled heads.

€649.68 €816.75

-€213.46

JIMS Forceflow Cylinder Head Cooler Kit — Chrome

Directs air through a side scoop to cool cylinder heads; includes a high-powered waterproof fan, temperature switch (activates at 140°F), manual override, wiring and hardware. Plug-and-play installation with no drilling. Not for "Twin Cooled" models.

€414.38 €627.84

-€8.96

JIMS Forceflow Cylinder Head Cooler Mount — Chrome

Secure, precision-machined mount for head coolers; fits many V-twin applications. 110" motors need optional adapter (sold separately).

€34.85 €43.81

-€10.04

JIMS Pinion Shaft Bushing — 1.0035 in

Quality pinion shaft bushing manufactured in the U.S.A. Precision fit for reliable performance.

€39.03 €49.07

-€10.72

JIMS Pinion Shaft Bushing — 1.0015" diameter

Quality pinion shaft bushings. Made in the U.S.A.

€41.72 €52.44

-€9.46

JIMS Pinion Shaft Bushing — 0.8775" diameter, P/N 25593-57

Precision pinion shaft bushing that improves drivetrain reliability. Made in the U.S.A.

€36.76 €46.22

Motor Sprocket Shaft Spacer — JIMS, P/N 24002-70

-€9.37

JIMS Motor Sprocket Shaft Spacer — JIMS, P/N 24002-70

Precision-machined spacer with a 32-micron burr-free finish for extended seal life. Made in the U.S.A.

€36.44 €45.81

-€11.18

JIMS Wrist Pin Bushing — Standard, Bronze

Precision wrist pin bushings that hold concentricity to less than .0002" with a lead-in edge for easy installation. Made in the U.S.A.

€43.45 €54.63

-€11.18

JIMS Wrist Pin Bushing — Oversize (+0.005"), Pair

High-precision wrist pin bushing machined to tight concentricity tolerances with a lead-in edge for easy installation.

€43.45 €54.63

-€8.53

JIMS Cam Cover Bushing — 1.2015" bronze

Precision-machined cam cover bushing finished in one operation with a .0002" tolerance. Lead-in design makes installation and alignment easier. Made in the U.S.A.

€33.16 €41.69

-€11.18

JIMS Wrist Pin Bushing — Standard, Pair

Precision-machined wrist pin bushings hold concentricity to less than .0002" and feature a lead-in edge for easy installation. Made in the U.S.A.

€43.45 €54.63

-€98.73

JIMS Rocker Arm Shaft Kit — PN 5837

Performance rocker arm shafts and precision hardware machined from low-alloy case-hardened steel; hardware flats held to a .0005” parallel tolerance.

€172.78 €271.51

-€42.27

JIMS Powerglide II Hydraulic Tappets — Standard, 0.842 in

Extensively developed hydraulic tappets featuring a billet body, increased roller width, hand-honed hydraulic cavity, over 30% higher dynamic load capacity, and improved lubrication for longer life. Made in the U.S.A.

€164.39 €206.66

-€40.73

JIMS Hydrosolid Tappets — 0.8420 in, Part No. 1820

Performs as a hydraulic tappet up to 5,500 rpm, then converts to solid for an estimated 3–6 usable hp; prevents hydraulic pump and requires adjustable pushrods. Made in the U.S.A.

€158.41 €199.14

Powerglide™ Steady Roll Tappets — 0.8420" diameter, hydraulic, standard

-€33.39

JIMS Powerglide™ Steady Roll Tappets — 0.8420" diameter, hydraulic,...

Powerglide™ Steady Roll Tappets: billet steel body, hand‑honed hydraulic cavity, bronze Steady Roll bushing for increased load capacity, lubrication and life.

€129.84 €163.23

Powerglide™ Steady Roll Tappets — Oversize (+0.002 in), 0.8440 in diameter, Hydraulic

-€37.86

JIMS Powerglide™ Steady Roll Tappets — Oversize (+0.002 in), 0.8440...

Powerglide™ Steady Roll tappets with a Steady Roll bronze bushing, billet steel body and enhanced lubrication for longer service life.

€91.71 €129.57

-€129.35

JIMS Flow Pro 1 Billet Oil Pump Body — Flow Pro 1, black

CNC-machined pump body with matched feed and return gears increases oil return and reduces drag. Includes body, gears, shaft and plugs; cover and mounting hardware not included.

€503.06 €632.41

-€4.35

EMGO Crankcase Vent Filter — chrome base

One-piece chrome-top vent filter with hose clamp and die-cast mounting base. Accepts 3/8" i.d. hose. Replacement filter 14-20905.

€12.28 €16.63

Crankcase Replacement Filter — 14-20905, Chrome

-€2.89

EMGO Crankcase Replacement Filter — 14-20905, Chrome

Replacement element for crankcase ventilation. For use only with crankcase vent filter.

€5.37 €8.26

-€2.57

EMGO Crankcase Vent Filter — 3/8 in inner diameter

Compact crankcase vent filter for reliable ventilation and easy installation.

€4.78 €7.35

-€24.44

JIMS Rocker Arm Shaft — Part 17611-66B

Durable rocker arm shaft for precise valve-train operation. Made in the U.S.A.

€95.06 €119.50

Roller Rocker Arms — fits cams to 0.700" lift at 1.625 ratio, set of 4, steel

-€228.22

JIMS Roller Rocker Arms — fits cams to 0.700" lift at 1.625 ratio,...

Ultra-light roller rocker arms with 660 bronze bushings and a bearing-grade roller tip. Accepts up to 0.700" lift; Twin Cam boxes may need clearance.

€887.55 €1,115.77

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine