Engine

-€2.48

KIBBLEWHITE Seal Valve — 3/8" stem, 4-pack

OE-style low-friction PTFE intake valve seals with steel-clad, low-profile design that resists high temperatures and controls oil flow.

€7.02 €9.50

Valve Stem Kit Replacement Part — 8 mm diameter, PVR59A 90° metal valve stem, silver

-€3.15

K&L SUPPLY Valve Stem Kit Replacement Part — 8 mm diameter, PVR59A 90°...

Replacement part for valve stem kits. Easy installation; restores seal and helps maintain tire pressure.

€8.91 €12.06

-€88.10

K&L SUPPLY Valve Stem Kit

The Valve Stem Kit provides essential components for tire maintenance, including a variety of metal, rubber, and aluminum valve stems, as well as caps and cores.

€248.98 €337.08

-€1.03

K&L SUPPLY Straight Valve Stem — 10 mm hole (0.39"), aluminum, silver

Provides a secure seal and easy inflation for most tubeless tire rims.

€2.92 €3.95

-€1.07

K&L SUPPLY 90° Bend/Angled Valve Stem — 8 mm (0.32") , Silver

Right-angle valve stem that simplifies tire inflation on dual-disc wheels; fits most tubeless rims.

€3.02 €4.09

-€1.62

K&L SUPPLY 90° Bend/Angled Valve Stem

The 90° Bend/Angled Valve Stem simplifies tire inflation on dual disc wheels and is compatible with most tubeless tire rims.

€4.58 €6.20

-€1.62

K&L SUPPLY 90° Bend/Angled Valve Stem

The 90° Bend/Angled Valve Stem simplifies tire inflation on dual disc wheels and is compatible with most tubeless tire rims.

€4.58 €6.20

-€5.15

K&L SUPPLY Short Valve Stem

Short Valve Stem suitable for tubeless tire rims.

€14.53 €19.68

-€11.16

NAMZ Colored Hose Clamps for Oil Lines — 3/8" oil lines, 6 pack

Custom-colored clamps for braided copper, stainless steel, and rubber oil lines; fits most manufacturers' braided rubber hoses.

€33.49 €44.65

Mega 8 Camshaft — 232° exhaust / 230° intake, 0.472" lift, Model TQ230V3

-€124.12

COMP CAMS Mega 8 Camshaft — 232° exhaust / 230° intake, 0.472" lift,...

Performance camshaft delivering broad torque or top-end power, billet-steel construction, made in the USA.

€255.84 €379.96

-€99.30

COMP CAMS Mega 8 Camshaft — Model 234A, 240°/234° duration, 0.472" lift

High-performance camshaft with Endurance Ramps for broader torque, reduced valve train noise, and increased stability; constructed from billet steel and made in the USA.

€280.66 €379.96

-€110.72

COMP CAMS Mega 8 Camshaft — Bolt-In, Model 238A

High-performance camshaft with Endurance Ramps for broad torque, reduced valve train noise, and billet steel construction.

€228.16 €338.88

-€124.12

COMP CAMS Mega 8 Camshaft — Model 248C, High-Lift

High-performance camshaft series featuring Endurance Ramps, reduced valve-train noise, billet-steel construction, and USA manufacturing.

€255.84 €379.96

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, Pair, Black, Chrome

Reduces hot starts and starter/battery load. 5–7 N closing force. Cool-touch molded knobs. Made in the U.S.A.

€31.00 €41.96

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, pair, Black, Chrome

State-of-the-art compression release valves that reduce hot starts and lower starter and battery loads. Sold as a set and made in the U.S.A.

€31.00 €41.96

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, Black, Chrome, Pair

State-of-the-art design to reduce hot starts and starter/battery loads. Custom molded knobs, sold in pairs, made in the U.S.A.

€31.00 €41.96

-€2.40

KIBBLEWHITE Wrist Pin Bushing — 0.897" O.D. x 0.788" I.D. x 1.065" O.L.

Precision wrist pin bushing made to exact tolerances. Made in the USA. Does not include oil hole(s); holes must be drilled after installation.

€6.76 €9.16

-€7.32

JAMES GASKET Carburetor Insulator Block Kit — JAMES GASKET, 29250-98-A, Kit

Kit includes 3/8" fiber insulator block and gaskets to reduce fuel boiling and vapor lock; made in the U.S.A.

€24.89 €32.21

Wrist Pin Bushing — 1.019" O.D x 0.925" I.D x 1.040" O.L., 660 Bronze

-€5.28

KIBBLEWHITE Wrist Pin Bushing — 1.019" O.D x 0.925" I.D x 1.040" O.L., 660...

Made to exact tolerances and built for long service life. Made in the USA. Does not include oil hole(s); holes must be drilled after installation.

€14.92 €20.20

-€2.65

KIBBLEWHITE Wrist Pin Bushing — 0.897" O.D. x 0.788" I.D. x 0.945" O.L.

Made in the USA. Meets or exceeds OE-style fitment and wearability. Does not include oil hole(s); drill after installation.

€7.50 €10.15

-€24.18

JAMES GASKET Cylinder Head/Base Gasket Kit — 4.000", 0.51 mm, 1.14 mm

Complete kit with matching head and base gaskets plus O-rings where applicable. Made in the USA.

€82.20 €106.38

Replacement Cylinder Head and Compliance Fitting Gaskets — 3.750" bore, 0.91 mm thickness, 5-pack

-€15.41

JAMES GASKET Replacement Cylinder Head and Compliance Fitting Gaskets —...

Made in the USA replacement gasket set that restores proper sealing and reduces leaks. Easy to install with standard tools.

€52.39 €67.80

Air Cleaner to Carburetor Gasket — Backplate, beaded, air cleaner-to-carburetor fit, 5 Pack

-€3.54

JAMES GASKET Air Cleaner to Carburetor Gasket — Backplate, beaded, air...

MicroPore® paper resists fluid migration and seals reliably up to 500°F. Foam-core with nitrile coating and silicone release for easy disassembly. Made in the USA.

€12.03 €15.57

-€10.07

JAMES GASKET Primary Gasket — Primary Cover, Part No. 25352-00-F

Top-quality primary gasket with silicone beading for improved sealing. Meets or exceeds OEM specs. Made in the USA.

€34.25 €44.32

-€8.91

JAMES GASKET Transmission Oil Pan Gasket — 5 Pack

Dependable transmission oil pan gasket engineered for a secure seal and straightforward serviceability.

€30.31 €39.22

Nitrided Valve — Standard size, Head diameter 1.805 in, Length 4.420 in, Stem diameter 0.2760 in

-€9.40

KIBBLEWHITE Nitrided Valve — Standard size, Head diameter 1.805 in, Length...

Stellite-tipped stainless-steel valve nitrided for improved wear resistance, corrosion protection, and reduced friction.

€26.59 €35.99

Nitrided Valve — Oversize, 1.900" head diameter, 0.2760" stem diameter, 4.420" length

-€9.40

KIBBLEWHITE Nitrided Valve — Oversize, 1.900" head diameter, 0.2760" stem...

One-piece stellite-tipped nitrided valve engineered to reduce friction and resist corrosion; compatible with leaded and unleaded fuels. Made in the USA.

€26.59 €35.99

-€11.55

KIBBLEWHITE Nitrided Valve — 1.575" head, 0.2755" stem, 4.520" length

Stellite-tipped nitrided valve offering improved wear resistance, corrosion protection, and enhanced flow. Made in USA.

€32.68 €44.23

Nitrided Valve — Oversize, Head Diameter 1.630", Length 4.520", Stem Diameter 0.2755"

-€7.49

KIBBLEWHITE Nitrided Valve — Oversize, Head Diameter 1.630", Length...

One-piece nitrided valve with stellite tip for improved wear resistance, reduced friction, and compatibility with leaded and unleaded fuels. Made in USA.

€29.08 €36.57

Shouldered C630 Bronze Valve Guide — Oversize (+0.001"), ID 0.3098", Length 2.100"

-€8.80

KIBBLEWHITE Shouldered C630 Bronze Valve Guide — Oversize (+0.001"), ID...

Precision-machined nickel bronze valve guide providing superior wear resistance and heat conductivity. Compatible with unleaded fuel; accepts special seals (sold separately). Made in the USA.

€24.97 €33.77

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine