Engine

Valve Stem Kit Replacement Part — 8 mm diameter, PVR59A 90° metal valve stem, silver

-€3.15

K&L SUPPLY Valve Stem Kit Replacement Part — 8 mm diameter, PVR59A 90°...

Replacement part for valve stem kits. Easy installation; restores seal and helps maintain tire pressure.

€8.91 €12.06

-€88.10

K&L SUPPLY Valve Stem Kit

The Valve Stem Kit provides essential components for tire maintenance, including a variety of metal, rubber, and aluminum valve stems, as well as caps and cores.

€248.98 €337.08

-€1.03

K&L SUPPLY Straight Valve Stem — 10 mm hole (0.39"), aluminum, silver

Provides a secure seal and easy inflation for most tubeless tire rims.

€2.92 €3.95

-€1.07

K&L SUPPLY 90° Bend/Angled Valve Stem — 8 mm (0.32") , Silver

Right-angle valve stem that simplifies tire inflation on dual-disc wheels; fits most tubeless rims.

€3.02 €4.09

-€1.62

K&L SUPPLY 90° Bend/Angled Valve Stem

The 90° Bend/Angled Valve Stem simplifies tire inflation on dual disc wheels and is compatible with most tubeless tire rims.

€4.58 €6.20

-€1.62

K&L SUPPLY 90° Bend/Angled Valve Stem

The 90° Bend/Angled Valve Stem simplifies tire inflation on dual disc wheels and is compatible with most tubeless tire rims.

€4.58 €6.20

-€5.15

K&L SUPPLY Short Valve Stem

Short Valve Stem suitable for tubeless tire rims.

€14.53 €19.68

-€2.51

EASTERN MOTORCYCLE PARTS Cam Shims — 0.015", 10-pack

Essential shims for setting up new cams. Made in the USA.

€7.09 €9.60

-€4.58

EASTERN MOTORCYCLE PARTS Cam Shims — 0.45", 5-pack

Precision cam shims for accurate valve adjustment. Made in the U.S.A.

€12.93 €17.51

-€11.22

EASTERN MOTORCYCLE PARTS Cam Drive Sprocket Spacers — 6-pack, sizes 0.100"–0.150"

Precision spacers for cam drive sprockets. Made in the U.S.A.; check alignment and torque during installation.

€31.73 €42.95

-€13.62

SLYFOX Timing Cover — Gloss

Lightweight carbon-fiber protective plate for engine front components.

€52.86 €66.48

-€13.62

SLYFOX Timing Cover — Matte

Carbon fiber construction for lightweight strength and durable protection.

€52.86 €66.48

-€1.49

EASTERN MOTORCYCLE PARTS Piston Pin Clips — 10-pack, A-22097-99

Direct-fit piston pin clips for many Harley models. Made in the USA and built to OEM-equivalent standards.

€4.22 €5.71

-€5.00

EASTERN MOTORCYCLE PARTS Oil Screens — 5-pack

Precision mesh oil screens that trap debris and protect oil passages. Made in the U.S.A.

€14.11 €19.11

-€11.74

EASTERN MOTORCYCLE PARTS Motor Sprocket Shaft Spacer — A-24008-99

Precision-machined spacer for motor sprocket shafts. Made in the USA.

€33.17 €44.91

-€7.41

EASTERN MOTORCYCLE PARTS Counterbalance Shaft Bearing — Left mount

High-quality replacement bearing for counterbalance shafts. Made in the U.S.A.

€20.97 €28.38

-€6.88

EASTERN MOTORCYCLE PARTS Counterbalance Shaft Bearing — Right mount, A-8991

Precision counterbalance shaft bearing — high-quality replacement; made in the U.S.A.

€19.47 €26.35

-€4.58

EASTERN MOTORCYCLE PARTS Right Side Crankcase Bearing Washers — Right, 5 pack

Precision support discs for motorcycle bearing assemblies. Durable steel construction with corrosion-resistant finish. Made in the U.S.A.

€12.93 €17.51

-€8.08

EASTERN MOTORCYCLE PARTS Dowel Pins — 0.434" x 0.500" L, 10 pack

Replacement dowel pins for precise alignment and secure assembly.

€22.84 €30.92

-€2.53

EASTERN MOTORCYCLE PARTS Push Rod Tube Washers — 10 Pack

Precision-fit components that seal and secure engine tube assemblies. Made in the USA.

€7.15 €9.68

-€4.15

EASTERN MOTORCYCLE PARTS Transmission Lock Tab Washers — 10-pack, A-35050-40

Replace during transmission service to maintain secure lock tab fastening.

€11.74 €15.89

-€7.13

EASTERN MOTORCYCLE PARTS Knucklehead Oil Line — Chrome

Direct-fit replacement oil line for Knucklehead engines that simplifies routing and maintenance.

€20.16 €27.29

Mega 8 Camshaft — 232° exhaust / 230° intake, 0.472" lift, Model TQ230V3

-€124.12

COMP CAMS Mega 8 Camshaft — 232° exhaust / 230° intake, 0.472" lift,...

Performance camshaft delivering broad torque or top-end power, billet-steel construction, made in the USA.

€255.84 €379.96

-€99.30

COMP CAMS Mega 8 Camshaft — Model 234A, 240°/234° duration, 0.472" lift

High-performance camshaft with Endurance Ramps for broader torque, reduced valve train noise, and increased stability; constructed from billet steel and made in the USA.

€280.66 €379.96

-€110.72

COMP CAMS Mega 8 Camshaft — Bolt-In, Model 238A

High-performance camshaft with Endurance Ramps for broad torque, reduced valve train noise, and billet steel construction.

€228.16 €338.88

-€124.12

COMP CAMS Mega 8 Camshaft — Model 248C, High-Lift

High-performance camshaft series featuring Endurance Ramps, reduced valve-train noise, billet-steel construction, and USA manufacturing.

€255.84 €379.96

Left Side Sprocket Shaft Bearing Kit — EASTERN MOTORCYCLE PARTS, A-24004-03

-€30.82

EASTERN MOTORCYCLE PARTS Left Side Sprocket Shaft Bearing Kit — EASTERN MOTORCYCLE...

Left side sprocket shaft bearing kit for maintenance and rebuilds. Bearing and bearing race sold separately.

€87.10 €117.92

-€5.08

EASTERN MOTORCYCLE PARTS Cam Support Plate/Cover Bushing — Cam

OEM bushing for cam support plate and cover. Made in the USA.

€14.34 €19.42

-€7.65

EASTERN MOTORCYCLE PARTS Flywheel Thrust Washers — +0.005"

Meets or exceeds OEM specification.

Replacement-type, made in the USA.

€21.60 €29.25

-€7.57

EASTERN MOTORCYCLE PARTS Connecting Rod Races — Set of 3

Precision races for dependable engine performance. Made in the USA.

€21.40 €28.97

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine