Engine

-€2.48

KIBBLEWHITE Seal Valve — 3/8" stem, 4-pack

OE-style low-friction PTFE intake valve seals with steel-clad, low-profile design that resists high temperatures and controls oil flow.

€7.02 €9.50

-€1.36

101 OCTANE Tire Valve Set 90° — 90° bend, blue

Eye-catching coloured tire valves that replace originals and simplify pressure checks with an angled design.

€5.30 €6.66

-€1.36

101 OCTANE Tire Valve Set 90° — Pair, red

Angled valve set that improves access for pressure checks and gives rims a standout look. Easy replacement of original valves.

€5.30 €6.66

-€1.48

101 OCTANE Tire Valve Set 90° — Silver

Coloured 90° tyre valves that replace original valves for easier pressure checks and added style.

€5.76 €7.24

-€0.55

101 OCTANE Tyre valve tubeless straight short metal — Short, silver

Compact straight valve for tubeless rims on motorcycles, scooters and ATVs. Total length 3.6 cm; visible length 2.8 cm; fits rims from 10 inches.

€2.10 €2.65

Tyre valve Tubeless straight long TR413 — 4.5 cm total, 3.5 cm visible, rims ≥12 in, black

-€0.41

101 OCTANE Tyre valve Tubeless straight long TR413 — 4.5 cm total, 3.5 cm...

Long TR413 tubeless valve for motorcycles, scooters, quads and cars. 4.5 cm total, 3.5 cm visible; recommended for rims ≥12 in.

€1.59 €2.00

-€0.41

101 OCTANE Tyre tubeless valve angled 60° — 16 mm feed-through

60° angled tubeless tyre valve for rims with 16 mm feed-through; ideal for scooters, quads and small-diameter wheels.

€1.59 €2.00

-€0.41

101 OCTANE Tyre valve Tubeless straight short TR412 — 36 mm, black

Short, straight tubeless valve suitable for 10–12" rims with an 11.3 mm valve hole. Total length 36 mm; visible length 26 mm. Durable rubber construction.

€1.59 €2.00

Tyre valve Tubeless straight short TR412 — Short, TR-412, 10 pack, Black

-€1.68

101 OCTANE Tyre valve Tubeless straight short TR412 — Short, TR-412, 10...

Short straight tubeless tyre valve; total length 3.6 cm, visible 2.6 cm; fits 10–12 inch rims with 11.3 mm valve hole.

€6.82 €8.50

-€17.37

KURYAKYN Oil Line Nacelle Cover — Chrome

Dresses the area between the cam cover and transmission and routes stock oil lines through the cover.

€67.56 €84.93

-€10.34

KURYAKYN Rear Cylinder Base Cover — Chrome, Rear

Covers the gap between the transmission top cover and the engine cylinder for a finished look. Installs quickly and easily. Durable polished finish.

€40.20 €50.54

-€18.21

KURYAKYN Cylinder Base Timing Hole Cover — Chrome

Smooths the transition from cylinders to engine cases; easy installation; precision construction for lasting fit and finish.

€70.78 €88.99

-€18.51

KURYAKYN Oil Cooler Cover — Chrome

Direct-fit oil cooler cover that installs like the stock factory cover for a quick bolt-on upgrade.

€71.98 €90.49

-€17.37

KURYAKYN Oil Cooler Cover — Chrome

Bolt-on oil cooler cover installs like the stock factory cover. Durable, lightweight design for a refined appearance.

€67.56 €84.93

-€33.71

KURYAKYN One Piece Inner Primary Cover — Chrome

Precise fit with finished edges. Four mounting points for secure, quiet operation. Not for use with rear suspension lowering kits unless specified.

€131.13 €164.84

Precision® Tappet Block Accent Cover — Black gloss

-€20.27

KURYAKYN Precision® Tappet Block Accent Cover — Black gloss

Clean, simple addition that enhances engine style. Brilliant gloss finish.

€78.83 €99.10

-€17.37

KURYAKYN Coolant Pump Cover — Chrome

Direct OE replacement that hides an unsightly voltage regulator for a clean, factory-style appearance.

€67.56 €84.93

-€17.37

KURYAKYN Coolant Pump Cover — KUR6421, Black

Direct OE replacement; hides the voltage regulator for a clean, factory look. Easy bolt-on installation.

€67.56 €84.93

-€11.37

KURYAKYN Inner Primary Front Cover Extension — Front mount, Chrome

Puts the finishing touch on the primary. Covers the shift pivot area and grease fitting. Easily installed.

€44.24 €55.61

-€10.25

KURYAKYN Rocker Box Bolt Cover — fits rocker box, chrome

Protects exposed bolts; covers extend 5/8” above bolt; simple installation. Ensure adequate clearance before installing.

€39.84 €50.09

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, Pair, Black, Chrome

Reduces hot starts and starter/battery load. 5–7 N closing force. Cool-touch molded knobs. Made in the U.S.A.

€31.00 €41.96

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, pair, Black, Chrome

State-of-the-art compression release valves that reduce hot starts and lower starter and battery loads. Sold as a set and made in the U.S.A.

€31.00 €41.96

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, Black, Chrome, Pair

State-of-the-art design to reduce hot starts and starter/battery loads. Custom molded knobs, sold in pairs, made in the U.S.A.

€31.00 €41.96

-€2.40

KIBBLEWHITE Wrist Pin Bushing — 0.897" O.D., 0.788" I.D., 1.065" O.L.

Made to exact tolerances; does not include oil holes; made in USA.

€6.76 €9.16

Flywheel Puller M19x1.0 for Minarelli AM6 — M19x1.0 thread, fits Minarelli AM6

-€1.41

101 OCTANE Flywheel Puller M19x1.0 for Minarelli AM6 — M19x1.0 thread,...

Compact puller with M19x1.0 thread for Minarelli AM6; ideal for alternator conversion work.

€5.48 €6.89

-€5.28

KIBBLEWHITE Wrist Pin Bushing — 1.019" O.D. x 0.925" I.D. x 1.040" O.L.

Made to exact tolerances for OE-style fit and wear.
Made in the USA.
Does not include oil hole(s); must be drilled after installation.

€14.92 €20.20

-€2.65

KIBBLEWHITE Wrist Pin Bushing — 0.897" O.D. x 0.788" I.D. x 0.945" O.L.

Made in the USA. Meets or exceeds OE-style fitment and wearability. Does not include oil hole(s); drill after installation.

€7.50 €10.15

-€2.98

PROX Main Bearing (Individual) — Main crankshaft

High-quality main bearing manufactured to original equipment manufacturer specifications for reliable performance.

€7.52 €10.50

-€3.02

PROX Main Bearing (Individual) — PROX, 23.6204C3, Main Crankshaft

Individual main bearing manufactured to exact OEM specifications for maximum quality and performance. Produced at leading OEM factories in Japan.

€7.64 €10.66

-€3.47

PROX Main Bearing (Individual) — Main Crankshaft

Manufactured at leading OEM factories, mainly in Japan. Made to exact OEM specifications for reliable fit and performance.

€8.74 €12.21

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine