Engine

Tornado Turbo Performance Kit — 107", 114", 117" M-Eight, Black

-€1,595.33

TRASK Tornado Turbo Performance Kit — 107", 114", 117" M-Eight, Black

Bolt-on kit adds 40–50% more power to stock 107", 114", 117" M-Eight motors. Includes larger injectors, spark plugs, boost gauge with mount, oil lines, custom cam cover and Thundermax tune files. Requires Thundermax ECM (sold separately). Does not fit Twin Cooled models or models with non-removable fairing lowers. For offroad use only.

€6,204.07 €7,799.40

Tornado Turbo Performance Kit — Polished

-€1,595.33

TRASK Tornado Turbo Performance Kit — Polished

Bolt-on power: +40–50% on stock 107", 114" and 117" M‑Eight motors.
Compressor and turbine housing with Garrett internals; plenum with integrated blow-off valve.
Includes injectors, spark plugs, boost gauge with mount, oil feed/drain lines, custom cam cover, tune files, hardware and gaskets.
Requires Thundermax ECM (sold separately). Does not fit Twin Cooled or non-removable fairing lowers. Offroad use only.
Made in the USA.

€6,204.07 €7,799.40

-€11.51

KLOCK WERKS Oil Cooler Guard — Black

Enhances the center of the oil cooler trim with a stylish guard. Easy to install and built in the USA.

€44.80 €56.31

-€11.51

KLOCK WERKS Oil Cooler Guard — Chrome

Dresses up the oil cooler area with matching vent‑screen material; easy to install. Made in the USA.

€44.80 €56.31

-€11.51

KLOCK WERKS Oil Cooler Guard — Chrome

Finishes the oil cooler area, adds visual pop, easy to install, made in the USA.

€44.80 €56.31

Forceflow Cylinder Head Cooler Kit — Black

-€151.61

JIMS Forceflow Cylinder Head Cooler Kit — Black

Plug-and-play cylinder head cooling kit with a high-powered waterproof fan and automatic temperature switch that engages at 140°F. Not for "Twin Cooled" models.

€589.64 €741.25

-€167.07

JIMS Forceflow Cylinder Head Cooler Kit — Black

High-powered waterproof fan directs air around cylinder heads; includes temperature switch (activates at 140°F), manual override, wiring, hardware, and instructions. Plug-and-play installation with no drilling. Not for "Twin Cooled" models with liquid cooled heads.

€649.68 €816.75

-€105.85

TRASK Assault Series Cam Cover — Chrome

Transparent cam cover that matches Assault series air cleaners and allows internal inspection. Made in the USA.

€411.66 €517.51

-€103.28

TRASK Assault Series Cam Cover — Black gloss

Transparent cam cover that matches Assault series air cleaners. Made in the USA.

€401.61 €504.89

-€103.28

TRASK Assault Series Cam Cover — Chrome

Transparent cover for viewing internal engine components. Matches the Assault series air cleaners. Made in the USA.

€401.61 €504.89

-€103.28

TRASK Assault Series Cam Cover — Black Gloss

Transparent cam cover that matches Assault series air cleaners. Made in the USA.

€401.61 €504.89

Assault Series Cam Cover — TM-018R, Raw, Machined

-€183.59

TRASK Assault Series Cam Cover — TM-018R, Raw, Machined

Transparent cover for viewing internal engine components; matches Assault series air cleaners. Made in the USA.

€321.30 €504.89

-€213.46

JIMS Forceflow Cylinder Head Cooler Kit — Chrome

Directs air through a side scoop to cool cylinder heads; includes a high-powered waterproof fan, temperature switch (activates at 140°F), manual override, wiring and hardware. Plug-and-play installation with no drilling. Not for "Twin Cooled" models.

€414.38 €627.84

-€60.02

TRASK Mystfree Kit — Crankcase breather valve, Aluminum

Improves oil drainage to the rocker; reduces oil misting from engine breathers; machined T-6061 billet construction; made in the U.S.A.

€233.41 €293.43

-€8.96

JIMS Forceflow Cylinder Head Cooler Mount — Chrome

Secure, precision-machined mount for head coolers; fits many V-twin applications. 110" motors need optional adapter (sold separately).

€34.85 €43.81

-€10.04

JIMS Pinion Shaft Bushing — 1.0035 in

Quality pinion shaft bushing manufactured in the U.S.A. Precision fit for reliable performance.

€39.03 €49.07

-€10.72

JIMS Pinion Shaft Bushing — 1.0015" diameter

Quality pinion shaft bushings. Made in the U.S.A.

€41.72 €52.44

-€9.46

JIMS Pinion Shaft Bushing — 0.8775" diameter, P/N 25593-57

Precision pinion shaft bushing that improves drivetrain reliability. Made in the U.S.A.

€36.76 €46.22

Motor Sprocket Shaft Spacer — JIMS, P/N 24002-70

-€9.37

JIMS Motor Sprocket Shaft Spacer — JIMS, P/N 24002-70

Precision-machined spacer with a 32-micron burr-free finish for extended seal life. Made in the U.S.A.

€36.44 €45.81

-€11.18

JIMS Wrist Pin Bushing — Standard, Bronze

Precision wrist pin bushings that hold concentricity to less than .0002" with a lead-in edge for easy installation. Made in the U.S.A.

€43.45 €54.63

-€11.18

JIMS Wrist Pin Bushing — Oversize (+0.005"), Pair

High-precision wrist pin bushing machined to tight concentricity tolerances with a lead-in edge for easy installation.

€43.45 €54.63

-€8.53

JIMS Cam Cover Bushing — 1.2015" bronze

Precision-machined cam cover bushing finished in one operation with a .0002" tolerance. Lead-in design makes installation and alignment easier. Made in the U.S.A.

€33.16 €41.69

-€11.18

JIMS Wrist Pin Bushing — Standard, Pair

Precision-machined wrist pin bushings hold concentricity to less than .0002" and feature a lead-in edge for easy installation. Made in the U.S.A.

€43.45 €54.63

-€98.73

JIMS Rocker Arm Shaft Kit — PN 5837

Performance rocker arm shafts and precision hardware machined from low-alloy case-hardened steel; hardware flats held to a .0005” parallel tolerance.

€172.78 €271.51

-€42.27

JIMS Powerglide II Hydraulic Tappets — Standard, 0.842 in

Extensively developed hydraulic tappets featuring a billet body, increased roller width, hand-honed hydraulic cavity, over 30% higher dynamic load capacity, and improved lubrication for longer life. Made in the U.S.A.

€164.39 €206.66

-€40.73

JIMS Hydrosolid Tappets — 0.8420 in, Part No. 1820

Performs as a hydraulic tappet up to 5,500 rpm, then converts to solid for an estimated 3–6 usable hp; prevents hydraulic pump and requires adjustable pushrods. Made in the U.S.A.

€158.41 €199.14

Powerglide™ Steady Roll Tappets — 0.8420" diameter, hydraulic, standard

-€33.39

JIMS Powerglide™ Steady Roll Tappets — 0.8420" diameter, hydraulic,...

Powerglide™ Steady Roll Tappets: billet steel body, hand‑honed hydraulic cavity, bronze Steady Roll bushing for increased load capacity, lubrication and life.

€129.84 €163.23

Powerglide™ Steady Roll Tappets — Oversize (+0.002 in), 0.8440 in diameter, Hydraulic

-€37.86

JIMS Powerglide™ Steady Roll Tappets — Oversize (+0.002 in), 0.8440...

Powerglide™ Steady Roll tappets with a Steady Roll bronze bushing, billet steel body and enhanced lubrication for longer service life.

€91.71 €129.57

-€129.35

JIMS Flow Pro 1 Billet Oil Pump Body — Flow Pro 1, black

CNC-machined pump body with matched feed and return gears increases oil return and reduces drag. Includes body, gears, shaft and plugs; cover and mounting hardware not included.

€503.06 €632.41

Mikuni Air Cleaner Adapter — fits HSR 42/45, S&S E/G and Keihin CV, Silver

-€25.15

TRASK Mikuni Air Cleaner Adapter — fits HSR 42/45, S&S E/G and...

Mounts S&S E/G or Keihin CV style air cleaners to Mikuni HSR 42/45 carburetors. Made in the USA.

€58.68 €83.83

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine