Engine

-€2.48

KIBBLEWHITE Seal Valve — 3/8" stem, 4-pack

OE-style low-friction PTFE intake valve seals with steel-clad, low-profile design that resists high temperatures and controls oil flow.

€7.02 €9.50

-€36.88

GOODRIDGE Hose — 366 cm (12'), stainless steel, chrome, 600-06-4

Replacement hose for reliable fluid routing. Durable construction and straightforward installation.

€31.13 €68.01

-€13.34

GOODRIDGE Fitting — oil line, chrome

Easy-to-assemble, high quality. Meets 96-hour salt spray testing. Ships complete with sealing ferrule.

€32.51 €45.85

-€11.75

GOODRIDGE Hose — Oil line, Chrome

Replacement hose for repair or upgrade.

€45.55 €57.30

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, Pair, Black, Chrome

Reduces hot starts and starter/battery load. 5–7 N closing force. Cool-touch molded knobs. Made in the U.S.A.

€31.00 €41.96

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, pair, Black, Chrome

State-of-the-art compression release valves that reduce hot starts and lower starter and battery loads. Sold as a set and made in the U.S.A.

€31.00 €41.96

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, Black, Chrome, Pair

State-of-the-art design to reduce hot starts and starter/battery loads. Custom molded knobs, sold in pairs, made in the U.S.A.

€31.00 €41.96

-€2.40

KIBBLEWHITE Wrist Pin Bushing — 0.897" O.D. x 0.788" I.D. x 1.065" O.L.

Precision wrist pin bushing made to exact tolerances. Made in the USA. Does not include oil hole(s); holes must be drilled after installation.

€6.76 €9.16

Fork Stem Nut Cap — Fork tube, silver, chrome

-€3.73

COLONY Fork Stem Nut Cap — Fork tube, silver, chrome

Polished nut cap that conceals and protects the stem nut. Made in the U.S.A.

€10.55 €14.28

-€2.50

COLONY Fuel Tank Mounting Grommet Kit — Fuel Tank, Black

Includes 6 rubber grommets and 2 metal sleeves. One kit required per set. Made in the United States.

€9.69 €12.19

-€8.59

COLONY Gas Tank Mounting Hardware Kit — Fuel tank, Chrome

Durable mounting hardware for secure tank attachment. Custom plated components and precision fit, made in the U.S.A.

€33.40 €41.99

-€4.55

COLONY Inner Primary Mounting Kit — Hex style, Silver (raw)

Complete mounting kit with all required hardware for inner primary installation. Made in the USA.

€17.69 €22.24

-€7.32

JAMES GASKET Carburetor Insulator Block Kit — JAMES GASKET, 29250-98-A, Kit

Kit includes 3/8" fiber insulator block and gaskets to reduce fuel boiling and vapor lock; made in the U.S.A.

€24.89 €32.21

-€2.69

COLONY Oil Pump Plug — Chrome finish

Plug and plug kits for various Harley‑Davidson oil systems; includes washers or O‑rings as required. Made in the U.S.A.

€7.59 €10.28

Rear Axle Adjuster Bolts — Chrome, rear fitment, OEM compatible

-€3.95

COLONY Rear Axle Adjuster Bolts — Chrome, rear fitment, OEM compatible

Heat-treated, plated adjuster bolts with included chrome lock nuts. Made in the USA.

€15.39 €19.34

-€1.46

COLONY Fork Slider Drain Screws — Chrome finish, pair

Durable button-head Allen drain screws with copper compression washers for fork sliders.

€4.14 €5.60

-€2.53

COLONY Stem Bolt Kit — Steering, Zinc finish, Silver

Stem bolt with washer; complete hardware kit, made in the U.S.A.

€7.15 €9.68

-€2.73

COLONY Stem Cap — Stem Bolt, Silver

Replacement stem cap for Stem Bolt Kit (Part# 2401-0117). Made in the U.S.A.

€7.73 €10.46

Rotor, Sprocket and Belt Mounting Hardware Kit — 44.4 mm (1-3/4"), Chrome

-€6.22

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 44.4 mm...

Complete mounting kit for rotor, sprocket and belt pulley. Fits most H-D brakes and chain or belt drives; includes all necessary hardware. Made in the U.S.A.

€24.18 €30.40

Rotor, Sprocket and Belt Mounting Hardware Kit — 57.2 mm (2-1/4"), Chrome

-€6.50

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 57.2 mm...

Complete mounting kit for rotors, sprockets and belt drives; includes all required hardware for installation.

€25.26 €31.76

S&S Air Cleaner Cover Mounting Screw Kit — Chrome, button & countersunk heads, SAE, fits air cleaner cover

-€1.57

COLONY S&S Air Cleaner Cover Mounting Screw Kit — Chrome, button &...

Three screws to mount S&S air cleaner covers. Made in the U.S.A.

€4.43 €6.00

Wrist Pin Bushing — 1.019" O.D x 0.925" I.D x 1.040" O.L., 660 Bronze

-€9.01

KIBBLEWHITE Wrist Pin Bushing — 1.019" O.D x 0.925" I.D x 1.040" O.L., 660...

Made to exact tolerances and built for long service life. Made in the USA. Does not include oil hole(s); holes must be drilled after installation.

€11.19 €20.20

-€3.63

COLONY Exhaust Port Kit — Exhaust port, flange nut, silver

Includes four studs and four flanged nuts; made in the United States.

€14.14 €17.77

-€2.65

KIBBLEWHITE Wrist Pin Bushing — 0.897" O.D. x 0.788" I.D. x 0.945" O.L.

Made in the USA. Meets or exceeds OE-style fitment and wearability. Does not include oil hole(s); drill after installation.

€7.50 €10.15

Disc Brake Rotor-To-Hub Kit — 3/8-16, 25.4 mm (1") , Chrome, Silver

-€7.36

GARDNER-WESTCOTT Disc Brake Rotor-To-Hub Kit — 3/8-16, 25.4 mm (1") , Chrome,...

Precision kit for rotors with a 3.25" bolt circle. Single kit for single-disc installations; two kits required for dual-disc setups. Made in the U.S.A.

€28.63 €35.99

-€5.56

GARDNER-WESTCOTT Disc Brake Rotor-To-Hub Kit — 3/8-16 thread, 25.4 mm (1")

Kit for mounting rotors to hubs; sturdy construction and made in the U.S.A.

€21.65 €27.21

Handlebar Lever Switch Housing Master Cylinder Fastener — Handlebar lever mount, master cylinder, switch housing, Silver

-€7.74

GARDNER-WESTCOTT Handlebar Lever Switch Housing Master Cylinder Fastener —...

Secure, precision fastener for motorcycle control assemblies. Made in the U.S.A.

€30.10 €37.84

-€1.60

GARDNER-WESTCOTT Fork Drain Plugs — for 41 mm tubes, chrome

Durable fork drain plugs for fast, clean oil changes. Made in the USA.

€6.24 €7.84

Riser Mounting Bolt Set — 2-3/4 in, hex head, chrome

-€5.19

GARDNER-WESTCOTT Riser Mounting Bolt Set — 2-3/4 in, hex head, chrome

Includes 1/2"-13 x 2-3/4" hex-head bolts with lock and cup washers. Made in the U.S.A.

€20.22 €25.41

Disc Brake Rotor-To-Hub Kit — 5/16-18 thread, 22.2 mm (7/8"), Silver

-€5.96

GARDNER-WESTCOTT Disc Brake Rotor-To-Hub Kit — 5/16-18 thread, 22.2 mm (7/8"),...

Fits rotors with a 3.25" bolt circle. Dual disc applications require two kits. Made in the U.S.A.

€23.17 €29.13

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine