Engine

-€2.48

KIBBLEWHITE Seal Valve — 3/8" stem, 4-pack

OE-style low-friction PTFE intake valve seals with steel-clad, low-profile design that resists high temperatures and controls oil flow.

€7.02 €9.50

-€19.20

DRAG SPECIALTIES Crankcase Vent Line — Chrome

Durable replacement for the OEM rubber crankcase-to-oil tank line; includes fittings for easy installation; made in the USA.

€54.26 €73.46

-€44.73

DRAG SPECIALTIES Stainless Steel Braided Oil Line Kit — 4-line kit, chrome

Complete replacement kit with chrome-plated compression and NPT fittings. Direct OEM-fit replacement; made in the USA.

€126.42 €171.15

High Flow Camplate — High Flow, Gear Drive, Chain Drive, 7075 Billet Aluminum

-€86.08

FEULING OIL PUMP CORP. High Flow Camplate — High Flow, Gear Drive, Chain Drive, 7075...

Improves oil circulation by matching camplate and case portholes, increases oil volume and cooling, includes bearing and retainer hardware. For use only with Feuling® oil pumps.

€334.76 €420.84

Cam Set for Chain Drive — 21 Series grind, chain drive

-€83.75

ANDREWS Cam Set for Chain Drive — 21 Series grind, chain drive

Precision-machined alloy-steel cam set for chain drive applications. Made in the USA. Installer must verify coil bind and valve-to-valve and valve-to-piston clearances.

€325.69 €409.44

-€83.75

ANDREWS Cam Set for Chain Drive — Intake & Exhaust, 26 Series

Computer-designed cam set made from alloy steel billets with heat-treated finish; made in the USA. Installer must verify clearances prior to installation.

€325.69 €409.44

Universal Stainless Steel Braided Oil Line — 8.7 mm (11/32"), 205 mm (8"), 1/8" NPT, Chrome

-€10.80

DRAG SPECIALTIES Universal Stainless Steel Braided Oil Line — 8.7 mm (11/32"),...

Universal braided oil line with compression fittings; measured overall including fittings; made in the USA.

€20.05 €30.85

-€83.75

ANDREWS Cam Set for Chain Drive — 31 Series, Intake & Exhaust

Precision-machined valvetrain kit from alloy steel billets with computer-designed lobe profiles. Made in the USA. Installer must verify clearances.

€325.69 €409.44

-€83.75

ANDREWS Cam Set for Chain Drive — 37 Series, P/N 216337, Pair

Computer-designed alloy steel cam set, heat treated and made in the USA. Installer must verify coil bind and valve clearances.

€325.69 €409.44

Cam Set for Chain Drive — 50 Series, Intake 248° / Exhaust 252°, .510" lift, Pair

-€62.77

ANDREWS Cam Set for Chain Drive — 50 Series, Intake 248° / Exhaust...

Computer-designed cam set made from alloy steel billets with precise heat treatment. Made in the USA. Installer must verify coil bind and valve clearances.

€244.18 €306.95

-€83.75

ANDREWS Cam Set for Chain Drive — 55 Series grind, P/N 216355, Pair

Computer-designed, heat-treated alloy-steel cam set made in the USA. Installer must verify clearances and coil bind before installation.

€325.69 €409.44

Conversion Chain Driven Cam — N Series, Chain Conversion, Pair

-€81.68

ANDREWS Conversion Chain Driven Cam — N Series, Chain Conversion, Pair

Upgrades '99-'06 Twin Cam (except '06 Dyna Glide) to roller-style cam chains and replaces spring adjusters with hydraulic ones. Requires additional parts and clearance checks.

€317.65 €399.33

Conversion Chain Driven Cam — N Series, Chain Conversion

-€62.56

ANDREWS Conversion Chain Driven Cam — N Series, Chain Conversion

Upgrades '99-'06 Twin Cam (except '06 Dyna Glide) to roller-style cam chains and hydraulic adjusters. Required component list included; parts sold separately. Made in USA.

€243.39 €305.95

Conversion Chain Driven Cam — N Series, 26 Series grind, Chain Conversion

-€83.51

ANDREWS Conversion Chain Driven Cam — N Series, 26 Series grind, Chain...

Upgrades '99-'06 Twin Cam engines (except '06 Dyna Glide) to roller-style cam chains and replaces spring-tension adjusters with hydraulic adjusters. Requires '07-'17 cam plate, oil pump, cam sprockets, chains and both hydraulic adjusters (sold separately). Made in the USA.

€324.80 €408.31

-€83.90

ANDREWS Conversion Chain Driven Cam — N Series, Chain conversion

Upgrades '99–'06 Twin Cam (except '06 Dyna Glide) to roller-style cam chains and replaces spring-tension adjusters with hydraulic adjusters. Required additional components are not included. Made in the USA.

€326.31 €410.21

Roller Conversion Cam Sprocket — 34 teeth, for 99–01 & 02–06 Twin Cam engines (requires trigger ring for 99–01), ANDREWS 216015

-€20.40

ANDREWS Roller Conversion Cam Sprocket — 34 teeth, for 99–01 & 02–06...

34-tooth roller conversion cam sprocket for Twin Cam conversion chain-driven cams. Trigger ring required for 1999–2001 engines; 2002–2006 engines compatible with stock rear cam drive sprocket. Made in USA.

€79.34 €99.74

Cams for Gear Drives — 37 Series grind, Intake 236°, Exhaust 240°, Pair

-€71.77

ANDREWS Cams for Gear Drives — 37 Series grind, Intake 236°, Exhaust...

Computer-designed alloy-steel cams with heat treatment; made in USA. Four-gear set required. Installer must verify coil bind and clearances.

€279.18 €350.95

-€11.05

ANDREWS Cam Installation Kit — ANDREWS, 288901

Complete kit with gaskets, bearings and hardware required for installing gear-driven cams. Made in the U.S.A.

€42.99 €54.04

Camshaft/Sprocket Thrust Washer Alignment Kit — 1999–2006 fitment, front 0.100", rear 0.110–0.150"

-€15.08

FEULING OIL PUMP CORP. Camshaft/Sprocket Thrust Washer Alignment Kit — 1999–2006...

Aligns the rear cam sprocket to the crank sprocket for correct chain alignment. Includes front thrust washer 0.100" and rear alignment washers 0.110", 0.120", 0.130", 0.140", 0.150".

€58.80 €73.88

-€25.61

DRAG SPECIALTIES Fuel/Oil Line — 9.5 mm (3/8"), 244 cm (8'), Black

Reinforced smooth-bore fuel and oil line that resists fuel and oil. Made in the USA.

€47.56 €73.17

-€7.96

DRAG SPECIALTIES Fuel/Oil Line — 12.7 mm (1/2"), 61 cm (24")

Reinforced, smooth-bore fuel- and oil-resistant line for reliable service.

€14.79 €22.75

-€3.01

DRAG SPECIALTIES Oil Line Retainer Assembly — 3/8" retainer, black

Secures oil lines from the oil tank to the engine. Replacement recommended when lines are removed. O-rings included.

€8.51 €11.52

-€3.01

DRAG SPECIALTIES Oil Line Retainer Assembly — 1/2" retainer, black

Secures oil lines from the oil tank to the engine. Replacement recommended when lines are removed. O-rings included.

€8.51 €11.52

-€22.65

DRAG SPECIALTIES Cam Cover — Cam, Chrome

Die-cast cam cover accepts OEM-style timing covers and factory gaskets and mounting hardware.

€64.01 €86.66

-€6.82

DRAG SPECIALTIES Lower Fitting Seals — 10 Pack, Black

Seals for lower fittings used on oil feed and return lines; replace worn seals to prevent leaks.

€12.67 €19.49

-€8.46

DRAG SPECIALTIES Lower Fitting Seals — 10 pack, brown

Seals for lower fittings on oil feed and return lines; replace when worn to prevent leaks.

€15.72 €24.18

-€50.69

ANDREWS B2 Grind Cam — Exhaust close 25°

More mid-range and high-end power with a smooth idle. Best for 74/80 inch and small stroker engines. Requires spring spacing and main bearing boss clearance check.

€197.15 €247.84

-€62.97

DRAG SPECIALTIES Rocker Box Kit — I33-0103A, Chrome

Quality construction with exact dimensions for a leakproof fit. Sold each; two required per motor.

€177.97 €240.94

-€6.12

FEULING OIL PUMP CORP. Camplate Pressure Relief Spring — 6-pack

Increases pressure relief valve pop-off psi. Spring alone provides the correct spring rate to control pop-off pressure and oil flow in the bypass port. Made in the United States.

€23.81 €29.93

-€40.89

DRAG SPECIALTIES Cam Cover — Chrome

Die-cast construction with OEM-spec bushings; includes oil seal, mounting hardware and gasket.

€115.53 €156.42

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine