Engine

-€62.36

ANDREWS EZ-Install Pushrods — 4-pack, aluminum

Eliminate the need to disassemble rocker boxes or remove the gas tank for cam changes and routine maintenance. Made in the U.S.A.

€242.55 €304.91

-€59.16

ANDREWS EZ-Install Pushrods — 4 Pack, Chromoly

EZ-install pushrods that eliminate removing rocker boxes or the gas tank during cam changes. Made in the U.S.A.

€230.08 €289.24

-€101.56

ANDREWS N2 Grind Cams — Gear, 4 Pack

Proven N2 cam profile; runs to 6500 rpm with stock hydraulic lifters. Made in the U.S.A.

€394.98 €496.54

-€101.56

ANDREWS N4 Grind Cams — 256° duration, 0.490 in lift

Balanced street-oriented cam profile; revs to 6,500 rpm on stock hydraulic lifters. Made in the U.S.A.; solids not recommended.

€394.98 €496.54

-€50.75

ANDREWS EV23 Cam — EV23 grind, Chain, Intake 220°/Exhaust 228°

Bolt-in EV23 cam for heavier touring and high-geared bikes; works with stock springs and either carbs or EFI. Strong pull from 1500–6000 rpm. Made in the USA. Check coil bind and clearances.

€197.35 €248.10

-€24.63

ANDREWS Cam Chain Drive Sprocket — 288015

Direct replacement cam drive sprocket. Replaces the stock 34-tooth unit; includes shims. Crankshaft sprocket is 17-tooth. Made in the U.S.A.

€95.81 €120.44

-€83.75

ANDREWS Cam Set for Chain Drive — 21 Series, Intake & Exhaust

Computer-designed cam set manufactured from alloy steel billets with heat treatment. Installer must check coil bind and clearances. Made in the USA.

€325.69 €409.44

Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust 266°, Lift 0.490"

-€83.75

ANDREWS Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust...

Precision-machined cam set manufactured in the USA from alloy steel billets. Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance. Designed for chain drive applications.

€325.69 €409.44

-€83.75

ANDREWS Cam Set for Chain Drive — 37 Series, Intake 236°, Exhaust 240°

Precision-machined cam set for chain-drive applications. Made in the USA. Installer must verify clearances.

€325.69 €409.44

N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Gear

-€102.70

ANDREWS N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

N2 Grind cams for dependable street performance. Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€398.82 €501.52

-€101.56

ANDREWS N4 Grind Cams — 256° duration, 0.490" lift, chain, 4-pack

Performance cam kit for use with stock hydraulic lifters. Made in the U.S.A. Stock base circle sizes retain stock pushrod compatibility.

€394.98 €496.54

J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

-€50.69

ANDREWS J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

Increases mid-range and top-end power for street and drag bikes; bolt-in, works with solid or hydraulic lifters, maintains a smooth idle.

€197.15 €247.84

J Grind Cam — 242° duration, 0.405" lift

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

Increases mid-range and top-end power for street and drag bikes. Works with solid or hydraulic lifters. Bolt-in installation; verify coil bind and clearances. Made in USA.

€197.15 €247.84

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

More mid-range and top-end power for street and drag bikes; bolt-in with no head work; works with solid or hydraulic lifters; made in USA.

€197.15 €247.84

EV3 Cam — EV3 grind, 238° duration, 0.495" lift

-€50.75

ANDREWS EV3 Cam — EV3 grind, 238° duration, 0.495" lift

Bolt-in cam for light bikes that adds noticeable mid-range power; check coil bind and clearances before installation.

€197.35 €248.10

$EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"$

-€50.75

ANDREWS EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"

Bolt-in cam for street/touring with stronger mid and upper power, compatible with stock springs, reduces oil temperature.

€197.35 €248.10

EV27 Cam — 236° intake, 240° exhaust, 0.495" lift

-€50.75

ANDREWS EV27 Cam — 236° intake, 240° exhaust, 0.495" lift

Bolt-in street cam that delivers a broad torque band from 1,500–6,000 rpm. Uses stock springs and works with carbs or fuel injection. Made in the USA.

€197.35 €248.10

PB+ Exhaust Cams — 254° duration, 0.410" lift

-€50.10

ANDREWS PB+ Exhaust Cams — 254° duration, 0.410" lift

PB+ exhaust cams for bolt-in power on stock 1000cc engines. Use with stock P intake cams; no head work required.

€194.84 €244.94

-€5.12

COMETIC Rocker Gasket — 0.25 mm, Viton-coated steel, 5-pack

High-quality rocker gasket engineered for long-term reliability. Made in the USA.

€14.47 €19.59

Extreme Sealing Technology Rocker Box Gasket Kit — C9588, EST, Rocker Box Kit

-€7.83

COMETIC Extreme Sealing Technology Rocker Box Gasket Kit — C9588, EST,...

Complete gasket kit for both rocker boxes. Includes gaskets, seals, O-rings and bolt seals. Made in the USA.

€26.59 €34.42

-€4.73

COMETIC Derby Cover O-Ring — Derby Cover

High-quality, fuel-resistant sealing component made in the U.S.A. for reliable long-term performance.

€13.40 €18.13

-€4.58

COMETIC Cylinder Base O-ring — C9628, Nitrile

Durable o-ring for sealing the cylinder base; designed for easy installation and reliable leak protection.

€12.94 €17.52

-€21.72

COMETIC Rocker Cover Gasket — 0.51 mm, 10-pack

Premium fuel-resistant construction
Stainless steel core with Viton coating
Multiple-pack supply for routine maintenance

€61.45 €83.17

-€1.41

COMETIC Tappet Gasket — 0.79 mm (0.031 in), Front/Rear, 10 Pack

Premium tappet gasket with AFM construction for fuel resistance and long-term reliability. Does not require gasket sealer. Made in USA.

€5.43 €6.84

-€6.79

COMETIC Cylinder Base Gasket — 3.500" bore, 0.51 mm (0.020") thickness

High-quality cylinder base gasket pair for reliable sealing and long-term durability.

€19.18 €25.97

-€6.56

COMETIC Cylinder Base Gasket — 0.51 mm (0.020"), Standard bore

High-quality, fuel-resistant gasket for durable engine sealing. Made in the USA.

€18.57 €25.13

-€7.05

COMETIC Extreme Sealing Technology Rocker Box Gasket Kit

Complete rocker box gasket kit with all gaskets, seals, O-rings and bolt seals. Made in the USA.

€27.39 €34.44

Extreme Sealing Technology Rocker Box Gasket Kit — EST, Rocker Box

-€11.28

COMETIC Extreme Sealing Technology Rocker Box Gasket Kit — EST, Rocker...

Premium rocker box gasket kit with all gaskets, seals and O-rings included. Made in the USA.

€38.28 €49.56

-€11.28

COMETIC Extreme Sealing Technology Rocker Box Gasket Kit — COMETIC C9753

Complete gasket kit for rocker boxes with all seals, O‑rings and bolt seals for dependable, long‑lasting performance.

€38.28 €49.56

V-Twin Top End Gasket Kits — For '91-'03 XL 883, 883 cc, bore 3.000"

-€31.74

COMETIC V-Twin Top End Gasket Kits — For '91-'03 XL 883, 883 cc, bore...

EST top end gasket kit with embossed stainless steel and rubber-covered gaskets; complete set to rebuild the top end; made in USA.

€89.77 €121.51

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine