Engine

High Flow Camplate — High Flow, Gear Drive, Chain Drive, 7075 Billet Aluminum

-€86.08

FEULING OIL PUMP CORP. High Flow Camplate — High Flow, Gear Drive, Chain Drive, 7075...

Improves oil circulation by matching camplate and case portholes, increases oil volume and cooling, includes bearing and retainer hardware. For use only with Feuling® oil pumps.

€334.76 €420.84

Cam Set for Chain Drive — 21 Series grind, chain drive

-€83.75

ANDREWS Cam Set for Chain Drive — 21 Series grind, chain drive

Precision-machined alloy-steel cam set for chain drive applications. Made in the USA. Installer must verify coil bind and valve-to-valve and valve-to-piston clearances.

€325.69 €409.44

-€83.75

ANDREWS Cam Set for Chain Drive — Intake & Exhaust, 26 Series

Computer-designed cam set made from alloy steel billets with heat-treated finish; made in the USA. Installer must verify clearances prior to installation.

€325.69 €409.44

-€83.75

ANDREWS Cam Set for Chain Drive — 31 Series, Intake & Exhaust

Precision-machined valvetrain kit from alloy steel billets with computer-designed lobe profiles. Made in the USA. Installer must verify clearances.

€325.69 €409.44

-€83.75

ANDREWS Cam Set for Chain Drive — 37 Series, P/N 216337, Pair

Computer-designed alloy steel cam set, heat treated and made in the USA. Installer must verify coil bind and valve clearances.

€325.69 €409.44

Cam Set for Chain Drive — 50 Series, Intake 248° / Exhaust 252°, .510" lift, Pair

-€62.77
Out of Stock

ANDREWS Cam Set for Chain Drive — 50 Series, Intake 248° / Exhaust...

Computer-designed cam set made from alloy steel billets with precise heat treatment. Made in the USA. Installer must verify coil bind and valve clearances.

€244.18 €306.95

-€83.75

ANDREWS Cam Set for Chain Drive — 55 Series grind, P/N 216355, Pair

Computer-designed, heat-treated alloy-steel cam set made in the USA. Installer must verify clearances and coil bind before installation.

€325.69 €409.44

Conversion Chain Driven Cam — N Series, Chain Conversion, Pair

-€81.68

ANDREWS Conversion Chain Driven Cam — N Series, Chain Conversion, Pair

Upgrades '99-'06 Twin Cam (except '06 Dyna Glide) to roller-style cam chains and replaces spring adjusters with hydraulic ones. Requires additional parts and clearance checks.

€317.65 €399.33

Conversion Chain Driven Cam — N Series, Chain Conversion

-€62.56

ANDREWS Conversion Chain Driven Cam — N Series, Chain Conversion

Upgrades '99-'06 Twin Cam (except '06 Dyna Glide) to roller-style cam chains and hydraulic adjusters. Required component list included; parts sold separately. Made in USA.

€243.39 €305.95

Conversion Chain Driven Cam — N Series, 26 Series grind, Chain Conversion

-€83.51

ANDREWS Conversion Chain Driven Cam — N Series, 26 Series grind, Chain...

Upgrades '99-'06 Twin Cam engines (except '06 Dyna Glide) to roller-style cam chains and replaces spring-tension adjusters with hydraulic adjusters. Requires '07-'17 cam plate, oil pump, cam sprockets, chains and both hydraulic adjusters (sold separately). Made in the USA.

€324.80 €408.31

-€83.90

ANDREWS Conversion Chain Driven Cam — N Series, Chain conversion

Upgrades '99–'06 Twin Cam (except '06 Dyna Glide) to roller-style cam chains and replaces spring-tension adjusters with hydraulic adjusters. Required additional components are not included. Made in the USA.

€326.31 €410.21

-€29.48

THRASHIN SUPPLY CO. Skid Plate — Raw

Durable skid plate for protection against road debris, easy installation, and made in the USA.

€83.41 €112.89

Roller Conversion Cam Sprocket — 34 teeth, for 99–01 & 02–06 Twin Cam engines (requires trigger ring for 99–01), ANDREWS 216015

-€20.40

ANDREWS Roller Conversion Cam Sprocket — 34 teeth, for 99–01 & 02–06...

34-tooth roller conversion cam sprocket for Twin Cam conversion chain-driven cams. Trigger ring required for 1999–2001 engines; 2002–2006 engines compatible with stock rear cam drive sprocket. Made in USA.

€79.34 €99.74

-€41.28

THRASHIN SUPPLY CO. Skid Plate — Black

Shields exposed water lines and wiring from road scrapes and debris. 0.125" thick 5052 aluminum construction. Includes mounting hardware; easy installation.

€116.78 €158.06

Cams for Gear Drives — 37 Series grind, Intake 236°, Exhaust 240°, Pair

-€71.77

ANDREWS Cams for Gear Drives — 37 Series grind, Intake 236°, Exhaust...

Computer-designed alloy-steel cams with heat treatment; made in USA. Four-gear set required. Installer must verify coil bind and clearances.

€279.18 €350.95

-€11.05

ANDREWS Cam Installation Kit — ANDREWS, 288901

Complete kit with gaskets, bearings and hardware required for installing gear-driven cams. Made in the U.S.A.

€42.99 €54.04

Camshaft/Sprocket Thrust Washer Alignment Kit — 1999–2006 fitment, front 0.100", rear 0.110–0.150"

-€15.08

FEULING OIL PUMP CORP. Camshaft/Sprocket Thrust Washer Alignment Kit — 1999–2006...

Aligns the rear cam sprocket to the crank sprocket for correct chain alignment. Includes front thrust washer 0.100" and rear alignment washers 0.110", 0.120", 0.130", 0.140", 0.150".

€58.80 €73.88

-€50.69

ANDREWS B2 Grind Cam — Exhaust close 25°

More mid-range and high-end power with a smooth idle. Best for 74/80 inch and small stroker engines. Requires spring spacing and main bearing boss clearance check.

€197.15 €247.84

-€6.12

FEULING OIL PUMP CORP. Camplate Pressure Relief Spring — 6-pack

Increases pressure relief valve pop-off pressure, controls bypass oil flow; spring-only solution made in USA.

€23.81 €29.93

Reaper® 525 Cam — 525 Series grind, Intake 0.525" lift, Exhaust 0.535" lift

-€85.50

FEULING OIL PUMP CORP. Reaper® 525 Cam — 525 Series grind, Intake 0.525" lift,...

Bolt-in camshaft upgrade that broadens low- and mid-range torque, improves throttle response and enhances fuel economy.

€332.49 €417.99

$Reaper® Camshaft 574 Series — fits 96\", 103\", 110\" engines$

-€85.50

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — fits 96\", 103\", 110\" engines

Broad midrange power band camshaft with a smooth lobe design. Made in the USA. Performance pushrods, lifters and clutch recommended.

€332.49 €417.99

-€85.50

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — Exhaust 255°, Intake 240°

Broad power band for modified and stock 96\", 103\" and 110\" engines.

Smooth cam-lobe design for quiet valvetrain operation.

Made in the USA; performance pushrods, lifters and clutch recommended.

€332.49 €417.99

-€32.67

FEULING OIL PUMP CORP. Camshaft Installation Kit — 2060

Complete camshaft installation kit with gaskets, bearings, fasteners, and O-rings.
Includes quick change gasket kit and hardened washers.
Precision bearings and ARP® hardware for secure assembly.
Made in the USA.

€127.03 €159.70

Camshaft Installation Kit — Model Standard, Vendor Part Number 2070

-€22.50

FEULING OIL PUMP CORP. Camshaft Installation Kit — Model Standard, Vendor Part Number...

Complete kit with roller bearings, ARP® bolts, gaskets and hardware to install bolt-in and high-lift camshafts.

€87.50 €110.00

-€5.78

FEULING OIL PUMP CORP. Pressure Relief Kit — FEULING PARTS 8002

Increases relief valve pop-off psi; kit includes valve plunger, spring and roll pin; spring controls pop-off pressure and oil flow; made in the USA.

€22.45 €28.23

Reaper® 525 Cam — 525 Series, 236° exhaust, 226° intake, 0.535" exhaust lift, 0.525" intake lift

-€85.50

FEULING OIL PUMP CORP. Reaper® 525 Cam — 525 Series, 236° exhaust, 226° intake,...

Bolt-in camshaft that broadens the torque band, improves fuel economy and boosts low- and mid-range power; compatible with factory valve springs, pushrods and lifters.

€332.49 €417.99

-€382.08

FEULING OIL PUMP CORP. HP+® Camchest Kit — Chain drive

Complete camchest overhaul kit that lowers engine and oil temperatures, increases oil pressure and improves smoothness and reliability. Includes high-volume oil pump, Reaper® camshafts, hydraulic roller lifters, Timken® bearings and ARP® fasteners. Fits '07-'17 Twin Cam and '06 Dyna.

€1,485.86 €1,867.94

-€38.82

FEULING OIL PUMP CORP. Camshaft Installation Plus Kit

Complete camshaft installation kit with gaskets, bearings, ARP® bolts, and service seals. Made in the USA.

€150.98 €189.80

-€33.81

FEULING OIL PUMP CORP. Camshaft Installation Plus Kit — Plus, Camshaft

Complete camshaft and top-end installation kit with quick-change and top-end gasket sets, bearings, ARP® bolts and installation compounds. Made in the USA.

€131.45 €165.26

-€29.41

FEULING OIL PUMP CORP. Camshaft Installation Plus Kit — Camshaft, Kit

Complete camshaft installation kit with gasket sets, roller bearings, Koyo Torrington® needle bearings, 12-point ARP® bolts, moly paste and Loctite®.

€114.38 €143.79

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine