Engine

-€56.72

SW-MOTECH Engine Guard — Black, lower mounting position

Underbody protection with bike-specific fit and easy installation; mounting material and instructions included.

€220.59 €277.31

Temp Stem Tire Valves for ATVs/UTVs — 11.5 mm (0.453") rim hole, gold

-€8.09

MOOSE OFFROAD FOUR WHEEL Temp Stem Tire Valves for ATVs/UTVs — 11.5 mm (0.453") rim...

Quick 60 second install for a permanent trail-side fix. Rubber grommet expands to lock the stem; compatible with most tubeless rims. For offroad use only.

€22.86 €30.95

-€1.17

MOOSE OFFROAD FOUR WHEEL TR412 Valve Stem — 4 Pack

General replacement for inner tube valves. Simple installation and reliable sealing.

€2.78 €3.95

-€1.46

MOOSE OFFROAD FOUR WHEEL TR412 Valve Stem — 4 Pack, Push-In

Durable replacement for inner tube air ports with tool-free installation.

€3.49 €4.95

Forceflow Cylinder Head Cooler Kit — Black

-€151.61

JIMS Forceflow Cylinder Head Cooler Kit — Black

Plug-and-play cylinder head cooling kit with a high-powered waterproof fan and automatic temperature switch that engages at 140°F. Not for "Twin Cooled" models.

€589.64 €741.25

-€3.90

MOOSE OFFROAD HARD-PARTS Hose Protector — 38 mm inside diameter, 254 mm length

Shields exposed hoses from abrasion and heat; durable spring steel construction and made in the USA.

€11.05 €14.95

Hose Protector — 25 mm inside diameter, 254 mm length (10"), Silver

-€3.64

MOOSE OFFROAD HARD-PARTS Hose Protector — 25 mm inside diameter, 254 mm length (10"),...

Protects hoses from abrasion and heat. Durable spring construction. Made in the USA.

€10.31 €13.95

-€3.64

MOOSE OFFROAD HARD-PARTS Hose Protector — 11.00 mm ID, 254 mm length, Silver

Protects hoses from abrasion and heat.

Made in the USA.

€10.31 €13.95

Hose Protector — 6.4 mm fuel line (1/4 in), 254 mm (10 in), silver

-€3.38

MOOSE OFFROAD HARD-PARTS Hose Protector — 6.4 mm fuel line (1/4 in), 254 mm (10 in),...

Durable hose protector that shields hoses from abrasion and heat. Made from stainless spring steel. Made in the USA.

€9.57 €12.95

-€6.72

ALLOY ART Compression Release Adapter — 14 mm (3/4"), Straight

Designed for twin plug heads. Accepts .650"/10mm x 1.0 compression release valves. Sold each.

€18.99 €25.71

-€6.72

ALLOY ART Compression Release Adapter — 12 mm (3/4")

Designed for twin plug heads. Accepts .650"/10 mm x 1.0 compression release valves. Sold each. Made in the U.S.A.

€18.99 €25.71

-€8.96

JIMS Forceflow Cylinder Head Cooler Mount — Chrome

Secure, precision-machined mount for head coolers; fits many V-twin applications. 110" motors need optional adapter (sold separately).

€34.85 €43.81

-€10.04

JIMS Pinion Shaft Bushing — 1.0035 in

Quality pinion shaft bushing manufactured in the U.S.A. Precision fit for reliable performance.

€39.03 €49.07

-€10.72

JIMS Pinion Shaft Bushing — 1.0015" diameter

Quality pinion shaft bushings. Made in the U.S.A.

€41.72 €52.44

-€9.46

JIMS Pinion Shaft Bushing — 0.8775" diameter, P/N 25593-57

Precision pinion shaft bushing that improves drivetrain reliability. Made in the U.S.A.

€36.76 €46.22

Motor Sprocket Shaft Spacer — JIMS, P/N 24002-70

-€9.37

JIMS Motor Sprocket Shaft Spacer — JIMS, P/N 24002-70

Precision-machined spacer with a 32-micron burr-free finish for extended seal life. Made in the U.S.A.

€36.44 €45.81

-€11.18

JIMS Wrist Pin Bushing — Standard, Bronze

Precision wrist pin bushings that hold concentricity to less than .0002" with a lead-in edge for easy installation. Made in the U.S.A.

€43.45 €54.63

-€11.18

JIMS Wrist Pin Bushing — Oversize (+0.005"), Pair

High-precision wrist pin bushing machined to tight concentricity tolerances with a lead-in edge for easy installation.

€43.45 €54.63

-€8.53

JIMS Cam Cover Bushing — 1.2015" bronze

Precision-machined cam cover bushing finished in one operation with a .0002" tolerance. Lead-in design makes installation and alignment easier. Made in the U.S.A.

€33.16 €41.69

-€11.18

JIMS Wrist Pin Bushing — Standard, Pair

Precision-machined wrist pin bushings hold concentricity to less than .0002" and feature a lead-in edge for easy installation. Made in the U.S.A.

€43.45 €54.63

-€5.05

CYCLE PERFORMANCE PROD. Spark Plug Indexing Washer — 5×0.40 in, 5×0.50 in, 5×0.60 in

Set of 15 indexing washers (5×0.40 in, 5×0.50 in, 5×0.60 in) to align spark plug electrodes toward the intake valve.

€14.68 €19.73

-€55.53

JIMS Rocker Arm Shaft Kit — PN 5837

Performance rocker arm shafts and precision hardware machined from low-alloy case-hardened steel; hardware flats held to a .0005” parallel tolerance.

€215.98 €271.51

-€42.27

JIMS Powerglide II Hydraulic Tappets — Standard, 0.842 in

Extensively developed hydraulic tappets featuring a billet body, increased roller width, hand-honed hydraulic cavity, over 30% higher dynamic load capacity, and improved lubrication for longer life. Made in the U.S.A.

€164.39 €206.66

-€40.73

JIMS Hydrosolid Tappets — Diameter 0.8420"

Performs as a hydraulic tappet to 5,500 rpm, then becomes a solid tappet for increased horsepower; requires adjustable pushrods. Made in the U.S.A.

€158.41 €199.14

Powerglide™ Steady Roll Tappets — 0.8420" diameter, hydraulic, standard

-€33.39

JIMS Powerglide™ Steady Roll Tappets — 0.8420" diameter, hydraulic,...

Powerglide™ Steady Roll Tappets: billet steel body, hand‑honed hydraulic cavity, bronze Steady Roll bushing for increased load capacity, lubrication and life.

€129.84 €163.23

Powerglide™ Steady Roll Tappets — Oversize (+0.002 in), 0.8440 in diameter, Hydraulic

-€37.86

JIMS Powerglide™ Steady Roll Tappets — Oversize (+0.002 in), 0.8440...

Powerglide™ Steady Roll tappets with a Steady Roll bronze bushing, billet steel body and enhanced lubrication for longer service life.

€91.71 €129.57

-€129.35

JIMS Flow Pro 1 Billet Oil Pump Body — Flow Pro 1, black

CNC-machined pump body with matched feed and return gears increases oil return and reduces drag. Includes body, gears, shaft and plugs; cover and mounting hardware not included.

€503.06 €632.41

Gooden-Tite ISO Front Engine Mount — Front, Aluminum, GTMM-1

-€32.94

ALLOY ART Gooden-Tite ISO Front Engine Mount — Front, Aluminum, GTMM-1

CNC-machined base plate with cast high-performance polyurethane isolator bushings. Made in the U.S.A.

€93.08 €126.02

-€36.53

ALLOY ART Gooden-Tite ISO Front Engine Mount — Black

CNC-machined base plate with high-performance polyurethane isolator bushings. Made in the U.S.A.

€103.25 €139.78

Competition Adjustable Front Stabilizer Link — Front, Aluminum, Raw or Machined

-€41.06

ALLOY ART Competition Adjustable Front Stabilizer Link — Front,...

Adjustable front stabilizer link for HD Touring frames with reverse-thread rod end and ARP stainless bolts; available in black anodized, gold anodized, or machined finish. Made in the USA.

€116.05 €157.11

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine