Engine

Tornado Turbo Performance Kit — 107", 114", 117" M-Eight, Black

-€1,595.33

TRASK Tornado Turbo Performance Kit — 107", 114", 117" M-Eight, Black

Bolt-on kit adds 40–50% more power to stock 107", 114", 117" M-Eight motors. Includes larger injectors, spark plugs, boost gauge with mount, oil lines, custom cam cover and Thundermax tune files. Requires Thundermax ECM (sold separately). Does not fit Twin Cooled models or models with non-removable fairing lowers. For offroad use only.

€6,204.07 €7,799.40

Tornado Turbo Performance Kit — Polished

-€1,595.33

TRASK Tornado Turbo Performance Kit — Polished

Bolt-on power: +40–50% on stock 107", 114" and 117" M‑Eight motors.
Compressor and turbine housing with Garrett internals; plenum with integrated blow-off valve.
Includes injectors, spark plugs, boost gauge with mount, oil feed/drain lines, custom cam cover, tune files, hardware and gaskets.
Requires Thundermax ECM (sold separately). Does not fit Twin Cooled or non-removable fairing lowers. Offroad use only.
Made in the USA.

€6,204.07 €7,799.40

Replacement Piston — 3.760" diameter, +0.010" oversize, 4-3/8" stroke, kit

-€23.55

DRAG SPECIALTIES Replacement Piston — 3.760" diameter, +0.010" oversize, 4-3/8"...

OEM-quality cast aluminum piston kit. Includes two pistons, wrist pins and clips. Accepts OEM or Hastings rings (rings sold separately).

€66.56 €90.11

-€26.33

DRAG SPECIALTIES Replacement Piston — 3.875" diameter, 4-3/8" stroke, kit

OEM-quality piston kit includes two pistons, wrist pins and clips. Economical replacement with proven performance.

€74.41 €100.74

-€26.33

DRAG SPECIALTIES Replacement Piston — 3.875" diameter, 4-3/8" stroke, +0.005"

OEM-quality cast aluminum alloy pistons; kits include two pistons, wrist pins and clips. Accepts OEM or Hastings rings (sold separately).

€74.41 €100.74

-€29.38

DRAG SPECIALTIES Piston — 3.750" bore, +0.020" oversize

OEM-quality piston kit for Twin Cam motors. Includes two pistons, wrist pins and clips. Accepts OEM or Hastings rings.

€83.05 €112.43

-€32.37

DRAG SPECIALTIES Big Bore Piston — Bore 3.875" , Compression 10.25:1

Big Bore piston for Twin Cam engines — precision-machined for dependable performance and straightforward installation.

€91.45 €123.82

Big Bore Piston — 3.875" bore, +0.005" oversize, 10.25:1 compression

-€30.22

DRAG SPECIALTIES Big Bore Piston — 3.875" bore, +0.005" oversize, 10.25:1...

Precision big bore piston for Twin Cam engines — ideal for rebuilds and performance builds.

€85.40 €115.62

-€60.02

TRASK Mystfree Kit — Crankcase breather valve, Aluminum

Improves oil drainage to the rocker; reduces oil misting from engine breathers; machined T-6061 billet construction; made in the U.S.A.

€233.41 €293.43

-€121.41

DRAG SPECIALTIES Connecting Rod Set — Heavy Duty, Steel

Reinforced replacements that meet or exceed OEM specs. Pre-assembled set with two-hole crankpin, retainers, bearings and nuts. Verify rod-to-flywheel clearance.

€343.11 €464.52

-€82.49

DRAG SPECIALTIES Connecting Rod Assembly — 24281-74A-BXLB1Z

Durable, OEM-compliant replacement that ships fitted and ready to install; complete kit with crankpin, retainers, bearings and nuts.

€233.13 €315.62

-€84.14

DRAG SPECIALTIES Connecting Rod Assembly — 24281-83-BX-LB1Z

Heavy-duty replacement that meets or exceeds OEM specs. Complete set fitted and ready to install; includes two-hole crankpin, aluminum retainers, bearings, nuts and forged heat-treated rods.

€237.78 €321.92

-€3.43

DRAG SPECIALTIES Rocker Shaft Adjuster Kit — Front, Rear, Exhaust, Intake

Complete set of shims, spacers and seals to rebuild the four rocker shafts in '66–'84 Shovelhead engines; replace with each valve job.

€9.69 €13.12

-€0.77

DRAG SPECIALTIES Rocker Shaft Seals — 4 Pack, 1966–1984 Shovelhead

Complete seal set with shims and spacers to rebuild all four rocker arm shafts on 1966–1984 Shovelhead engines. Replace with each valve job.

€2.18 €2.95

-€4.63

DRAG SPECIALTIES Rocker Arm Shaft — Front, Rear

Rocker arm shaft for Harley-Davidson models — durable construction and precision operation.

€13.09 €17.72

-€28.72

DRAG SPECIALTIES Pushrod Tube Kit — Black, 77334B

Complete kit with upper and lower tubes, clips, cups, springs and washers. O-rings and corks sold separately. One kit fits a complete engine.

€81.16 €109.88

V-Thunder™ Performance Forged Tappet — Black Oxide

-€19.10

COMP CAMS V-Thunder™ Performance Forged Tappet — Black Oxide

Forged performance replacement for stock hydraulic roller lifters. 100% tested and made in the U.S.A.

€54.03 €73.13

V-Thunder™ Race Forged Tappet — Black oxide

-€20.01

COMP CAMS V-Thunder™ Race Forged Tappet — Black oxide

Race/slow bleed upgrade design for high-performance use; each unit 100% tested; durable oxide finish; made in the U.S.A.

€56.63 €76.64

-€99.87

COMP CAMS V-Thunder™ Race Forged Tappet — Set of 4, Black Oxide

Race/slow bleed upgrade design for high-performance use. Each unit is 100% tested for proper function. Made in the United States.

€282.59 €382.46

Replacement Cylinder for Evolution Motors — 3.500" bore, 1340 cc, Black

-€85.68

DRAG SPECIALTIES Replacement Cylinder for Evolution Motors — 3.500" bore, 1340...

Direct-fit replacement cylinders with ductile cast-iron sleeves in aluminum castings; finish-honed for precise piston fit.

€242.15 €327.83

-€36.40

DRAG SPECIALTIES High Performance Oil Pump — High volume, Steel

Improves oil pressure and volume, reduces oil carryover at high rpm, 53mm rotors, die-cast aluminum body with high-strength steel gears. Fits stock and aftermarket cam support plates; not compatible with Screaming Eagle cam plate.

€102.95 €139.35

-€42.89

DRAG SPECIALTIES Oil Pump Assembly — Aluminum finish, Standard flow

High-quality cast aluminum oil pump assembly with steel gears; gaskets and seals included.

€121.22 €164.11

-€15.99

DRAG SPECIALTIES Oil Pump Parts — Gerotor Scavenge, 88721

Assorted replacement components for oil pump service and repair.

€45.19 €61.18

High Volume Oil Pump — air-cooled models only

-€32.48

DRAG SPECIALTIES High Volume Oil Pump — air-cooled models only

Increases feed and scavenge capacity for M8 fourth generation engines; fits air-cooled models only.

€91.77 €124.25

-€13.34

DRAG SPECIALTIES Chrome Tie-Link — Chrome

Precision connector that reduces steering wobble and offers simple bolt-on installation. Supplied individually.

€37.69 €51.03

-€5.27

DRAG SPECIALTIES Swingarm Isolator Mount — Black

Vibration-isolating swingarm mount that meets or exceeds OE specifications for reliable performance and straightforward installation.

€14.90 €20.17

-€5.22

DRAG SPECIALTIES Isolator Mount — Front mounting, Black

Vibration-damping mount engineered to meet or exceed OEM specifications.

€14.76 €19.98

-€5.05

DRAG SPECIALTIES Isolator Mount — Rear, Black

Durable replacement component that reduces vibration and protects hardware. Meets or exceeds OEM specifications.

€14.27 €19.32

-€12.24

DRAG SPECIALTIES Engine Mount Stabilizer — Chrome

Reduces engine movement and vibration; includes mounting hardware.

€34.58 €46.82

-€31.45

DRAG SPECIALTIES Isolator Engine Mount — Front, Black

High-quality replacement motor mount that meets or exceeds OEM specifications; installs using OEM hardware.

€88.86 €120.31

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine