Engine

Tornado Turbo Performance Kit — Black, TRASK

-€1,595.33

TRASK Tornado Turbo Performance Kit — Black, TRASK

Bolt-on turbo kit that adds 40%–50% more power to stock 107", 114" and 117" M-Eight motors; includes injectors, tune files and all install hardware. Requires Thundermax ECM; offroad use only.

€6,204.07 €7,799.40

-€84.67

FEULING OIL PUMP CORP. High Flow Camplate — 7075 billet aluminum, gear drive

The High Flow Camplate increases oil flow and cooling, is pressure tested with a 55-60 psi relief setting, includes bearing and retainer plate hardware, and is for use with Feuling® oil pumps only.

€329.27 €413.94

-€60.02

TRASK Mystfree Kit — Crankcase breather valve, 6061 T6 aluminum

Improves crankcase ventilation; helps oil drain into the rocker and reduces breather misting. Precision-machined billet aluminum; simple bolt-on installation.

€233.41 €293.43

-€18.53

FEULING OIL PUMP CORP. Crankshaft Bearing Race Kit — Twin Cam A Engines

Precision ground press-on races; includes right and left crankshaft races with left side thrust washers. Made in the USA.

€72.06 €90.59

Crankshaft Bearing Race Kit — Twin Cam B engines

-€18.53

FEULING OIL PUMP CORP. Crankshaft Bearing Race Kit — Twin Cam B engines

Precision press-on races for true outer diameter after installation.
Includes right and left crankshaft races and left-side thrust washers.
Made in the USA.

€72.06 €90.59

-€16.34

FEULING OIL PUMP CORP. Undersize Crankshaft Bearing Race Kit — 5206

Press-on undersize crankshaft bearing races for right and left sides, includes left-side thrust washers; enables repair and remachining after race spinning. Made in USA.

€63.57 €79.91

-€2.40

KIBBLEWHITE Wrist Pin Bushing — 0.897" O.D., 0.788" I.D., 1.065" O.L.

Made to exact tolerances; does not include oil holes; made in USA.

€6.76 €9.16

-€5.28

KIBBLEWHITE Wrist Pin Bushing — 1.019" O.D. x 0.925" I.D. x 1.040" O.L.

Made to exact tolerances for OE-style fit and wear.
Made in the USA.
Does not include oil hole(s); must be drilled after installation.

€14.92 €20.20

-€2.65

KIBBLEWHITE Wrist Pin Bushing — 0.897" O.D. x 0.788" I.D. x 0.945" O.L.

Made in the USA. Meets or exceeds OE-style fitment and wearability. Does not include oil hole(s); drill after installation.

€7.50 €10.15

-€11.77

FEULING OIL PUMP CORP. Outer Camshaft Bearing Kit — Camshaft

Single-row deep groove outer bearings built for demanding applications. Kit includes a front ball bearing and a rear roller bearing with race. Made in the USA.

€45.77 €57.54

Inner Camshaft Needle Roller Bearings — Camshaft

-€6.95

FEULING OIL PUMP CORP. Inner Camshaft Needle Roller Bearings — Camshaft

Heavy-duty inner camshaft needle roller bearings for performance engines. Manufactured by Koyo® Torrington® and made in the USA.

€27.05 €34.00

Inner Camshaft Needle Roller Bearings — FEULING PARTS P/N 2077, pair

-€9.29

FEULING OIL PUMP CORP. Inner Camshaft Needle Roller Bearings — FEULING PARTS P/N...

Heavy-duty full-complement needle bearings for camshafts. Manufactured by Koyo Torrington. Made in the USA.

€36.15 €45.44

-€16.94

FEULING OIL PUMP CORP. Outer Camshaft Bearing Kit — Camshaft, Kit

Includes one front ball bearing and one rear roller bearing with race for camshaft applications. Manufactured by Timken® Fafnir® and Koyo® Torrington®. Made in the USA.

€65.86 €82.80

-€181.90

FEULING OIL PUMP CORP. HP+® High Volume Oil Pump — Red

High-volume pump increases oil pressure and flow, reduces temperatures and wet sumping; bench-tested relief valve and proven performance gains on M-Eight.

€707.36 €889.26

-€204.97

FEULING OIL PUMP CORP. Race Series Oil Pump/Camplate Kit — Red

High-performance oil pump and camplate kit that increases oil pressure and flow, reduces temperatures, and corrects common factory scavenge issues for M-Eight engines.

€797.13 €1,002.10

Nitrided Valve — Standard size, Head diameter 1.805 in, Length 4.420 in, Stem diameter 0.2760 in

-€9.40

KIBBLEWHITE Nitrided Valve — Standard size, Head diameter 1.805 in, Length...

Stellite-tipped stainless-steel valve nitrided for improved wear resistance, corrosion protection, and reduced friction.

€26.59 €35.99

Nitrided Valve — Oversize, 1.900" head diameter, 0.2760" stem diameter, 4.420" length

-€9.40

KIBBLEWHITE Nitrided Valve — Oversize, 1.900" head diameter, 0.2760" stem...

One-piece stellite-tipped nitrided valve engineered to reduce friction and resist corrosion; compatible with leaded and unleaded fuels. Made in the USA.

€26.59 €35.99

-€11.55

KIBBLEWHITE Nitrided Valve — 1.575" head, 0.2755" stem, 4.520" length

Stellite-tipped nitrided valve offering improved wear resistance, corrosion protection, and enhanced flow. Made in USA.

€32.68 €44.23

Nitrided Valve — Oversize, Head Diameter 1.630", Length 4.520", Stem Diameter 0.2755"

-€7.49

KIBBLEWHITE Nitrided Valve — Oversize, Head Diameter 1.630", Length...

One-piece nitrided valve with stellite tip for improved wear resistance, reduced friction, and compatibility with leaded and unleaded fuels. Made in USA.

€29.08 €36.57

Shouldered C630 Bronze Valve Guide — Oversize (+0.001"), ID 0.3098", Length 2.100"

-€8.80

KIBBLEWHITE Shouldered C630 Bronze Valve Guide — Oversize (+0.001"), ID...

Precision-machined nickel bronze valve guide providing superior wear resistance and heat conductivity. Compatible with unleaded fuel; accepts special seals (sold separately). Made in the USA.

€24.97 €33.77

Powdered Metal Valve Seats — Inside diameter 1.690", Outside diameter 2.1320", Seat height 0.450"

-€3.89

KIBBLEWHITE Powdered Metal Valve Seats — Inside diameter 1.690", Outside...

High-density powdered metal valve seats for superior wear resistance and thermal stability. Tested for track and street use.

€11.01 €14.90

Powdered Metal Valve Seats — Inside diameter 1.375", Seat height 0.450"

-€2.88

KIBBLEWHITE Powdered Metal Valve Seats — Inside diameter 1.375", Seat...

High-density powdered-metal valve seats engineered for wear resistance and thermal stability; track- and street-tested for multiple fuels and induction types.

€9.81 €12.69

Solid PC Valve Guide Seals — 5/16" stem, 0.517" length, 0.510" outside diameter, PTFE, 4 Pack

-€3.64

KIBBLEWHITE Solid PC Valve Guide Seals — 5/16" stem, 0.517" length, 0.510"...

Kibblewhite Solid PC valve guide seals feature a twin spring design for continuous tension and low-friction performance. Made in the USA.

€10.27 €13.91

Nitrided Valve — 1.840" head, 0.3100" stem, 4.445" length, stainless steel

-€5.91

KIBBLEWHITE Nitrided Valve — 1.840" head, 0.3100" stem, 4.445" length,...

One-piece stellite-tipped nitrided valve for reduced wear, improved flow, and corrosion resistance. Made in the USA.

€21.47 €27.38

Nitrided Valve — 1.565" head, 0.3095" stem, 4.505" length, 17° tulip angle

-€5.93

KIBBLEWHITE Nitrided Valve — 1.565" head, 0.3095" stem, 4.505" length, 17°...

Stellite-tipped nitrided valve for improved wear resistance, reduced friction, and corrosion protection. Made in the USA.

€22.99 €28.92

Nitrided Valve — Oversize, 0.3100" stem, 2.000" head, 4.445" length, Intake

-€14.36

KIBBLEWHITE Nitrided Valve — Oversize, 0.3100" stem, 2.000" head, 4.445"...

One-piece nitrided valve with stellite tip and nitrided surface (.002" depth, .0002" buildup) for superior wear resistance, corrosion protection, and improved flow. Compatible with leaded and unleaded fuels. Made in the USA.

€48.81 €63.17

-€9.07

KIBBLEWHITE C630 Valve Guides — 1.77" length, 0.3375" ID

Precision-machined bronze construction for durability
Tapered nose to reduce port obstruction and improve flow
Compatible with unleaded fuel and a range of valve‑stem materials
Accepts top‑hat valve seals (sold separately)
Made in the USA

€25.65 €34.72

-€2.35

KIBBLEWHITE Shouldered Cast Iron Valve Guide — ID 0.3098 in, Length 2.100 in

Precision-machined, compatible with no-lead fuel and all valve-stem materials; accepts special valve guide seals (sold separately); made in the USA.

€7.03 €9.38

Shouldered Cast Iron Valve Guide — 2.100" length, 0.3098" inside diameter

-€2.68

KIBBLEWHITE Shouldered Cast Iron Valve Guide — 2.100" length, 0.3098"...

Precision-machined valve guide accepts special seals and works with no-lead fuel; made in the U.S.A.

€7.60 €10.28

-€2.68

KIBBLEWHITE Cast Iron Valve Guide — ID 0.3098" , OD 0.5620" , L 2.400"

Precision-machined cast iron valve guide compatible with lead-free fuel; accepts any valve-stem material. Sold each.

€7.60 €10.28

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine