Engine

Replacement Piston — 3.760" diameter, +0.010" oversize, 4-3/8" stroke, kit

-€23.55

DRAG SPECIALTIES Replacement Piston — 3.760" diameter, +0.010" oversize, 4-3/8"...

OEM-quality cast aluminum piston kit. Includes two pistons, wrist pins and clips. Accepts OEM or Hastings rings (rings sold separately).

€66.56 €90.11

-€26.33

DRAG SPECIALTIES Replacement Piston — 3.875" diameter, 4-3/8" stroke, kit

OEM-quality piston kit includes two pistons, wrist pins and clips. Economical replacement with proven performance.

€74.41 €100.74

-€26.33

DRAG SPECIALTIES Replacement Piston — 3.875" diameter, 4-3/8" stroke, +0.005"

OEM-quality cast aluminum alloy pistons; kits include two pistons, wrist pins and clips. Accepts OEM or Hastings rings (sold separately).

€74.41 €100.74

-€29.38

DRAG SPECIALTIES Piston — 3.750" bore, +0.020" oversize

OEM-quality piston kit for Twin Cam motors. Includes two pistons, wrist pins and clips. Accepts OEM or Hastings rings.

€83.05 €112.43

-€32.37

DRAG SPECIALTIES Big Bore Piston — Bore 3.875" , Compression 10.25:1

Big Bore piston for Twin Cam engines — precision-machined for dependable performance and straightforward installation.

€91.45 €123.82

Big Bore Piston — 3.875" bore, +0.005" oversize, 10.25:1 compression

-€30.22

DRAG SPECIALTIES Big Bore Piston — 3.875" bore, +0.005" oversize, 10.25:1...

Precision big bore piston for Twin Cam engines — ideal for rebuilds and performance builds.

€85.40 €115.62

-€121.41

DRAG SPECIALTIES Connecting Rod Set — Heavy Duty, Steel

Reinforced replacements that meet or exceed OEM specs. Pre-assembled set with two-hole crankpin, retainers, bearings and nuts. Verify rod-to-flywheel clearance.

€343.11 €464.52

-€82.49

DRAG SPECIALTIES Connecting Rod Assembly — 24281-74A-BXLB1Z

Durable, OEM-compliant replacement that ships fitted and ready to install; complete kit with crankpin, retainers, bearings and nuts.

€233.13 €315.62

-€84.14

DRAG SPECIALTIES Connecting Rod Assembly — 24281-83-BX-LB1Z

Heavy-duty replacement that meets or exceeds OEM specs. Complete set fitted and ready to install; includes two-hole crankpin, aluminum retainers, bearings, nuts and forged heat-treated rods.

€237.78 €321.92

-€0.77

DRAG SPECIALTIES Rocker Shaft Seals — 4 Pack, 1966–1984 Shovelhead

Complete seal set with shims and spacers to rebuild all four rocker arm shafts on 1966–1984 Shovelhead engines. Replace with each valve job.

€2.18 €2.95

-€4.63

DRAG SPECIALTIES Rocker Arm Shaft — Front, Rear

Rocker arm shaft for Harley-Davidson models — durable construction and precision operation.

€13.09 €17.72

-€28.72

DRAG SPECIALTIES Pushrod Tube Kit — Black, 77334B

Complete kit with upper and lower tubes, clips, cups, springs and washers. O-rings and corks sold separately. One kit fits a complete engine.

€81.16 €109.88

Replacement Cylinder for Evolution Motors — 3.500" bore, 1340 cc, Black

-€85.68

DRAG SPECIALTIES Replacement Cylinder for Evolution Motors — 3.500" bore, 1340...

Direct-fit replacement cylinders with ductile cast-iron sleeves in aluminum castings; finish-honed for precise piston fit.

€242.15 €327.83

$Replacement Cylinder — 3.750\", 88/96 cu in$

-€76.40

DRAG SPECIALTIES Replacement Cylinder — 3.750\", 88/96 cu in

OEM black textured powder-coat with highlighted fins; excellent for stock replacement.

€215.92 €292.32

-€36.40

DRAG SPECIALTIES High Performance Oil Pump — High volume, Steel

Improves oil pressure and volume, reduces oil carryover at high rpm, 53mm rotors, die-cast aluminum body with high-strength steel gears. Fits stock and aftermarket cam support plates; not compatible with Screaming Eagle cam plate.

€102.95 €139.35

-€42.89

DRAG SPECIALTIES Oil Pump Assembly — Aluminum finish, Standard flow

High-quality cast aluminum oil pump assembly with steel gears; gaskets and seals included.

€121.22 €164.11

-€15.99

DRAG SPECIALTIES Oil Pump Parts — Gerotor Scavenge, 88721

Assorted replacement components for oil pump service and repair.

€45.19 €61.18

High Volume Oil Pump — air-cooled models only

-€32.48

DRAG SPECIALTIES High Volume Oil Pump — air-cooled models only

Increases feed and scavenge capacity for M8 fourth generation engines; fits air-cooled models only.

€91.77 €124.25

-€13.34

DRAG SPECIALTIES Chrome Tie-Link — Chrome

Precision connector that reduces steering wobble and offers simple bolt-on installation. Supplied individually.

€37.69 €51.03

-€5.27

DRAG SPECIALTIES Swingarm Isolator Mount — Black

Vibration-isolating swingarm mount that meets or exceeds OE specifications for reliable performance and straightforward installation.

€14.90 €20.17

-€5.22

DRAG SPECIALTIES Isolator Mount — Front mounting, Black

Vibration-damping mount engineered to meet or exceed OEM specifications.

€14.76 €19.98

-€5.05

DRAG SPECIALTIES Isolator Mount — Rear, Black

Durable replacement component that reduces vibration and protects hardware. Meets or exceeds OEM specifications.

€14.27 €19.32

-€12.24

DRAG SPECIALTIES Engine Mount Stabilizer — Chrome

Reduces engine movement and vibration; includes mounting hardware.

€34.58 €46.82

-€31.45

DRAG SPECIALTIES Isolator Engine Mount — Front, Black

High-quality replacement motor mount that meets or exceeds OEM specifications; installs using OEM hardware.

€88.86 €120.31

-€31.45

DRAG SPECIALTIES Isolator Engine Mount — Rear, Black

High-quality replacement isolator that meets or exceeds OEM specifications and installs using OEM hardware.

€88.86 €120.31

-€32.66

DRAG SPECIALTIES Isolator Engine Mount — Rear, Black

High-quality replacement motor mount that meets or exceeds OEM specs and installs with OEM hardware.

€92.32 €124.98

Gooden-Tite ISO Front Engine Mount — Front, Aluminum, GTMM-1

-€32.94

ALLOY ART Gooden-Tite ISO Front Engine Mount — Front, Aluminum, GTMM-1

CNC-machined base plate with cast high-performance polyurethane isolator bushings. Made in the U.S.A.

€93.08 €126.02

-€36.53

ALLOY ART Gooden-Tite ISO Front Engine Mount — Front, black anodized

CNC-machined base plate with high-performance polyurethane isolator bushings. Reduces vibration for a smoother, more controlled ride. Made in the United States.

€103.25 €139.78

-€33.40

DRAG SPECIALTIES Rear Isolator Mount Kit — E28-0021K, Black

Complete kit with all parts to replace rear isolator mounts, including OEM part numbers for direct fitment.

€94.40 €127.80

-€28.30

DRAG SPECIALTIES Rear Isolator Mount Kit — E28-0022K, Black, Rear

Complete kit with all parts to replace rear isolator mounts, including OEM isolators, mount, lock plate, pivot options, and hardware.

€79.98 €108.28

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine