Engine

-€2.48

KIBBLEWHITE Seal Valve — 3/8" stem, 4-pack

OE-style low-friction PTFE intake valve seals with steel-clad, low-profile design that resists high temperatures and controls oil flow.

€7.02 €9.50

-€11.51

KLOCK WERKS Oil Cooler Guard — Black

Enhances the center of the oil cooler trim with a stylish guard. Easy to install and built in the USA.

€44.80 €56.31

-€11.51

KLOCK WERKS Oil Cooler Guard — Chrome

Dresses up the oil cooler area with matching vent‑screen material; easy to install. Made in the USA.

€44.80 €56.31

-€11.51

KLOCK WERKS Oil Cooler Guard — Black

Precision-cut oil cooler guard that adds visual pop to the center of the oil cooler trim. Easy to install and made in the USA.

€44.75 €56.26

-€11.51

KLOCK WERKS Oil Cooler Guard — Chrome

Finishes the oil cooler area, adds visual pop, easy to install, made in the USA.

€44.80 €56.31

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, Pair, Black, Chrome

Reduces hot starts and starter/battery load. 5–7 N closing force. Cool-touch molded knobs. Made in the U.S.A.

€31.00 €41.96

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, pair, Black, Chrome

State-of-the-art compression release valves that reduce hot starts and lower starter and battery loads. Sold as a set and made in the U.S.A.

€31.00 €41.96

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, Black, Chrome, Pair

State-of-the-art design to reduce hot starts and starter/battery loads. Custom molded knobs, sold in pairs, made in the U.S.A.

€31.00 €41.96

-€2.40

KIBBLEWHITE Wrist Pin Bushing — 0.897" O.D. x 0.788" I.D. x 1.065" O.L.

Precision wrist pin bushing made to exact tolerances. Made in the USA. Does not include oil hole(s); holes must be drilled after installation.

€6.76 €9.16

-€3.67

MOTION PRO O-Clips — Double-Ear, 10 Pack, Silver

Strong clamping without hose damage. Easy removal by clipping an ear. Snag-free installation. Made in the USA.

€10.39 €14.06

-€4.25

MOTION PRO O-Clips — Double-Ear, 10-pack, Polished Silver

Strong hose clamps with positive grip, easy ear-clipping removal, and a snag-free design.

€12.01 €16.26

Wrist Pin Bushing — 1.019" O.D x 0.925" I.D x 1.040" O.L., 660 Bronze

-€5.28

KIBBLEWHITE Wrist Pin Bushing — 1.019" O.D x 0.925" I.D x 1.040" O.L., 660...

Made to exact tolerances and built for long service life. Made in the USA. Does not include oil hole(s); holes must be drilled after installation.

€14.92 €20.20

-€2.65

KIBBLEWHITE Wrist Pin Bushing — 0.897" O.D. x 0.788" I.D. x 0.945" O.L.

Made in the USA. Meets or exceeds OE-style fitment and wearability. Does not include oil hole(s); drill after installation.

€7.50 €10.15

Stepless® Ear Clamps for Fuel System — 3/16" ID fuel line, 10 pack

-€4.00

MOTION PRO Stepless® Ear Clamps for Fuel System — 3/16" ID fuel line, 10...

Stepless® ear clamps provide 360° stepless sealing, a narrow 5 mm band for concentrated compression, and tamper-evident construction.

€11.31 €15.31

Stepless® Ear Clamps for Fuel System — 1/4" ID, 5/16" ID, 10 Pack

-€3.98

MOTION PRO Stepless® Ear Clamps for Fuel System — 1/4" ID, 5/16" ID, 10 Pack

360° Stepless® ear clamps with a 5 mm band for concentrated seal compression. Tampering visible; lightweight design. Side jaw clamp pincher tool sold separately.

€11.26 €15.24

Stepless® Ear Clamps for Fuel System — 3/8 in ID, 10 pack, Silver

-€3.96

MOTION PRO Stepless® Ear Clamps for Fuel System — 3/8 in ID, 10 pack, Silver

360° Stepless® ear clamps with narrow 5 mm band, tamper-evident, lightweight, and reduced edge damage risk.

€11.19 €15.15

Nitrided Valve — Standard size, Head diameter 1.805 in, Length 4.420 in, Stem diameter 0.2760 in

-€9.40

KIBBLEWHITE Nitrided Valve — Standard size, Head diameter 1.805 in, Length...

Stellite-tipped stainless-steel valve nitrided for improved wear resistance, corrosion protection, and reduced friction.

€26.59 €35.99

Nitrided Valve — Oversize, 1.900" head diameter, 0.2760" stem diameter, 4.420" length

-€9.40

KIBBLEWHITE Nitrided Valve — Oversize, 1.900" head diameter, 0.2760" stem...

One-piece stellite-tipped nitrided valve engineered to reduce friction and resist corrosion; compatible with leaded and unleaded fuels. Made in the USA.

€26.59 €35.99

-€11.55

KIBBLEWHITE Nitrided Valve — 1.575" head, 0.2755" stem, 4.520" length

Stellite-tipped nitrided valve offering improved wear resistance, corrosion protection, and enhanced flow. Made in USA.

€32.68 €44.23

Nitrided Valve — Oversize, Head Diameter 1.630", Length 4.520", Stem Diameter 0.2755"

-€7.49

KIBBLEWHITE Nitrided Valve — Oversize, Head Diameter 1.630", Length...

One-piece nitrided valve with stellite tip for improved wear resistance, reduced friction, and compatibility with leaded and unleaded fuels. Made in USA.

€29.08 €36.57

Shouldered C630 Bronze Valve Guide — Oversize (+0.001"), ID 0.3098", Length 2.100"

-€8.80

KIBBLEWHITE Shouldered C630 Bronze Valve Guide — Oversize (+0.001"), ID...

Precision-machined nickel bronze valve guide providing superior wear resistance and heat conductivity. Compatible with unleaded fuel; accepts special seals (sold separately). Made in the USA.

€24.97 €33.77

-€3.46

KIBBLEWHITE Cylinder Dowels — 4 Pack, Black oxide, 83080-4

Designed for HD® Evolution OEM replacement. Machined from high‑grade metal with a corrosion‑resistant dark finish. Multipurpose alignment pins. Made in the USA.

€11.74 €15.20

Powdered Metal Valve Seats — Inside diameter 1.690", Outside diameter 2.1320", Seat height 0.450"

-€3.89

KIBBLEWHITE Powdered Metal Valve Seats — Inside diameter 1.690", Outside...

High-density powdered metal valve seats for superior wear resistance and thermal stability. Tested for track and street use.

€11.01 €14.90

Powdered Metal Valve Seats — ID 1.375", OD 1.7570", Seat height 0.450"

-€2.88

KIBBLEWHITE Powdered Metal Valve Seats — ID 1.375", OD 1.7570", Seat...

High-density powdered metal valve seats with exceptional wear resistance, machinability and thermal stability. Tested for street and track use with multiple fuels. Made in the USA.

€9.81 €12.69

Solid PC Valve Guide Seals — Stem diameter 5/16", Length 0.517", OD 0.510", 4 Pack

-€3.64

KIBBLEWHITE Solid PC Valve Guide Seals — Stem diameter 5/16", Length...

PTFE valve guide seals with twin-spring tension for reduced friction and reliable valve control. Made in USA.

€10.27 €13.91

Nitrided Valve — 1.840" head, 0.3100" stem, 4.445" length, stainless steel

-€5.91

KIBBLEWHITE Nitrided Valve — 1.840" head, 0.3100" stem, 4.445" length,...

One-piece stellite-tipped nitrided valve for reduced wear, improved flow, and corrosion resistance. Made in the USA.

€21.47 €27.38

-€5.93

KIBBLEWHITE Nitrided Valve — 1.565" head, 0.3095" stem, 4.505" length

One-piece stellite-tipped nitrided valve with superior wear resistance and reduced friction. Lightweight profiles for excellent flow. Compatible with leaded and unleaded fuels. Made in the USA.

€22.99 €28.92

Nitrided Valve — Oversize, 0.3100" stem, 2.000" head, 4.445" length, Intake

-€14.36

KIBBLEWHITE Nitrided Valve — Oversize, 0.3100" stem, 2.000" head, 4.445"...

One-piece nitrided valve with stellite tip and nitrided surface (.002" depth, .0002" buildup) for superior wear resistance, corrosion protection, and improved flow. Compatible with leaded and unleaded fuels. Made in the USA.

€48.81 €63.17

-€9.07

KIBBLEWHITE C630 Valve Guides — 1.77" length, 0.3375" ID

Precision-machined bronze construction for durability
Tapered nose to reduce port obstruction and improve flow
Compatible with unleaded fuel and a range of valve‑stem materials
Accepts top‑hat valve seals (sold separately)
Made in the USA

€25.65 €34.72

-€2.35

KIBBLEWHITE Shouldered Cast Iron Valve Guide — 0.3098" ID, 2.100" length

Precision-machined shouldered valve guide compatible with no-lead fuel. Accepts special valve guide seals (sold separately). Made in the U.S.A.

€7.03 €9.38

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine