Engine

Tornado Turbo Performance Kit — 107", 114", 117" M-Eight, Black

-€1,595.33

TRASK Tornado Turbo Performance Kit — 107", 114", 117" M-Eight, Black

Bolt-on kit adds 40–50% more power to stock 107", 114", 117" M-Eight motors. Includes larger injectors, spark plugs, boost gauge with mount, oil lines, custom cam cover and Thundermax tune files. Requires Thundermax ECM (sold separately). Does not fit Twin Cooled models or models with non-removable fairing lowers. For offroad use only.

€6,204.07 €7,799.40

Tornado Turbo Performance Kit — Polished

-€1,595.33

TRASK Tornado Turbo Performance Kit — Polished

Bolt-on power: +40–50% on stock 107", 114" and 117" M‑Eight motors.
Compressor and turbine housing with Garrett internals; plenum with integrated blow-off valve.
Includes injectors, spark plugs, boost gauge with mount, oil feed/drain lines, custom cam cover, tune files, hardware and gaskets.
Requires Thundermax ECM (sold separately). Does not fit Twin Cooled or non-removable fairing lowers. Offroad use only.
Made in the USA.

€6,204.07 €7,799.40

-€179.90

JIMS Forceflow Cylinder Head Cooler Kit — Chrome

Plug-and-play cooler kit with a high-powered, waterproof fan and temperature-activated switch; includes wiring, hardware and instructions. Not for "Twin Cooled" models.

€699.64 €879.54

Forceflow Cylinder Head Cooler Kit — Black, not for Twin Cooled models

-€151.61

JIMS Forceflow Cylinder Head Cooler Kit — Black, not for Twin...

Complete plug-and-play cylinder head cooler kit with a waterproof fan, temperature-activated switch (140°F), OEM-type replacement horn, wiring and hardware. Not for "Twin Cooled" models.

€589.64 €741.25

-€179.90

JIMS Forceflow Cylinder Head Cooler Kit — Chrome

Complete plug-and-play kit with high-powered waterproof fan and temperature-controlled operation; installs without drilling. Not for "Twin Cooled" liquid-cooled heads.

€699.64 €879.54

-€105.85

TRASK Assault Series Cam Cover — Raw, Machined

Transparent cam cover designed to match Assault series air cleaners. Made in the USA.

€411.66 €517.51

-€73.75

JIMS Low-Profile Billet Tappet Covers/Pushrod Cover Kit — Black

Low-profile billet tappet and pushrod cover kit; fits Twin Cam pushrod covers only; sits 1/2" lower than stock; includes gaskets, O-rings and screws; made in USA.

€286.83 €360.58

-€136.05

ALLOY ART Comp Cam Cover — Machined

Finned cam cover with a low-profile design for improved header clearance and enhanced crankcase breathing. CNC machined for durability.

€384.47 €520.52

Comp Cam Cover — Black, 6061-T6 billet aluminum, finned

-€148.64

ALLOY ART Comp Cam Cover — Black, 6061-T6 billet aluminum, finned

Low-profile cam cover with large breather fitting, CNC-machined billet aluminum construction, finned for extra cooling; made in the USA.

€420.08 €568.72

$Compression Release Adapter — 14 mm (3/8\"), straight$

-€6.88

ALLOY ART Compression Release Adapter — 14 mm (3/8\"), straight

Designed for twin plug heads. Accepts .650" / 10 mm x 1.0 valves. Sold each. Made in the U.S.A.

€19.47 €26.35

-€55.92
Out of Stock

JIMS Piston Oiling Jet Kit — Silver

High-flow piston oiling jet kit designed for stock and high-performance flywheels; modified for stroker applications. Made in the U.S.A.

€217.44 €273.36

-€13.47
Out of Stock

JIMS Idler Shaft with Bushing — JIMS, 25791-KIT

Includes shaft and bushing. Made in the U.S.A. Kit for idler gear applications.

€52.38 €65.85

Pushrod Gasket and O-Ring Kit — Pushrod, Tappet Cover, JGI-11293-K

-€11.86

JAMES GASKET Pushrod Gasket and O-Ring Kit — Pushrod, Tappet Cover,...

Complete gasket and o-ring kit to seal four pushrod covers; includes gaskets, o-rings, chrome-plated allen bolts and washers. Made in USA.

€33.45 €45.31

Wrist Pin Bushing — 0.899" O.D. x 0.788" I.D. x 1.065" O.L., Oversize (+0.002")

-€2.46

KIBBLEWHITE Wrist Pin Bushing — 0.899" O.D. x 0.788" I.D. x 1.065" O.L.,...

Made to exact tolerances for reliable OE-style fit and wear. Made in the USA. Oil hole(s) not included; must be drilled after installation.

€6.93 €9.39

Wrist Pin Bushing — 0.899" O.D. x 0.788" I.D. x 0.945" O.L., Oversize (+0.002")

-€2.71

KIBBLEWHITE Wrist Pin Bushing — 0.899" O.D. x 0.788" I.D. x 0.945" O.L.,...

Replacement wrist pin bushing made to exact tolerances. Made in the USA. Oil holes not included; drill after installation.

€7.69 €10.40

-€8.79

KIBBLEWHITE Wrist Pin Bushing — 0.897" O.D. x 0.788" I.D. x 1.065" O.L.

Replacement wrist pin bushing made to exact tolerances. Made in USA. Oil holes not included; drill after installation.

€24.86 €33.65

Deflector Plate Gasket/Seal Kit — 60518-65-DLK, Shift Lever & Starter Housing

-€6.50

JAMES GASKET Deflector Plate Gasket/Seal Kit — 60518-65-DLK, Shift Lever &...

Complete gasket and seal kit for the deflector plate that prevents leaks and restores reliable sealing. Made in the USA.

€22.07 €28.57

-€12.53
Out of Stock

JIMS Pinion Shaft Bushing — 1.0035", PN 25582-54/73

Quality pinion shaft bushing. Made in the U.S.A.

€48.70 €61.23

-€14.11

JIMS Circuit Breaker Shaft Kit — JIMS, 25856-KIT

Includes a shaft and two replacement bushings; restores circuit breaker operation. Manufactured in the United States.

€54.90 €69.01

-€39.85

KIBBLEWHITE Racing Valve Spring Kit — 0.600" lift, 347 lb open, 148 lb seat

Progressively wound racing valve springs offering improved fatigue life and consistent high-rpm performance.

€144.74 €184.59

Motor Sprocket Shaft Spacer Kit — 0.366–0.666 in, 8-pack

-€29.50

JIMS Motor Sprocket Shaft Spacer Kit — 0.366–0.666 in, 8-pack

Eight-piece spacer kit machined to a 32-micron, burr-free finish for extended seal life; fits the sprocket shaft oil seal.

€114.73 €144.23

Shouldered C630 Bronze Valve Guide — Inside diameter 0.3098", Length 2.100"

-€8.35

KIBBLEWHITE Shouldered C630 Bronze Valve Guide — Inside diameter 0.3098",...

Precision-machined nickel bronze construction for excellent wear resistance and heat conductivity.

Compatible with no-lead fuel; accepts various valve-stem materials.

Accepts special valve guide seals (sold separately). Made in USA.

€23.64 €31.99

Shouldered C630 Bronze Valve Guide — Oversize (+0.001"), 0.3098" ID, 2.100" L

-€7.05

KIBBLEWHITE Shouldered C630 Bronze Valve Guide — Oversize (+0.001"),...

Precision-machined shouldered valve guide for superior wear resistance and efficient heat dissipation.

€19.98 €27.03

Powdered Metal Valve Seats — 1.535" inside diameter, 1.969" outside diameter, 0.453" seat height

-€3.62

KIBBLEWHITE Powdered Metal Valve Seats — 1.535" inside diameter, 1.969"...

High-density powdered metal valve seats with exceptional wear resistance and thermal properties; track- and street-tested and made in the USA.

€10.23 €13.85

Cam Cover Bushing — 1.0035" diameter, bronze

-€8.74
Out of Stock

JIMS Cam Cover Bushing — 1.0035" diameter, bronze

Precision machined cam cover bushing with .0002" tolerance and installation lead-in. Made in the U.S.A.

€33.99 €42.73

Powdered Metal Valve Seats — Intake, ID 1.562", OD 2.007", Height 0.450"

-€4.11

KIBBLEWHITE Powdered Metal Valve Seats — Intake, ID 1.562", OD 2.007",...

High-density powdered metal valve seats engineered for wear resistance and thermal stability. Track- and street-tested for multi-valve, high-RPM applications. Standard set uses two intake and two exhaust seats.

€11.61 €15.72

$Cam Cover Bushing — 0.9405\" bronze$

-€11.26

JIMS Cam Cover Bushing — 0.9405\" bronze

Precision machined cam cover bushing with lead-in for easy installation. Made in the U.S.A.

€43.78 €55.04

-€9.31

KIBBLEWHITE Nitrided Valve — 1.715" head, 0.3100" stem, 4.480" length

One-piece, stellite-tipped nitrided valve with surface buildup to reduce wear and friction; corrosion-resistant and compatible with leaded and unleaded fuels. Made in the USA.

€26.28 €35.59

Nitrided Valve — Oversize, 1.900" head, 0.3100" stem, 4.420" length

-€6.08

KIBBLEWHITE Nitrided Valve — Oversize, 1.900" head, 0.3100" stem, 4.420"...

Nitrided one-piece stainless-steel valve with stellite tip for superior wear resistance and reduced friction. Made in the USA.

€20.66 €26.74

C630 Valve Guides — 1.770" L, 0.5650" OD, 0.3085" ID

-€9.07

KIBBLEWHITE C630 Valve Guides — 1.770" L, 0.5650" OD, 0.3085" ID

Precision-machined C63000 bronze valve guides with tapered nose for improved flow; OEM-style fitment; top-hat seals sold separately; made in USA.

€25.65 €34.72

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine