Engine

-€52.92

S&S CYCLE 510V Camshaft — Gear

S&S bolt-in 510V camshaft proven on dyno, street and track; ideal for engines up to 96" and up to 10:1 compression. Installer must verify clearances.

€205.82 €258.74

High Flow Camplate — 7075 billet aluminum, Chain drive

-€92.08

FEULING OIL PUMP CORP. High Flow Camplate — 7075 billet aluminum, Chain drive

Precision-machined camplate that increases oil flow and volume, lowers engine and oil temperatures, and is pressure tested to 55-60 psi. Includes bearing and retainer hardware. For use with Feuling® oil pumps.

€358.14 €450.22

-€213.10

S&S CYCLE 570G Camshaft Kit — 570 Series, Gear

Gear-driven camshaft kit for 88–103 CID engines (9:1–10:1). Strongest at 3200–3700 rpm; includes cams, gears, bearings and gasket. Professional installation required.

€828.74 €1,041.84

450S Cam — Intake 236°, Exhaust 238°, Lift 0.475"

-€57.28

S&S CYCLE 450S Cam — Intake 236°, Exhaust 238°, Lift 0.475"

Dyno-tested S&S 450S cam delivering good low and mid-range torque. Bolt-in for lower compression motors up to 8.5:1. Recommend hydraulic lifters. Made in USA.

€222.75 €280.03

Reaper® 525 Cam — 525 Series grind, 236° exhaust duration, 226° intake duration

-€119.78

FEULING OIL PUMP CORP. Reaper® 525 Cam — 525 Series grind, 236° exhaust duration,...

Bolt-in camshaft upgrade for stock 88" and 96" engines; widens the torque band, improves throttle response and fuel economy.

€338.55 €458.33

Reaper® Camshaft 574 Series — Intake 240°, Exhaust 255°, Lift 0.574"

-€141.31
Out of Stock

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — Intake 240°, Exhaust 255°, Lift...

Power band for modified engines; bolt-in for stock 96", 103" and 110" engines. Smooth cam-lobe design for quiet valvetrain. Made in USA. Performance pushrods, lifters and clutch recommended.

€399.38 €540.69

Reaper® 630 Cam — 263° exhaust, 258° intake, 0.630" lift

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 630 Cam — 263° exhaust, 258° intake, 0.630" lift

Wide 2500–6900+ RPM power range
Requires carburetor/throttle body tuning and performance exhaust/intake
High-performance valve springs, pushrods and lifters required
Made in the USA

€366.15 €460.30

Reaper® 630 Cam — 630 Series grind, 263° exhaust duration, 39° overlap

-€94.15

FEULING OIL PUMP CORP. Reaper® 630 Cam — 630 Series grind, 263° exhaust duration, 39°...

High‑performance camshaft that boosts mid and top end power while retaining low‑end performance. Requires carb/throttle body tuning and supporting exhaust and intake systems. Professional installation recommended.

€366.15 €460.30

-€27.33

FEULING OIL PUMP CORP. Camshaft Installation Kit — Camshaft kit, Part 2065

Complete camshaft installation kit with quick change gaskets and premium roller bearings for reliable camplate service.

€106.26 €133.59

-€2.53

FEULING OIL PUMP CORP. Bearing Retainer Plate — Cam, steel

Cam bearing retainer plate and hardware; fits Twin Cam model cam plates. Not for '06 Dyna or Screamin' Eagle support plates.

€9.88 €12.41

-€7.77
Out of Stock

FEULING OIL PUMP CORP. Camplate Chain Tensioner Pins — Pair

Pair of precision pins that ensure correct press fit when servicing Twin Cam chain drive cam plates and tensioners.

€30.23 €38.00

-€136.27

FEULING OIL PUMP CORP. High Flow Camplate — Chain conversion

Increases engine oil flow and cooling; pressure-tested with relief valve set to 55–60 psi. Includes bearing and retainer plate hardware. For use only with Feuling® oil pumps.

€385.05 €521.32

-€121.44

S&S CYCLE 570 Easy Start Camshaft Kit — 570 Series grind, Chain

Temporarily reduces crank compression for easier starts, bolt-in kit that increases power from 3200–5700 rpm; includes camshafts and hardware. Installer must verify clearances. Not for models with OEM compression releases.

€472.27 €593.71

-€112.20

S&S CYCLE 585 Easy Start Camshaft Kit — 88–124 CID, 585 Series grind

Easy-start camshaft kit for select 88–124 CID engines. Bolt-in installation; includes required hardware. Installer must verify clearances.

€436.38 €548.58

-€222.31

S&S CYCLE 551 Easy Start Camshaft Kit — Easy Start, Gear

Easy-start camshaft kit that reduces compression at startup for easier cranking; bolt-in for stock or mildly modified Touring models. Includes camshafts and installation hardware. Not for models with OEM compression releases.

€864.53 €1,086.84

-€240.61

S&S CYCLE 585 Easy Start Camshaft Kit — 585 Series grind, gear type

Eases cold starts by reducing starting compression; bolt-in kit with all required hardware. Not for models with OEM compression releases.

€935.67 €1,176.28

-€94.15

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — Chain, Pair

Bolt-in camshaft delivering a smooth valvetrain and broad power band for modified and stock 96", 103" and 110" engines.

€366.15 €460.30

570C Camshaft Kit — 570 Series grind, Chain, Exhaust 255°, Intake 240°

-€93.94

S&S CYCLE 570C Camshaft Kit — 570 Series grind, Chain, Exhaust 255°,...

Designed for 88"–103" CID engines (9:1–10:1). Delivers strongest power from 3200–3700 rpm. Kit includes camshafts and installation components. Installer must verify clearances; requires high lift valve springs.

€365.33 €459.27

HP+® Camchest Kit — Chain drive, Intake & Exhaust, FEULING PARTS 7201

-€420.76

FEULING OIL PUMP CORP. HP+® Camchest Kit — Chain drive, Intake & Exhaust, FEULING...

Complete camchest kit for '99-'06 Twin Cam (except '06 Dyna). Improves oil pressure, lowers temps, and includes pump, camshafts, lifters and all hardware.

€1,636.28 €2,057.04

-€420.76

FEULING OIL PUMP CORP. HP+® Camchest Kit — Chain Drive, 574 Series

Complete camchest replacement kit for '99-'06 Twin Cam (except '06 Dyna). Restores reliability, increases oil pressure and flow, reduces engine and oil temperatures, and includes all necessary components for installation.

€1,636.28 €2,057.04

-€94.15

FEULING OIL PUMP CORP. Reaper® Camshaft Chain Drive Conversion — 574 Series, Pair

Bolt-in chain conversion for stock 103" and 110" engines; broad power band for modified big-bore engines. Recommended 2000–6800 rpm.

€366.15 €460.30

-€112.20

S&S CYCLE 557 Easy Start Camshaft Kit — 557 Series grind, chain drive

Bolt-in camshaft kit that eases starting by temporarily reducing compression; includes all required seals and hardware. Installer must verify clearances. Not for OEM compression-release models.

€436.38 €548.58

-€23.88

FEULING OIL PUMP CORP. Camshaft Installation Kit — Standard, Chain Conversion, Kit, 2063

Complete camshaft installation kit with roller bearings, Koyo Torrington® needle bearings, 12-point ARP® bolts, gaskets and installation hardware. Quick change and top-end options available. Made in the U.S.A.

€92.88 €116.76

-€29.14

FEULING OIL PUMP CORP. Camshaft Installation Kit — Plus, Chain Conversion

Complete camshaft installation kit with roller bearings, ARP bolts, gasket sets, and quick-change/top-end options. Made in the U.S.A.

€113.32 €142.46

Reaper® 543 Cam — 543 Series grind, fits 88", 96", 103", 1900–6000 RPM

-€87.64

FEULING OIL PUMP CORP. Reaper® 543 Cam — 543 Series grind, fits 88", 96", 103",...

Broad, smooth power from 1900–6000 RPM; bolt-in fit for stock to mid 96" and 103" engines.

€340.80 €428.44

-€87.64

FEULING OIL PUMP CORP. Reaper® 543 Cam — 543 Series, Chain Conversion

Smooth midrange power with strong low-end torque. Bolt-in cam for many 88"–103" engines; performance valve springs required on '99–'04 models.

€340.80 €428.44

Reaper® 594 Cam — 594 Series grind, 260° exhaust / 255° intake, 0.604" lift

-€94.15

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 Series grind, 260° exhaust / 255°...

Fierce-performing camshaft for 103", 110" and 124" engines; boosts torque and horsepower across wide RPM ranges. Made in the USA.

€366.15 €460.30

-€94.15

FEULING OIL PUMP CORP. Reaper® 543 Cam — 543 Series, Exhaust 248°, Intake 238°, Pair

Broad, smooth power band with strong low-end torque.

Bolt-in fit for many 88", 96" and 103" engines.

Improves throttle response and fuel mileage; recommended upgrades for some model years.

€366.15 €460.30

Reaper® 594 Cam — 594 Series grind, Intake 255°, Exhaust 260°, Intake lift 0.594", Exhaust lift 0.604"

-€94.15

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 Series grind, Intake 255°, Exhaust 260°,...

Fierce-performing camshaft for large and small displacements, offering strong torque and horsepower gains; requires complementary performance upgrades. Made in the USA.

€366.15 €460.30

Reaper® 594 Cam — 594 Series, Intake 255°, Exhaust 260°, Lift 0.594"/0.604"

-€94.15

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 Series, Intake 255°, Exhaust 260°, Lift...

Fierce-performing camshaft for large (103", 110", 124") and small 95" displacement engines; requires upgraded valve springs, pushrods, lifters, intake/exhaust and clutch.

€366.15 €460.30

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine