Engine

-€2.48
Out of Stock

KIBBLEWHITE Seal Valve — 3/8" stem, 4-pack

OE-style low-friction PTFE intake valve seals with steel-clad, low-profile design that resists high temperatures and controls oil flow.

€7.02 €9.50

-€20.77
Out of Stock

DRAG SPECIALTIES Stainless Steel Braided Oil Line Kit — 6-Line Kit, Chrome

Direct replacements for OEM oil lines. Compression and NPT fittings are chrome-plated. Made in the USA.

€186.93 €207.70

Cams for Gear Drives — 31 Series, Intake 236°/0.510in, Exhaust 240°/0.510in

-€95.89

ANDREWS Cams for Gear Drives — 31 Series, Intake 236°/0.510in, Exhaust...

Computer-aided designed alloy-steel cams made in the USA. Four-gear set required for installation; installer must verify coil bind and clearances.

€372.91 €468.80

-€14.69
Out of Stock

DRAG SPECIALTIES Stainless Steel Braided Oil Line Kit — 4-line kit, chrome

Direct OEM replacement oil lines with chrome-plated compression and NPT fittings. Made in the USA.

€132.26 €146.95

-€18.40
Out of Stock

DRAG SPECIALTIES Stainless Steel Braided Oil Line Kit — 4-line kit, Chrome

Direct replacements for OEM oil lines. Compression and NPT fittings are chrome-plated. Made in the USA.

€165.64 €184.04

-€18.40
Out of Stock

DRAG SPECIALTIES Stainless Steel Braided Oil Line Kit — 5-line kit, chrome

Direct replacements for OEM oil lines
Compression and NPT fittings are chrome-plated
Made in the USA

€165.64 €184.04

-€15.06
Out of Stock

DRAG SPECIALTIES Stainless Steel Braided Oil Line Kit — Chrome

Direct replacements for OEM oil lines. Compression and NPT fittings are chrome-plated. Made in the USA.

€135.56 €150.62

-€17.43
Out of Stock

DRAG SPECIALTIES Stainless Steel Braided Oil Line Kit — 4-line kit, chrome

Direct replacements for OEM oil lines; chrome-plated compression and NPT fittings; made in the USA.

€156.91 €174.34

-€13.45
Out of Stock

DRAG SPECIALTIES Stainless Steel Braided Oil Line Kit — 3-Line Kit, Chrome

Direct replacements for OEM oil lines. Compression and NPT fittings are chrome-plated. Made in the USA.

€121.06 €134.51

-€13.45
Out of Stock

DRAG SPECIALTIES Stainless Steel Braided Oil Line Kit — 3-line kit, chrome

Direct replacements for OEM oil lines. Compression and NPT fittings are chrome-plated. Made in the USA.

€121.06 €134.51

Universal Stainless Steel Braided Oil Line — 14" length, 11/32" ID, 1/8" NPT, chrome

-€9.14
Out of Stock

DRAG SPECIALTIES Universal Stainless Steel Braided Oil Line — 14" length,...

Universal stainless steel braided oil line; includes 1/8" NPT chrome compression fittings; measured overall including fittings; made in USA.

€25.86 €35.00

Gasket, Seal and O-Ring Display for Big Twin Motors — 48" W x 32" H, 20 mil vinyl, mounts on 1/8" or 1/4" pegboard

-€13.54

DRAG SPECIALTIES Gasket, Seal and O-Ring Display for Big Twin Motors — 48" W x...

Four-color vinyl display for organizing gaskets, seals and O-rings; 48" W x 32" H, 20 mil vinyl, mounts on 1/8" or 1/4" pegboard. Gaskets and seals sold separately.

€121.88 €135.42

Gasket, Seal and O-Ring Display for Big Twin 5-Speed Transmissions — DRAG SPECIALTIES Display Board, PN 0934-0287

-€15.17

DRAG SPECIALTIES Gasket, Seal and O-Ring Display for Big Twin 5-Speed...

Four-color 20 mil flexible vinyl display to organize gaskets, seals and O-rings for most four- or five-speed Big Twin transmissions; mounts on 1/8" or 1/4" pegboard.

€136.56 €151.73

Conversion Chain Driven Cam — N Series, 55 Series grind, Chain Conversion

-€83.72
Out of Stock

ANDREWS Conversion Chain Driven Cam — N Series, 55 Series grind, Chain...

Converts '99-'06 Twin Cam engines (except '06 Dyna Glide) to roller-style cam chains and hydraulic adjusters. Requires additional '07-'17 components; a list is included. Made in the USA.

€325.59 €409.31

$Universal Stainless Steel Braided Oil Line — 1/8\" NPT fittings, 8.7 mm ID, 18\" length, chrome$

-€9.74
Out of Stock

DRAG SPECIALTIES Universal Stainless Steel Braided Oil Line — 1/8\" NPT...

Universal oil line with included compression fittings for easy installation. Measured overall, including fittings. Made in the USA.

€27.55 €37.29

Gasket, Seal and O-Ring Display for 57-85 Xl Motor — DRAG SPECIALTIES, Display Board

-€10.42

DRAG SPECIALTIES Gasket, Seal and O-Ring Display for 57-85 Xl Motor — DRAG...

Four-color vinyl display containing every gasket, seal and O-ring needed to rebuild a 57-85 Xl motor; mounts to 1/8" or 1/4" pegboard.

€93.75 €104.17

-€98.37

ANDREWS Cams for Gear Drives — 21 Series grind, Gear Drive

Computer-designed, heat-treated alloy-steel cams. Four-gear set required for installation; installer must verify coil bind and valve clearances.

€382.53 €480.90

Gasket, Seal and O-Ring Display for Twin Cam Motors — Display Board, 0934-0340

-€14.47

DRAG SPECIALTIES Gasket, Seal and O-Ring Display for Twin Cam Motors — Display...

Complete four-color display showing all gaskets, seals and O-rings needed to rebuild most Twin Cam motors; mounts on 1/8" or 1/4" pegboard. Made in the U.S.A.

€130.26 €144.73

-€84.27

ANDREWS Cams for Gear Drives — 26 Series, Gear Drive, Pair

Computer-assisted cam design for precise timing
Alloy steel billet construction with heat treatment
Made in the USA
Four-gear set required; installer must verify clearances

€327.68 €411.95

Cams for Gear Drives — 55 Series grind, Intake 248°, Exhaust 252°, 0.550" lift

-€98.37

ANDREWS Cams for Gear Drives — 55 Series grind, Intake 248°, Exhaust...

Computer-aided cam design; alloy steel billet construction with heat treatment. Made in the USA. Requires four-gear set; installer must verify clearances prior to final assembly.

€382.53 €480.90

-€10.68

ANDREWS Cam Installation Kit — 216901

Complete kit with gaskets, bearings and installation hardware for gear-driven cams. Made in the U.S.A.

€41.53 €52.21

-€98.37

ANDREWS Cams for Gear Drives — Gear Drive, 59 Series grind, Pair

Computer-designed cam sets machined from alloy steel billets and heat-treated. Made in the USA. Four-gear set required; installer must verify clearances.

€382.53 €480.90

-€94.59
Out of Stock

ANDREWS Cams for Gear Drives — Gear Drive, 67 Series

Computer-designed alloy-steel cams, made in the USA. Four-gear set required; installer must verify coil bind and valve clearances.

€367.82 €462.41

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — 54 Series, intake & exhaust

Precision alloy-steel cam set for gear drive installations. Four-gear set required; installer must verify clearances.

€382.53 €480.90

Tornado Turbo Performance Kit — 107", 114", 117" M-Eight, Black

-€1,595.33

TRASK Tornado Turbo Performance Kit — 107", 114", 117" M-Eight, Black

Bolt-on kit adds 40–50% more power to stock 107", 114", 117" M-Eight motors. Includes larger injectors, spark plugs, boost gauge with mount, oil lines, custom cam cover and Thundermax tune files. Requires Thundermax ECM (sold separately). Does not fit Twin Cooled models or models with non-removable fairing lowers. For offroad use only.

€6,204.07 €7,799.40

-€95.89

ANDREWS Cams for Gear Drives — 54 Series gear drive cam set, pair

Computer-designed alloy-steel cams for gear drives. Four-gear set required; installer must verify clearances.

€372.91 €468.80

Tornado Turbo Performance Kit — Black, TRASK

-€1,595.33
Out of Stock

TRASK Tornado Turbo Performance Kit — Black, TRASK

Bolt-on turbo kit that adds 40%–50% more power to stock 107", 114" and 117" M-Eight motors; includes injectors, tune files and all install hardware. Requires Thundermax ECM; offroad use only.

€6,204.07 €7,799.40

Tornado Turbo Performance Kit — Polished

-€1,595.33

TRASK Tornado Turbo Performance Kit — Polished

Bolt-on power: +40–50% on stock 107", 114" and 117" M‑Eight motors.
Compressor and turbine housing with Garrett internals; plenum with integrated blow-off valve.
Includes injectors, spark plugs, boost gauge with mount, oil feed/drain lines, custom cam cover, tune files, hardware and gaskets.
Requires Thundermax ECM (sold separately). Does not fit Twin Cooled or non-removable fairing lowers. Offroad use only.
Made in the USA.

€6,204.07 €7,799.40

-€29.30

DRAG SPECIALTIES Rocker Box Kit — Chrome, 302180

Quality construction with exact dimensions ensures a leakproof fit. Sold each; two required per motor.

€263.70 €293.00

-€5.83

DRAG SPECIALTIES Oil Filter Line Kit — Chrome

OEM-style oil feed and return lines kit with compression fitting, seals, ferrules and compression nuts for straightforward installation.

€52.47 €58.30

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine