Engine

-€11.51
Out of Stock

KLOCK WERKS Oil Cooler Guard — Black

Precision-cut oil cooler guard that adds visual pop to the center of the oil cooler trim. Easy to install and made in the USA.

€44.75 €56.26

-€179.90
Out of Stock

JIMS Forceflow Cylinder Head Cooler Kit — Chrome

Plug-and-play cooler kit with a high-powered, waterproof fan and temperature-activated switch; includes wiring, hardware and instructions. Not for "Twin Cooled" models.

€699.64 €879.54

Forceflow Cylinder Head Cooler Kit — Black, not for Twin Cooled models

-€151.61
Out of Stock

JIMS Forceflow Cylinder Head Cooler Kit — Black, not for Twin...

Complete plug-and-play cylinder head cooler kit with a waterproof fan, temperature-activated switch (140°F), OEM-type replacement horn, wiring and hardware. Not for "Twin Cooled" models.

€589.64 €741.25

-€179.90
Out of Stock

JIMS Forceflow Cylinder Head Cooler Kit — Chrome

Complete plug-and-play kit with high-powered waterproof fan and temperature-controlled operation; installs without drilling. Not for "Twin Cooled" liquid-cooled heads.

€699.64 €879.54

-€12.46
Out of Stock

NAMZ Oil Sending Unit Cover — Billet aluminum, black

Protects the oil sending unit sensor and connector; precision-machined for a snug, low-profile fit. Made in the USA.

€48.43 €60.89

-€12.46
Out of Stock

NAMZ Oil Sending Unit Cover — Black

Covers and protects the oil sending unit sensor and connector. Easy installation with a smooth, horizontal finish.

€48.43 €60.89

-€12.46
Out of Stock

NAMZ Oil Sending Unit Cover — Black

Protects and conceals the oil sensor and connector; precision-machined for a secure fit. Made in the USA.

€48.43 €60.89

-€12.46
Out of Stock

NAMZ Oil Sending Unit Cover — Polished Silver, Billet Aluminum

Provides neat coverage for the oil sending unit sensor and connector. Made in the USA.

€48.43 €60.89

-€12.46
Out of Stock

NAMZ Oil Sending Unit Cover — Polished

Fits over the oil sending unit sensor and connector. Made from billet aluminum. Made in the USA.

€48.43 €60.89

-€12.46
Out of Stock

NAMZ Oil Sending Unit Cover — Polished silver

Covers the oil sending unit sensor and connector; precision-machined for a consistent fit; made in the USA.

€48.43 €60.89

-€73.75
Out of Stock

JIMS Low-Profile Billet Tappet Covers/Pushrod Cover Kit — Black

Low-profile billet tappet and pushrod cover kit; fits Twin Cam pushrod covers only; sits 1/2" lower than stock; includes gaskets, O-rings and screws; made in USA.

€286.83 €360.58

-€55.92
Out of Stock

JIMS Piston Oiling Jet Kit — Silver

High-flow piston oiling jet kit designed for stock and high-performance flywheels; modified for stroker applications. Made in the U.S.A.

€217.44 €273.36

-€13.47
Out of Stock

JIMS Idler Shaft with Bushing — JIMS, 25791-KIT

Includes shaft and bushing. Made in the U.S.A. Kit for idler gear applications.

€52.38 €65.85

Wrist Pin Bushing — 0.899" O.D. x 0.788" I.D. x 1.065" O.L., Oversize (+0.002")

-€2.46
Out of Stock

KIBBLEWHITE Wrist Pin Bushing — 0.899" O.D. x 0.788" I.D. x 1.065" O.L.,...

Made to exact tolerances for reliable OE-style fit and wear. Made in the USA. Oil hole(s) not included; must be drilled after installation.

€6.93 €9.39

Wrist Pin Bushing — 0.899" O.D. x 0.788" I.D. x 0.945" O.L., Oversize (+0.002")

-€2.71
Out of Stock

KIBBLEWHITE Wrist Pin Bushing — 0.899" O.D. x 0.788" I.D. x 0.945" O.L.,...

Replacement wrist pin bushing made to exact tolerances. Made in the USA. Oil holes not included; drill after installation.

€7.69 €10.40

Wrist Pin Bushing — 0.897" O.D. x 0.788" I.D. x 1.065" O.L., C630 bronze

-€8.79
Out of Stock

KIBBLEWHITE Wrist Pin Bushing — 0.897" O.D. x 0.788" I.D. x 1.065" O.L.,...

Made to exact tolerances to meet or exceed OE-style fitment; oil holes must be drilled after installation. Made in the USA.

€24.86 €33.65

-€12.53
Out of Stock

JIMS Pinion Shaft Bushing — 1.0035", PN 25582-54/73

Quality pinion shaft bushing. Made in the U.S.A.

€48.70 €61.23

-€14.11
Out of Stock

JIMS Circuit Breaker Shaft Kit — JIMS, 25856-KIT

Includes a shaft and two replacement bushings; restores circuit breaker operation. Manufactured in the United States.

€54.90 €69.01

-€39.85
Out of Stock

KIBBLEWHITE Racing Valve Spring Kit — 0.600" lift, 347 lb open, 148 lb seat

High-performance valve spring kit engineered for racing applications. Progressive springs and a complete set for one engine; made in the USA.

€144.74 €184.59

Motor Sprocket Shaft Spacer Kit — 0.366–0.666 in, 8-pack

-€29.50
Out of Stock

JIMS Motor Sprocket Shaft Spacer Kit — 0.366–0.666 in, 8-pack

Eight-piece spacer kit machined to a 32-micron, burr-free finish for extended seal life; fits the sprocket shaft oil seal.

€114.73 €144.23

Shouldered C630 Bronze Valve Guide — ID 0.3098 in, L 2.100 in, OD 0.5620 in

-€8.35
Out of Stock

KIBBLEWHITE Shouldered C630 Bronze Valve Guide — ID 0.3098 in, L 2.100 in,...

Precision-machined nickel-bronze valve guide offering high wear resistance and excellent heat conductivity. Accepts special seals (sold separately).

€23.64 €31.99

Shouldered C630 Bronze Valve Guide — Oversize (+0.001"), 0.3098" ID, 2.100" L

-€7.05
Out of Stock

KIBBLEWHITE Shouldered C630 Bronze Valve Guide — Oversize (+0.001"),...

Precision-machined shouldered valve guide in nickel bronze for superior wear resistance and heat conductivity. Sold each.

€19.98 €27.03

Powdered Metal Valve Seats — 1.535" ID, 0.453" seat height, 1.969" OD

-€3.62
Out of Stock

KIBBLEWHITE Powdered Metal Valve Seats — 1.535" ID, 0.453" seat height,...

High-density powdered metal valve seats offering exceptional wear resistance and thermal stability. Made in the USA. Typically supplied as two intake and two exhaust seats per application.

€10.23 €13.85

Cam Cover Bushing — 1.0035" diameter, bronze

-€8.74
Out of Stock

JIMS Cam Cover Bushing — 1.0035" diameter, bronze

Precision machined cam cover bushing with .0002" tolerance and installation lead-in. Made in the U.S.A.

€33.99 €42.73

Powdered Metal Valve Seats — Intake, ID 1.562", OD 2.007", Height 0.450"

-€4.11
Out of Stock

KIBBLEWHITE Powdered Metal Valve Seats — Intake, ID 1.562", OD 2.007",...

High-density powdered metal valve seats engineered for wear resistance and thermal stability. Track- and street-tested for multi-valve, high-RPM applications. Standard set uses two intake and two exhaust seats.

€11.61 €15.72

$Cam Cover Bushing — 0.9405\" bronze$

-€11.26
Out of Stock

JIMS Cam Cover Bushing — 0.9405\" bronze

Precision machined cam cover bushing with lead-in for easy installation. Made in the U.S.A.

€43.78 €55.04

-€9.31
Out of Stock

KIBBLEWHITE Nitrided Valve — 1.715" head, 0.3100" stem, 4.480" length

One-piece, stellite-tipped nitrided valve with surface buildup to reduce wear and friction; corrosion-resistant and compatible with leaded and unleaded fuels. Made in the USA.

€26.28 €35.59

Nitrided Valve — Oversize, 1.900" head, 0.3100" stem, 4.420" length

-€6.08
Out of Stock

KIBBLEWHITE Nitrided Valve — Oversize, 1.900" head, 0.3100" stem, 4.420"...

Special nitrided one-piece, stellite-tipped valve providing improved wear resistance, reduced friction, excellent flow characteristics and corrosion resistance. Made in the USA.

€20.66 €26.74

C630 Valve Guides — 1.770" L, 0.5650" OD, 0.3085" ID

-€9.07
Out of Stock

KIBBLEWHITE C630 Valve Guides — 1.770" L, 0.5650" OD, 0.3085" ID

Precision-machined C63000 bronze valve guides with tapered nose for improved flow; OEM-style fitment; top-hat seals sold separately; made in USA.

€25.65 €34.72

Cast Iron Valve Guide — 0.3085 in ID, 1.770 in L

-€2.34
Out of Stock

KIBBLEWHITE Cast Iron Valve Guide — 0.3085 in ID, 1.770 in L

Precision-machined cast-iron valve guide compatible with unleaded fuel; OEM-style replacement.

€7.97 €10.31

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine