Engine

Cams for Gear Drives — 31 Series, Intake 236°/0.510in, Exhaust 240°/0.510in

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 31 Series, Intake 236°/0.510in, Exhaust...

Computer-aided designed alloy-steel cams made in the USA. Four-gear set required for installation; installer must verify coil bind and clearances.

€372.91 €468.80

N3 Grind Cams — Intake lift 0.465", Exhaust lift 0.482", 240°/234° duration, 4 Pack

-€101.56
Out of Stock

ANDREWS N3 Grind Cams — Intake lift 0.465", Exhaust lift 0.482",...

Bolt-in N3 grind cam kit for 05–16 883/1200 engines. Runs to 6500 rpm on stock hydraulic lifters. Made in the U.S.A.

€394.98 €496.54

High Flow Camplate — 7075 billet aluminum, Chain drive

-€92.08
Out of Stock

FEULING OIL PUMP CORP. High Flow Camplate — 7075 billet aluminum, Chain drive

Precision-machined camplate that increases oil flow and volume, lowers engine and oil temperatures, and is pressure tested to 55-60 psi. Includes bearing and retainer hardware. For use with Feuling® oil pumps.

€358.14 €450.22

Conversion Chain Driven Cam — N Series, 55 Series grind, Chain Conversion

-€83.72
Out of Stock

ANDREWS Conversion Chain Driven Cam — N Series, 55 Series grind, Chain...

Converts '99-'06 Twin Cam engines (except '06 Dyna Glide) to roller-style cam chains and hydraulic adjusters. Requires additional '07-'17 components; a list is included. Made in the USA.

€325.59 €409.31

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — 21 Series grind, Gear Drive

Computer-designed, heat-treated alloy-steel cams. Four-gear set required for installation; installer must verify coil bind and valve clearances.

€382.53 €480.90

-€84.27
Out of Stock

ANDREWS Cams for Gear Drives — 26 Series, Gear Drive, Pair

Computer-assisted cam design for precise timing
Alloy steel billet construction with heat treatment
Made in the USA
Four-gear set required; installer must verify clearances

€327.68 €411.95

Cams for Gear Drives — 55 Series grind, Intake 248°, Exhaust 252°, 0.550" lift

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — 55 Series grind, Intake 248°, Exhaust...

Computer-aided cam design; alloy steel billet construction with heat treatment. Made in the USA. Requires four-gear set; installer must verify clearances prior to final assembly.

€382.53 €480.90

-€10.68
Out of Stock

ANDREWS Cam Installation Kit — 216901

Complete kit with gaskets, bearings and installation hardware for gear-driven cams. Made in the U.S.A.

€41.53 €52.21

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — Gear Drive, 59 Series grind, Pair

Computer-designed cam sets machined from alloy steel billets and heat-treated. Made in the USA. Four-gear set required; installer must verify clearances.

€382.53 €480.90

-€94.59
Out of Stock

ANDREWS Cams for Gear Drives — Gear Drive, 67 Series

Computer-designed alloy-steel cams, made in the USA. Four-gear set required; installer must verify coil bind and valve clearances.

€367.82 €462.41

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — 54 Series, intake & exhaust

Precision alloy-steel cam set for gear drive installations. Four-gear set required; installer must verify clearances.

€382.53 €480.90

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 54 Series gear drive cam set, pair

Computer-designed alloy-steel cams for gear drives. Four-gear set required; installer must verify clearances.

€372.91 €468.80

-€51.96
Out of Stock

ANDREWS A2 Grind Cam — Exhaust 248° / Intake 242°

Fits 1966–1984 Big Twin engines (except 1980–1981). Increases mid-range and top-end power; idle is unaffected. Check spring travel and clearances on 1980+ models.

€202.08 €254.04

A2 Grind Cam — Fits 1966–1984 Big Twin (except 1980–1981)

-€44.64
Out of Stock

ANDREWS A2 Grind Cam — Fits 1966–1984 Big Twin (except 1980–1981)

Bolts into 1966–1984 Big Twin engines (except 1980–1981); increases mid- and high-rpm power while preserving idle.

€173.65 €218.29

B2 Grind Cam — Andrews, B2 grind, Gear type

-€51.96
Out of Stock

ANDREWS B2 Grind Cam — Andrews, B2 grind, Gear type

More mid-range and high-end power for street/strip with a smooth idle; ideal for 74/80-inch and small stroker engines.

€202.08 €254.04

-€51.96
Out of Stock

ANDREWS B2 Grind Cam — Gear, Intake 256°, Exhaust 258°

Best cam for 74/80 inchers and small strokers; delivers strong mid and high-end power with a smooth idle. Spring spacing and main bearing boss clearance must be checked.

€202.08 €254.04

-€51.96
Out of Stock

ANDREWS 7 Grind Cam — 7 Series, 268° intake/exhaust

Great street cam for 84–88-inch strokers; upgraded from the #6 grind with strong torque from 2,200–6,500 rpm.

€202.08 €254.04

7 Grind Cam — 7 Series, 268° intake/exhaust, 56° exhaust open, 29° intake open

-€51.96
Out of Stock

ANDREWS 7 Grind Cam — 7 Series, 268° intake/exhaust, 56° exhaust open,...

Great street cam for 84/88-inch strokers; upgraded replacement for the #6 grind, boosting torque from 2,200–6,500 rpm.

€202.08 €254.04

Reaper® 525 Cam — 525 Series grind, 236° exhaust duration, 226° intake duration

-€119.78
Out of Stock

FEULING OIL PUMP CORP. Reaper® 525 Cam — 525 Series grind, 236° exhaust duration,...

Bolt-in camshaft upgrade for stock 88" and 96" engines; widens the torque band, improves throttle response and fuel economy.

€338.55 €458.33

Reaper® Camshaft 574 Series — Intake 240°, Exhaust 255°, Lift 0.574"

-€141.31
Out of Stock

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — Intake 240°, Exhaust 255°, Lift...

Power band for modified engines; bolt-in for stock 96", 103" and 110" engines. Smooth cam-lobe design for quiet valvetrain. Made in USA. Performance pushrods, lifters and clutch recommended.

€399.38 €540.69

Reaper® 630 Cam — 630 Series, Exhaust 263°, Intake 258°, Exhaust Lift 0.630"

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 630 Cam — 630 Series, Exhaust 263°, Intake 258°,...

High-performance camshaft that preserves low-end rideability while delivering strong mid and top end power. Requires supporting upgrades and professional tuning.

€366.15 €460.30

-€107.90
Out of Stock

PRO-ONE PERF.MFG. Oil Cooler Kit — For 1"-1-1/4" frame tubing, 305 mm (12"), Chrome

Complete oil cooler kit with AN #6 fittings, frame-mount clamps and reducers, CNC-machined billet aluminum construction.

€304.91 €412.81

Reaper® 630 Cam — 630 Series grind, Exhaust 263°, Intake 258°, Lift 0.630", Chain, Pair

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 630 Cam — 630 Series grind, Exhaust 263°, Intake 258°,...

Aggressive performance cam that preserves low‑end while delivering strong mid and top end power; requires intake/exhaust tuning and valvetrain upgrades.

€366.15 €460.30

-€94.39
Out of Stock

PRO-ONE PERF.MFG. Oil Cooler Kit — For 1"–1-1/4" frame tubing, 305 mm (12")

Compact oil cooler kit with AN #6 fittings, supplied clamps and reducers, and precision-machined components for durable, easy installation.

€266.80 €361.19

-€27.33
Out of Stock

FEULING OIL PUMP CORP. Camshaft Installation Kit — FEULING PARTS, 2065, Standard

Complete camshaft installation kit with bearings, ARP bolts, gaskets and seals. Made in the U.S.A.

€106.26 €133.59

-€2.53
Out of Stock

FEULING OIL PUMP CORP. Bearing Retainer Plate — Cam, Steel

Cam bearing retainer plate and hardware. Recommended for use with all Twin Cam model cam plates. Made in the U.S.A.

€9.88 €12.41

-€7.77
Out of Stock

FEULING OIL PUMP CORP. Camplate Chain Tensioner Pins — FEULING PARTS, 8003, Pair

Made from heat-treated chromoly steel. Ensures proper press fit when changing Twin Cam chain drive cam plates or replacing chain drive tensioners. Made in the U.S.A.

€30.23 €38.00

High Flow Camplate — Chain drive, 7075 billet aluminum, FEULING PARTS, P/N 8011

-€136.27
Out of Stock

FEULING OIL PUMP CORP. High Flow Camplate — Chain drive, 7075 billet aluminum,...

Increases engine oil flow and volume, lowers engine and oil temperatures, adds cam journal protection; pressure-tested with relief valve set to 55–60 psi.

€385.05 €521.32

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — Chain, Pair

Bolt-in camshaft delivering a smooth valvetrain and broad power band for modified and stock 96", 103" and 110" engines.

€366.15 €460.30

HP+® Camchest Kit — Chain drive, Intake & Exhaust, FEULING PARTS 7201

-€420.76
Out of Stock

FEULING OIL PUMP CORP. HP+® Camchest Kit — Chain drive, Intake & Exhaust, FEULING...

Complete camchest kit for '99-'06 Twin Cam (except '06 Dyna). Improves oil pressure, lowers temps, and includes pump, camshafts, lifters and all hardware.

€1,636.28 €2,057.04

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine