Engine

High Flow Camplate — 7075 billet aluminum, Chain drive

-€92.08

FEULING OIL PUMP CORP. High Flow Camplate — 7075 billet aluminum, Chain drive

Precision-machined camplate that increases oil flow and volume, lowers engine and oil temperatures, and is pressure tested to 55-60 psi. Includes bearing and retainer hardware. For use with Feuling® oil pumps.

€358.14 €450.22

-€101.84

LA CHOPPERS Twin Peaks Engine Guard — Silver

The Twin Peaks Engine Guard offers a perfect pairing with the Twin Peaks handlebar, featuring a quick-install, three-piece design made in the U.S.A.

€396.03 €497.87

Twin Peaks Engine Guard — Black gloss finish

-€89.79

LA CHOPPERS Twin Peaks Engine Guard — Black gloss finish

Pairs with Twin Peaks handlebar
Direct bolt-on for Touring bikes
Three-piece, easy-to-adjust design
Mitered corners for seamless flow
Not for use with fairing lowers

€349.15 €438.94

Reaper® 525 Cam — 525 Series grind, 236° exhaust duration, 226° intake duration

-€119.78

FEULING OIL PUMP CORP. Reaper® 525 Cam — 525 Series grind, 236° exhaust duration,...

Bolt-in camshaft upgrade for stock 88" and 96" engines; widens the torque band, improves throttle response and fuel economy.

€338.55 €458.33

Reaper® Camshaft 574 Series — Intake 240°, Exhaust 255°, Lift 0.574"

-€141.31

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — Intake 240°, Exhaust 255°, Lift...

Power band for modified engines; bolt-in for stock 96", 103" and 110" engines. Smooth cam-lobe design for quiet valvetrain. Made in USA. Performance pushrods, lifters and clutch recommended.

€399.38 €540.69

Reaper® 630 Cam — 263° exhaust, 258° intake, 0.630" lift

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 630 Cam — 263° exhaust, 258° intake, 0.630" lift

Wide 2500–6900+ RPM power range
Requires carburetor/throttle body tuning and performance exhaust/intake
High-performance valve springs, pushrods and lifters required
Made in the USA

€366.15 €460.30

Reaper® 630 Cam — 630 Series grind, 263° exhaust duration, 39° overlap

-€94.15

FEULING OIL PUMP CORP. Reaper® 630 Cam — 630 Series grind, 263° exhaust duration, 39°...

High‑performance camshaft that boosts mid and top end power while retaining low‑end performance. Requires carb/throttle body tuning and supporting exhaust and intake systems. Professional installation recommended.

€366.15 €460.30

-€27.33

FEULING OIL PUMP CORP. Camshaft Installation Kit — Camshaft kit, Part 2065

Complete camshaft installation kit with quick change gaskets and premium roller bearings for reliable camplate service.

€106.26 €133.59

-€2.53

FEULING OIL PUMP CORP. Bearing Retainer Plate — Cam, steel

Cam bearing retainer plate and hardware; fits Twin Cam model cam plates. Not for '06 Dyna or Screamin' Eagle support plates.

€9.88 €12.41

-€7.77
Out of Stock

FEULING OIL PUMP CORP. Camplate Chain Tensioner Pins — Pair

Pair of precision pins that ensure correct press fit when servicing Twin Cam chain drive cam plates and tensioners.

€30.23 €38.00

-€136.27

FEULING OIL PUMP CORP. High Flow Camplate — Chain conversion

Increases engine oil flow and cooling; pressure-tested with relief valve set to 55–60 psi. Includes bearing and retainer plate hardware. For use only with Feuling® oil pumps.

€385.05 €521.32

-€94.15

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — Chain, Pair

Bolt-in camshaft delivering a smooth valvetrain and broad power band for modified and stock 96", 103" and 110" engines.

€366.15 €460.30

HP+® Camchest Kit — Chain drive, Intake & Exhaust, FEULING PARTS 7201

-€420.76

FEULING OIL PUMP CORP. HP+® Camchest Kit — Chain drive, Intake & Exhaust, FEULING...

Complete camchest kit for '99-'06 Twin Cam (except '06 Dyna). Improves oil pressure, lowers temps, and includes pump, camshafts, lifters and all hardware.

€1,636.28 €2,057.04

-€420.76

FEULING OIL PUMP CORP. HP+® Camchest Kit — Chain Drive, 574 Series

Complete camchest replacement kit for '99-'06 Twin Cam (except '06 Dyna). Restores reliability, increases oil pressure and flow, reduces engine and oil temperatures, and includes all necessary components for installation.

€1,636.28 €2,057.04

-€18.14

FEULING OIL PUMP CORP. Gear Cross Logo Points Cover — Black

Precision machined 6061 billet aluminum points cover that bolts to the factory cam cover; includes stainless button head fasteners.

€70.51 €88.65

-€94.15

FEULING OIL PUMP CORP. Reaper® Camshaft Chain Drive Conversion — 574 Series, Pair

Bolt-in chain conversion for stock 103" and 110" engines; broad power band for modified big-bore engines. Recommended 2000–6800 rpm.

€366.15 €460.30

-€23.88

FEULING OIL PUMP CORP. Camshaft Installation Kit — Standard, Chain Conversion, Kit, 2063

Complete camshaft installation kit with roller bearings, Koyo Torrington® needle bearings, 12-point ARP® bolts, gaskets and installation hardware. Quick change and top-end options available. Made in the U.S.A.

€92.88 €116.76

-€91.64

JE PISTONS Piston Kit — 3.875 in bore, 1545 cc, 10.5:1

Machined from 2618-T6 forged aluminum for professional competition; pins, pin locks and rings included. Made in the U.S.A.

€259.30 €350.94

-€21.02

THRASHIN SUPPLY CO. Points Cover — Polished

Protects ignition points and wiring while allowing quick access for inspection and adjustment.

€59.43 €80.45

-€29.14

FEULING OIL PUMP CORP. Camshaft Installation Kit — Plus, Chain Conversion

Complete camshaft installation kit with roller bearings, ARP bolts, gasket sets, and quick-change/top-end options. Made in the U.S.A.

€113.32 €142.46

-€91.64

JE PISTONS Piston Kit — 3.937", 9.5:1, 1595 cc

High-strength 2618-T6 forged-aluminum piston kit for competition; includes pins, locks and rings. Made in USA.

€259.31 €350.95

-€128.49

JE PISTONS Piston Kit — 3.937 in, 10.5:1, 1595 cc

High-strength forged 2618-T6 aluminum piston kit for extreme and competition use. Pins, locks and rings included. Made in the U.S.A.

€363.56 €492.05

Reaper® 543 Cam — 543 Series grind, fits 88", 96", 103", 1900–6000 RPM

-€87.64

FEULING OIL PUMP CORP. Reaper® 543 Cam — 543 Series grind, fits 88", 96", 103",...

Broad, smooth power from 1900–6000 RPM; bolt-in fit for stock to mid 96" and 103" engines.

€340.80 €428.44

-€87.64

FEULING OIL PUMP CORP. Reaper® 543 Cam — 543 Series, Chain Conversion

Smooth midrange power with strong low-end torque. Bolt-in cam for many 88"–103" engines; performance valve springs required on '99–'04 models.

€340.80 €428.44

-€17.78

FEULING OIL PUMP CORP. Gear Cross Logo Points Cover — Black, Point

Machined 6061 billet aluminum points cover with black powder coat; bolts to factory cam cover. Includes stainless steel button head fasteners. Made in the United States.

€69.10 €86.88

Reaper® 594 Cam — 594 Series grind, 260° exhaust / 255° intake, 0.604" lift

-€94.15

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 Series grind, 260° exhaust / 255°...

Fierce-performing camshaft for 103", 110" and 124" engines; boosts torque and horsepower across wide RPM ranges. Made in the USA.

€366.15 €460.30

-€94.15

FEULING OIL PUMP CORP. Reaper® 543 Cam — 543 Series, Exhaust 248°, Intake 238°, Pair

Broad, smooth power band with strong low-end torque.

Bolt-in fit for many 88", 96" and 103" engines.

Improves throttle response and fuel mileage; recommended upgrades for some model years.

€366.15 €460.30

Points Cover — Polished, 6061 billet aluminum

-€21.02

THRASHIN SUPPLY CO. Points Cover — Polished, 6061 billet aluminum

Protects the ignition points with a clean, bolt-on cover; easy to install and maintain.

€59.43 €80.45

Reaper® 594 Cam — 594 Series grind, Intake 255°, Exhaust 260°, Intake lift 0.594", Exhaust lift 0.604"

-€94.15

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 Series grind, Intake 255°, Exhaust 260°,...

Fierce-performing camshaft for large and small displacements, offering strong torque and horsepower gains; requires complementary performance upgrades. Made in the USA.

€366.15 €460.30

Reaper® 594 Cam — 594 Series, Intake 255°, Exhaust 260°, Lift 0.594"/0.604"

-€94.15

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 Series, Intake 255°, Exhaust 260°, Lift...

Fierce-performing camshaft for large (103", 110", 124") and small 95" displacement engines; requires upgraded valve springs, pushrods, lifters, intake/exhaust and clutch.

€366.15 €460.30

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine