Engine

Valve Stem Kit Replacement Part — 8 mm diameter, PVR59A 90° metal valve stem, silver

-€3.15

K&L SUPPLY Valve Stem Kit Replacement Part — 8 mm diameter, PVR59A 90°...

Replacement part for valve stem kits. Easy installation; restores seal and helps maintain tire pressure.

€8.91 €12.06

High Flow Camplate — High Flow, Gear Drive, Chain Drive, 7075 Billet Aluminum

-€86.08

FEULING OIL PUMP CORP. High Flow Camplate — High Flow, Gear Drive, Chain Drive, 7075...

Improves oil circulation by matching camplate and case portholes, increases oil volume and cooling, includes bearing and retainer hardware. For use only with Feuling® oil pumps.

€334.76 €420.84

-€88.10

K&L SUPPLY Valve Stem Kit — Assortment, Black, Raw

Complete assortment of metal, rubber and aluminum valve stems with popular caps, cores and a 4-in-1 repair tool. Replacement parts sold separately.

€248.98 €337.08

-€1.03

K&L SUPPLY Straight Valve Stem — 10 mm hole (0.39"), aluminum, silver

Provides a secure seal and easy inflation for most tubeless tire rims.

€2.92 €3.95

-€1.62

K&L SUPPLY 90° Bend/Angled Valve Stem — 90° bend, 10 mm (0.39"), blue

Angled stem provides clear access on dual-disc wheels and simplifies inflation. Eliminates wrestling the air chuck between the brake discs. Lightweight construction reduces rotating weight. Compatible with most tubeless rims.

€4.58 €6.20

-€2.38

K&L SUPPLY 90° Bend/Angled Valve Stem — Fits hole 10 mm (0.39")

Angled tire valve for easy inflation on dual-disc wheels; compatible with most tubeless rims.

€6.69 €9.07

$90° Bend/Angled Valve Stem — 10 mm (0.39\"), Gold$

-€1.62

K&L SUPPLY 90° Bend/Angled Valve Stem — 10 mm (0.39\"), Gold

Right-angle valve stem for easy inflation on dual disc wheels. Compatible with most tubeless rims. Lightweight construction.

€4.58 €6.20

$90° Angle Valve Stem — 11.5 mm hole (0.45\"), Gold$

-€2.50

K&L SUPPLY 90° Angle Valve Stem — 11.5 mm hole (0.45\"), Gold

Angled short valve stem with a direct 90° bend for easy inflation on dual disc wheels. For tubeless tires.

€7.07 €9.57

Camshaft Sprocket Thrust Washer Alignment Spacer Kit — front 0.100", rear 0.110"–0.150"

-€15.08

FEULING OIL PUMP CORP. Camshaft Sprocket Thrust Washer Alignment Spacer Kit — front...

Alignment kit for camshaft sprocket and crankshaft on '99-'06 engines; includes front thrust washer 0.100" and rear alignment washers 0.110"–0.150".

€58.80 €73.88

-€21.02

ACCUTRONIX Points Cover — Black-anodized

Billet construction points cover with Maltese cross styling; mounting hardware included; made in the USA.

€81.74 €102.76

-€6.12

FEULING OIL PUMP CORP. Camplate Pressure Relief Spring — 6-pack

Increases pressure relief valve pop-off pressure, controls bypass oil flow; spring-only solution made in USA.

€23.81 €29.93

Reaper® 525 Cam — 525 Series grind, Intake 0.525" lift, Exhaust 0.535" lift

-€85.50

FEULING OIL PUMP CORP. Reaper® 525 Cam — 525 Series grind, Intake 0.525" lift,...

Bolt-in camshaft upgrade that broadens low- and mid-range torque, improves throttle response and enhances fuel economy.

€332.49 €417.99

-€85.50

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — intake 240°, exhaust 255°

Broad power band for modified engines; bolt-in for stock 96", 103" and 110" engines.

€332.49 €417.99

-€85.50

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — Exhaust 255°, Intake 240°

Broad power band for modified and stock 96\", 103\" and 110\" engines.

Smooth cam-lobe design for quiet valvetrain operation.

Made in the USA; performance pushrods, lifters and clutch recommended.

€332.49 €417.99

-€32.67

FEULING OIL PUMP CORP. Camshaft Installation Kit — 2060

Complete camshaft installation kit with gaskets, bearings, fasteners, and O-rings.
Includes quick change gasket kit and hardened washers.
Precision bearings and ARP® hardware for secure assembly.
Made in the USA.

€127.03 €159.70

-€22.50

FEULING OIL PUMP CORP. Camshaft Installation Kit — Camshaft

Complete camshaft installation kit with gasket set, bearings, ARP® bolts and necessary o-rings; made in the USA.

€87.50 €110.00

-€5.78

FEULING OIL PUMP CORP. Pressure Relief Kit — Cam plate, Part 8002

Increases pop-off psi; kit includes valve plunger, spring and roll pin. Bench testing recommended.

€22.45 €28.23

Reaper® 525 Cam — 525 Series, 236° exhaust, 226° intake, 0.535" exhaust lift, 0.525" intake lift

-€85.50

FEULING OIL PUMP CORP. Reaper® 525 Cam — 525 Series, 236° exhaust, 226° intake,...

Bolt-in camshaft that broadens the torque band, improves fuel economy and boosts low- and mid-range power; compatible with factory valve springs, pushrods and lifters.

€332.49 €417.99

-€382.08

FEULING OIL PUMP CORP. HP+® Camchest Kit — Chain drive

Complete camchest overhaul kit that lowers engine and oil temperatures, increases oil pressure and improves smoothness and reliability. Includes high-volume oil pump, Reaper® camshafts, hydraulic roller lifters, Timken® bearings and ARP® fasteners. Fits '07-'17 Twin Cam and '06 Dyna.

€1,485.86 €1,867.94

-€38.82

FEULING OIL PUMP CORP. Camshaft Installation Plus Kit

Complete camshaft installation kit with gaskets, bearings, ARP® bolts, and service seals. Made in the USA.

€150.98 €189.80

-€33.81

FEULING OIL PUMP CORP. Camshaft Installation Plus Kit — Plus, Camshaft

Complete camshaft and top-end installation kit with quick-change and top-end gasket sets, bearings, ARP® bolts and installation compounds. Made in the USA.

€131.45 €165.26

-€29.41

FEULING OIL PUMP CORP. Camshaft Installation Plus Kit — Camshaft, Kit

Complete camshaft installation kit with gasket sets, roller bearings, Koyo Torrington® needle bearings, 12-point ARP® bolts, moly paste and Loctite®.

€114.38 €143.79

-€85.50

FEULING OIL PUMP CORP. Reaper® Conversion Chain Drive Camshaft — 525 Series

Hybrid conversion camshaft; bolt-in for stock 88" and 96" engines. Broadens torque band, improves throttle response, 1750–5500 rpm.

€332.49 €417.99

Reaper® 543 Cam — 543 Series grind, fits 88", 96", 103", 1900–6000 RPM

-€87.64

FEULING OIL PUMP CORP. Reaper® 543 Cam — 543 Series grind, fits 88", 96", 103",...

Broad, smooth power from 1900–6000 RPM; bolt-in fit for stock to mid 96" and 103" engines.

€340.80 €428.44

-€85.50

FEULING OIL PUMP CORP. Reaper® 543 Cam — 543 Series, fits 88–103 cu in engines

More power than 525 cams without losing low-end torque
Smooth, quiet valve train with refined cruise power band
Bolt-in for stock to mid 96" and 103" engines; responds well to compression, exhaust, and air-flow upgrades

€332.49 €417.99

-€92.57

FEULING OIL PUMP CORP. Reaper® 505/515 Cam — Split lift, Exhaust 248°, Intake 239°

Wide, rideable powerband for stock engines.

Split lift character with top fuel sound.

Use with stock pushrods and valve springs; lifter change recommended.

€360.00 €452.57

-€35.45

FEULING OIL PUMP CORP. Camshaft Installation Kit — Part 2058

Complete camshaft installation kit with gaskets, bearings, bolts and seals for full cam and crank service. Made in the USA.

€137.85 €173.30

-€43.40

FEULING OIL PUMP CORP. Camshaft Installation Plus Kit — Model Plus, P/N 2059

Complete installation kit with gaskets, bearings, and ARP® hardware for reliable camshaft assembly.

€168.76 €212.16

-€60.31

FEULING OIL PUMP CORP. OE+ Camplate — 6061 aluminum

Direct bolt-in replacement for '99–'06 Twin Cam® camshafts. Pre-set pressure relief valve (50–60 psi), added cam journal oil groove, accepts factory oil pump. Includes bearing retainer plate and hardware. Made in USA.

€234.53 €294.84

-€65.93

FEULING OIL PUMP CORP. OE+ Camplate — Fits '99–'06 Twin Cam®

Direct bolt-in camplate for '99–'06 Twin Cam® engines; pre-set relief valve (50–60 psi), added oil grooves and feed holes, includes retainer plate and hardware.

€256.36 €322.29

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine