Engine

-€19.20

DRAG SPECIALTIES Crankcase Vent Line — Chrome

Durable replacement for the OEM rubber crankcase-to-oil tank line; includes fittings for easy installation; made in the USA.

€54.26 €73.46

-€44.73

DRAG SPECIALTIES Stainless Steel Braided Oil Line Kit — 4-line kit, chrome

Complete replacement kit with chrome-plated compression and NPT fittings. Direct OEM-fit replacement; made in the USA.

€126.42 €171.15

High Flow Camplate — High Flow, Gear Drive, Chain Drive, 7075 Billet Aluminum

-€86.08

FEULING OIL PUMP CORP. High Flow Camplate — High Flow, Gear Drive, Chain Drive, 7075...

Improves oil circulation by matching camplate and case portholes, increases oil volume and cooling, includes bearing and retainer hardware. For use only with Feuling® oil pumps.

€334.76 €420.84

Universal Stainless Steel Braided Oil Line — 8.7 mm (11/32"), 205 mm (8"), 1/8" NPT, Chrome

-€10.80

DRAG SPECIALTIES Universal Stainless Steel Braided Oil Line — 8.7 mm (11/32"),...

Universal braided oil line with compression fittings; measured overall including fittings; made in the USA.

€20.05 €30.85

Camshaft/Sprocket Thrust Washer Alignment Kit — 1999–2006 fitment, front 0.100", rear 0.110–0.150"

-€15.08

FEULING OIL PUMP CORP. Camshaft/Sprocket Thrust Washer Alignment Kit — 1999–2006...

Aligns the rear cam sprocket to the crank sprocket for correct chain alignment. Includes front thrust washer 0.100" and rear alignment washers 0.110", 0.120", 0.130", 0.140", 0.150".

€58.80 €73.88

Tornado Turbo Performance Kit — 107", 114", 117" M-Eight, Black

-€1,595.33

TRASK Tornado Turbo Performance Kit — 107", 114", 117" M-Eight, Black

Bolt-on kit adds 40–50% more power to stock 107", 114", 117" M-Eight motors. Includes larger injectors, spark plugs, boost gauge with mount, oil lines, custom cam cover and Thundermax tune files. Requires Thundermax ECM (sold separately). Does not fit Twin Cooled models or models with non-removable fairing lowers. For offroad use only.

€6,204.07 €7,799.40

-€25.61

DRAG SPECIALTIES Fuel/Oil Line — 9.5 mm (3/8"), 244 cm (8'), Black

Reinforced smooth-bore fuel and oil line that resists fuel and oil. Made in the USA.

€47.56 €73.17

-€7.96

DRAG SPECIALTIES Fuel/Oil Line — 12.7 mm (1/2"), 61 cm (24")

Reinforced, smooth-bore fuel- and oil-resistant line for reliable service.

€14.79 €22.75

Tornado Turbo Performance Kit — Polished

-€1,595.33

TRASK Tornado Turbo Performance Kit — Polished

Bolt-on power: +40–50% on stock 107", 114" and 117" M‑Eight motors.
Compressor and turbine housing with Garrett internals; plenum with integrated blow-off valve.
Includes injectors, spark plugs, boost gauge with mount, oil feed/drain lines, custom cam cover, tune files, hardware and gaskets.
Requires Thundermax ECM (sold separately). Does not fit Twin Cooled or non-removable fairing lowers. Offroad use only.
Made in the USA.

€6,204.07 €7,799.40

-€3.01

DRAG SPECIALTIES Oil Line Retainer Assembly — 3/8" retainer, black

Secures oil lines from the oil tank to the engine. Replacement recommended when lines are removed. O-rings included.

€8.51 €11.52

-€3.01

DRAG SPECIALTIES Oil Line Retainer Assembly — 1/2" retainer, black

Secures oil lines from the oil tank to the engine. Replacement recommended when lines are removed. O-rings included.

€8.51 €11.52

-€22.65

DRAG SPECIALTIES Cam Cover — Cam, Chrome

Die-cast cam cover accepts OEM-style timing covers and factory gaskets and mounting hardware.

€64.01 €86.66

-€6.82

DRAG SPECIALTIES Lower Fitting Seals — 10 Pack, Black

Seals for lower fittings used on oil feed and return lines; replace worn seals to prevent leaks.

€12.67 €19.49

-€8.46

DRAG SPECIALTIES Lower Fitting Seals — 10 pack, brown

Seals for lower fittings on oil feed and return lines; replace when worn to prevent leaks.

€15.72 €24.18

-€62.97

DRAG SPECIALTIES Rocker Box Kit — I33-0103A, Chrome

Quality construction with exact dimensions for a leakproof fit. Sold each; two required per motor.

€177.97 €240.94

-€6.12

FEULING OIL PUMP CORP. Camplate Pressure Relief Spring — 6-pack

Increases pressure relief valve pop-off psi. Spring alone provides the correct spring rate to control pop-off pressure and oil flow in the bypass port. Made in the United States.

€23.81 €29.93

-€40.89

DRAG SPECIALTIES Cam Cover — Chrome

Die-cast construction with OEM-spec bushings; includes oil seal, mounting hardware and gasket.

€115.53 €156.42

-€52.41

DRAG SPECIALTIES Cam Cover — Chrome

Die-cast aluminum cam cover; bushings installed to OEM specs. Includes oil seal, mounting hardware and gasket.

€148.11 €200.52

-€4.94

DRAG SPECIALTIES Live To Ride Points Cover — Black, Chrome

Die-cast construction with a detailed eagle, banner and script; low-profile fit and easy installation.

€13.97 €18.91

-€8.15

DRAG SPECIALTIES Live To Ride Points Cover — Black, Chrome, Gold

Die-cast aluminum points cover featuring a detailed eagle with banner and script. Easy to install and ideal for vintage styling.

€23.02 €31.17

Reaper® 525 Cam — 525 Series grind, Intake 0.525" lift, Exhaust 0.535" lift

-€85.50

FEULING OIL PUMP CORP. Reaper® 525 Cam — 525 Series grind, Intake 0.525" lift,...

Bolt-in camshaft upgrade that broadens low- and mid-range torque, improves throttle response and enhances fuel economy.

€332.49 €417.99

-€5.40

DRAG SPECIALTIES Live To Ride Points Cover — Black, Chrome

Die-cast cover with detailed eagle, banner and scripted lettering.

€15.26 €20.66

$Reaper® Camshaft 574 Series — fits 96\", 103\", 110\" engines$

-€85.50

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — fits 96\", 103\", 110\" engines

Broad midrange power band camshaft with a smooth lobe design. Made in the USA. Performance pushrods, lifters and clutch recommended.

€332.49 €417.99

-€5.78

DRAG SPECIALTIES Live To Ride Points Cover — Black, Chrome

Die-cast aluminum construction; detailed eagle with banner and script.

€16.34 €22.12

Reaper® Camshaft 574 Series — 255° exhaust, 240° intake, 0.574" lift

-€85.50

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — 255° exhaust, 240° intake,...

Power band for modified engines; bolt-in for stock 96", 103" and 110" engines. Smooth cam-lobe design. Made in the USA.

€332.49 €417.99

-€1.03

DRAG SPECIALTIES Oil Drain Elbow — Black, Rubber

Directs used oil cleanly into a drain pan to minimize spills during oil changes.

€2.91 €3.94

-€32.67

FEULING OIL PUMP CORP. Camshaft Installation Kit — P/N 2060, Standard

Complete camshaft installation kit with premium bearings, ARP® hardware, gaskets and seals. Made in the U.S.A.

€127.03 €159.70

Camshaft Installation Kit — Model Standard, Vendor Part Number 2070

-€22.50

FEULING OIL PUMP CORP. Camshaft Installation Kit — Model Standard, Vendor Part Number...

Complete kit with roller bearings, ARP® bolts, gaskets and hardware to install bolt-in and high-lift camshafts.

€87.50 €110.00

-€5.78

FEULING OIL PUMP CORP. Pressure Relief Kit — FEULING PARTS 8002

Increases relief valve pop-off psi; kit includes valve plunger, spring and roll pin; spring controls pop-off pressure and oil flow; made in the USA.

€22.45 €28.23

Universal Oil Cooler — 6-row, 90°, bolt-on bottom mount, black powder-coated

-€58.21

JAGG OIL COOLERS Universal Oil Cooler — 6-row, 90°, bolt-on bottom mount, black...

High-quality universal oil cooler with fully-brazed construction. Ideal for custom builds and racing; mounting hardware sold separately.

€135.82 €194.03

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine