Engine

Valve Stem Kit Replacement Part — 8 mm diameter, PVR59A 90° metal valve stem, silver

-€3.15

K&L SUPPLY Valve Stem Kit Replacement Part — 8 mm diameter, PVR59A 90°...

Replacement part for valve stem kits. Easy installation; restores seal and helps maintain tire pressure.

€8.91 €12.06

High Flow Camplate — High Flow, Gear Drive, Chain Drive, 7075 Billet Aluminum

-€86.08

FEULING OIL PUMP CORP. High Flow Camplate — High Flow, Gear Drive, Chain Drive, 7075...

Improves oil circulation by matching camplate and case portholes, increases oil volume and cooling, includes bearing and retainer hardware. For use only with Feuling® oil pumps.

€334.76 €420.84

-€88.10

K&L SUPPLY Valve Stem Kit

The Valve Stem Kit provides essential components for tire maintenance, including a variety of metal, rubber, and aluminum valve stems, as well as caps and cores.

€248.98 €337.08

-€1.03

K&L SUPPLY Straight Valve Stem — 10 mm hole (0.39"), aluminum, silver

Provides a secure seal and easy inflation for most tubeless tire rims.

€2.92 €3.95

-€1.07

K&L SUPPLY 90° Bend/Angled Valve Stem — 8 mm (0.32") , Silver

Right-angle valve stem that simplifies tire inflation on dual-disc wheels; fits most tubeless rims.

€3.02 €4.09

-€1.62

K&L SUPPLY 90° Bend/Angled Valve Stem

The 90° Bend/Angled Valve Stem simplifies tire inflation on dual disc wheels and is compatible with most tubeless tire rims.

€4.58 €6.20

-€1.62

K&L SUPPLY 90° Bend/Angled Valve Stem

The 90° Bend/Angled Valve Stem simplifies tire inflation on dual disc wheels and is compatible with most tubeless tire rims.

€4.58 €6.20

-€5.15

K&L SUPPLY Short Valve Stem

Short Valve Stem suitable for tubeless tire rims.

€14.53 €19.68

Camshaft/Sprocket Thrust Washer Alignment Kit — 1999–2006 fitment, front 0.100", rear 0.110–0.150"

-€15.08

FEULING OIL PUMP CORP. Camshaft/Sprocket Thrust Washer Alignment Kit — 1999–2006...

Aligns the rear cam sprocket to the crank sprocket for correct chain alignment. Includes front thrust washer 0.100" and rear alignment washers 0.110", 0.120", 0.130", 0.140", 0.150".

€58.80 €73.88

-€6.12

FEULING OIL PUMP CORP. Camplate Pressure Relief Spring — 6-pack

Increases pressure relief valve pop-off pressure, controls bypass oil flow; spring-only solution made in USA.

€23.81 €29.93

Reaper® 525 Cam — 525 Series grind, Intake 0.525" lift, Exhaust 0.535" lift

-€85.50

FEULING OIL PUMP CORP. Reaper® 525 Cam — 525 Series grind, Intake 0.525" lift,...

Bolt-in camshaft upgrade that broadens low- and mid-range torque, improves throttle response and enhances fuel economy.

€332.49 €417.99

$Reaper® Camshaft 574 Series — fits 96\", 103\", 110\" engines$

-€85.50

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — fits 96\", 103\", 110\" engines

Broad midrange power band camshaft with a smooth lobe design. Made in the USA. Performance pushrods, lifters and clutch recommended.

€332.49 €417.99

-€85.50

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — Exhaust 255°, Intake 240°

Broad power band for modified and stock 96\", 103\" and 110\" engines.

Smooth cam-lobe design for quiet valvetrain operation.

Made in the USA; performance pushrods, lifters and clutch recommended.

€332.49 €417.99

-€32.67

FEULING OIL PUMP CORP. Camshaft Installation Kit — 2060

Complete camshaft installation kit with gaskets, bearings, fasteners, and O-rings.
Includes quick change gasket kit and hardened washers.
Precision bearings and ARP® hardware for secure assembly.
Made in the USA.

€127.03 €159.70

Camshaft Installation Kit — Model Standard, Vendor Part Number 2070

-€22.50

FEULING OIL PUMP CORP. Camshaft Installation Kit — Model Standard, Vendor Part Number...

Complete kit with roller bearings, ARP® bolts, gaskets and hardware to install bolt-in and high-lift camshafts.

€87.50 €110.00

-€5.78

FEULING OIL PUMP CORP. Pressure Relief Kit — FEULING PARTS 8002

Increases relief valve pop-off psi; kit includes valve plunger, spring and roll pin; spring controls pop-off pressure and oil flow; made in the USA.

€22.45 €28.23

Reaper® 525 Cam — 525 Series, 236° exhaust, 226° intake, 0.535" exhaust lift, 0.525" intake lift

-€85.50

FEULING OIL PUMP CORP. Reaper® 525 Cam — 525 Series, 236° exhaust, 226° intake,...

Bolt-in camshaft that broadens the torque band, improves fuel economy and boosts low- and mid-range power; compatible with factory valve springs, pushrods and lifters.

€332.49 €417.99

-€382.08

FEULING OIL PUMP CORP. HP+® Camchest Kit — Chain drive

Complete camchest overhaul kit that lowers engine and oil temperatures, increases oil pressure and improves smoothness and reliability. Includes high-volume oil pump, Reaper® camshafts, hydraulic roller lifters, Timken® bearings and ARP® fasteners. Fits '07-'17 Twin Cam and '06 Dyna.

€1,485.86 €1,867.94

-€38.82

FEULING OIL PUMP CORP. Camshaft Installation Plus Kit

Complete camshaft installation kit with gaskets, bearings, ARP® bolts, and service seals. Made in the USA.

€150.98 €189.80

-€33.81

FEULING OIL PUMP CORP. Camshaft Installation Plus Kit — Plus, Camshaft

Complete camshaft and top-end installation kit with quick-change and top-end gasket sets, bearings, ARP® bolts and installation compounds. Made in the USA.

€131.45 €165.26

-€29.41

FEULING OIL PUMP CORP. Camshaft Installation Plus Kit — Camshaft, Kit

Complete camshaft installation kit with gasket sets, roller bearings, Koyo Torrington® needle bearings, 12-point ARP® bolts, moly paste and Loctite®.

€114.38 €143.79

-€85.50

FEULING OIL PUMP CORP. Reaper® Conversion Chain Drive Camshaft — 525 Series

Hybrid conversion camshaft; bolt-in for stock 88" and 96" engines. Broadens torque band, improves throttle response, 1750–5500 rpm.

€332.49 €417.99

-€85.50

FEULING OIL PUMP CORP. Reaper® 543 Cam — 543 Series, fits 88–103 cu in engines

More power than 525 cams without losing low-end torque
Smooth, quiet valve train with refined cruise power band
Bolt-in for stock to mid 96" and 103" engines; responds well to compression, exhaust, and air-flow upgrades

€332.49 €417.99

Radiator Guard — Anodized gray, 6061 aluminum

-€37.44

DYNOJET-HARLEY Radiator Guard — Anodized gray, 6061 aluminum

Durable radiator guard with mounting bracket for easy installation. Protects against rocks and road debris. Made in the USA.

€145.63 €183.07

-€92.57

FEULING OIL PUMP CORP. Reaper® 505/515 Cam — Split lift, Exhaust 248°, Intake 239°

Wide, rideable powerband for stock engines.

Split lift character with top fuel sound.

Use with stock pushrods and valve springs; lifter change recommended.

€360.00 €452.57

-€35.45

FEULING OIL PUMP CORP. Camshaft Installation Kit — Part 2058

Complete camshaft installation kit with gaskets, bearings, bolts and seals for full cam and crank service. Made in the USA.

€137.85 €173.30

-€43.40

FEULING OIL PUMP CORP. Camshaft Installation Plus Kit — Model Plus, P/N 2059

Complete installation kit with gaskets, bearings, and ARP® hardware for reliable camshaft assembly.

€168.76 €212.16

-€60.31

FEULING OIL PUMP CORP. OE+ Camplate — 6061 aluminum

Direct bolt-in replacement for '99–'06 Twin Cam® camshafts. Pre-set pressure relief valve (50–60 psi), added cam journal oil groove, accepts factory oil pump. Includes bearing retainer plate and hardware. Made in USA.

€234.53 €294.84

-€65.93

FEULING OIL PUMP CORP. OE+ Camplate — Fits '99–'06 Twin Cam®

Direct bolt-in camplate for '99–'06 Twin Cam® engines; pre-set relief valve (50–60 psi), added oil grooves and feed holes, includes retainer plate and hardware.

€256.36 €322.29

-€64.79

FEULING OIL PUMP CORP. OE+ Camplate — 6061 Aluminum

Direct bolt-in stock replacement camplate engineered for improved lubrication and cold-start protection. Preset relief valve (50–60 psi); includes bearing retainer plate and hardware.

€251.97 €316.76

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine