Engine

High Flow Camplate — High Flow, Gear Drive, Chain Drive, 7075 Billet Aluminum

-€86.08

FEULING OIL PUMP CORP. High Flow Camplate — High Flow, Gear Drive, Chain Drive, 7075...

Improves oil circulation by matching camplate and case portholes, increases oil volume and cooling, includes bearing and retainer hardware. For use only with Feuling® oil pumps.

€334.76 €420.84

-€56.72

SW-MOTECH Engine Guard — Black

The Engine Guard provides essential underbody protection for your Harley-Davidson against rock chips and collisions. It features easy installation with no modifications needed, ensuring a perfect fit.

€220.59 €277.31

Camshaft/Sprocket Thrust Washer Alignment Kit — 1999–2006 fitment, front 0.100", rear 0.110–0.150"

-€15.08

FEULING OIL PUMP CORP. Camshaft/Sprocket Thrust Washer Alignment Kit — 1999–2006...

Aligns the rear cam sprocket to the crank sprocket for correct chain alignment. Includes front thrust washer 0.100" and rear alignment washers 0.110", 0.120", 0.130", 0.140", 0.150".

€58.80 €73.88

-€28.17

GOODRIDGE Hose — 366 cm (12'), stainless steel, chrome, 600-06-4

Replacement hose for reliable fluid routing. Durable construction and straightforward installation.

€39.84 €68.01

-€13.34
Out of Stock

GOODRIDGE Fitting — oil line, chrome

Easy-to-assemble, high quality. Meets 96-hour salt spray testing. Ships complete with sealing ferrule.

€32.51 €45.85

-€6.12

FEULING OIL PUMP CORP. Camplate Pressure Relief Spring — 6-pack

Increases pressure relief valve pop-off pressure, controls bypass oil flow; spring-only solution made in USA.

€23.81 €29.93

Reaper® 525 Cam — 525 Series grind, Intake 0.525" lift, Exhaust 0.535" lift

-€85.50

FEULING OIL PUMP CORP. Reaper® 525 Cam — 525 Series grind, Intake 0.525" lift,...

Bolt-in camshaft upgrade that broadens low- and mid-range torque, improves throttle response and enhances fuel economy.

€332.49 €417.99

$Reaper® Camshaft 574 Series — fits 96\", 103\", 110\" engines$

-€85.50

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — fits 96\", 103\", 110\" engines

Broad midrange power band camshaft with a smooth lobe design. Made in the USA. Performance pushrods, lifters and clutch recommended.

€332.49 €417.99

-€85.50

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — Exhaust 255°, Intake 240°

Broad power band for modified and stock 96\", 103\" and 110\" engines.

Smooth cam-lobe design for quiet valvetrain operation.

Made in the USA; performance pushrods, lifters and clutch recommended.

€332.49 €417.99

-€32.67

FEULING OIL PUMP CORP. Camshaft Installation Kit — 2060

Complete camshaft installation kit with gaskets, bearings, fasteners, and O-rings.
Includes quick change gasket kit and hardened washers.
Precision bearings and ARP® hardware for secure assembly.
Made in the USA.

€127.03 €159.70

Camshaft Installation Kit — Model Standard, Vendor Part Number 2070

-€22.50

FEULING OIL PUMP CORP. Camshaft Installation Kit — Model Standard, Vendor Part Number...

Complete kit with roller bearings, ARP® bolts, gaskets and hardware to install bolt-in and high-lift camshafts.

€87.50 €110.00

-€5.78

FEULING OIL PUMP CORP. Pressure Relief Kit — FEULING PARTS 8002

Increases relief valve pop-off psi; kit includes valve plunger, spring and roll pin; spring controls pop-off pressure and oil flow; made in the USA.

€22.45 €28.23

Reaper® 525 Cam — 525 Series, 236° exhaust, 226° intake, 0.535" exhaust lift, 0.525" intake lift

-€85.50

FEULING OIL PUMP CORP. Reaper® 525 Cam — 525 Series, 236° exhaust, 226° intake,...

Bolt-in camshaft that broadens the torque band, improves fuel economy and boosts low- and mid-range power; compatible with factory valve springs, pushrods and lifters.

€332.49 €417.99

-€382.08

FEULING OIL PUMP CORP. HP+® Camchest Kit — Chain drive

Complete camchest overhaul kit that lowers engine and oil temperatures, increases oil pressure and improves smoothness and reliability. Includes high-volume oil pump, Reaper® camshafts, hydraulic roller lifters, Timken® bearings and ARP® fasteners. Fits '07-'17 Twin Cam and '06 Dyna.

€1,485.86 €1,867.94

-€38.82

FEULING OIL PUMP CORP. Camshaft Installation Plus Kit

Complete camshaft installation kit with gaskets, bearings, ARP® bolts, and service seals. Made in the USA.

€150.98 €189.80

-€33.81

FEULING OIL PUMP CORP. Camshaft Installation Plus Kit — Plus, Camshaft

Complete camshaft and top-end installation kit with quick-change and top-end gasket sets, bearings, ARP® bolts and installation compounds. Made in the USA.

€131.45 €165.26

-€29.41

FEULING OIL PUMP CORP. Camshaft Installation Plus Kit — Camshaft, Kit

Complete camshaft installation kit with gasket sets, roller bearings, Koyo Torrington® needle bearings, 12-point ARP® bolts, moly paste and Loctite®.

€114.38 €143.79

-€85.50

FEULING OIL PUMP CORP. Reaper® Conversion Chain Drive Camshaft — 525 Series

Hybrid conversion camshaft; bolt-in for stock 88" and 96" engines. Broadens torque band, improves throttle response, 1750–5500 rpm.

€332.49 €417.99

-€85.50

FEULING OIL PUMP CORP. Reaper® 543 Cam — 543 Series, fits 88–103 cu in engines

More power than 525 cams without losing low-end torque
Smooth, quiet valve train with refined cruise power band
Bolt-in for stock to mid 96" and 103" engines; responds well to compression, exhaust, and air-flow upgrades

€332.49 €417.99

-€67.15

ARLEN NESS 10 Gauge Cam Cover — Anodized Titanium

Direct-fit replacement cam cover; precision-machined forged alloy; includes gaskets and hardware.

€261.10 €328.25

-€73.86

ARLEN NESS 10 Gauge Cam Cover — 6061 T-6 aluminum, black anodized

Direct-fit cam cover machined from forged aluminum; replaces OEM die-cast cover and includes gaskets and hardware.

€287.24 €361.10

10 Gauge Cam Cover — 6061 T-6 aluminum, anodized titanium

-€73.86

ARLEN NESS 10 Gauge Cam Cover — 6061 T-6 aluminum, anodized titanium

Direct replacement cam cover; precision-machined and supplied with gaskets and hardware.

€287.24 €361.10

-€47.04

ARLEN NESS 10 Gauge Lifter Block Covers — Black anodized

Precision-machined lifter block covers with plated hardware; supplied as a matched set for both sides of the engine.

€182.93 €229.97

10 Gauge Lifter Block Covers — Anodized Titanium, 6061-T6 billet aluminum, Pair

-€46.55

ARLEN NESS 10 Gauge Lifter Block Covers — Anodized Titanium, 6061-T6...

Precision-fit lifter block covers with included chrome hardware; bolt-on installation.

€181.06 €227.61

-€92.57

FEULING OIL PUMP CORP. Reaper® 505/515 Cam — Split lift, Exhaust 248°, Intake 239°

Wide, rideable powerband for stock engines.

Split lift character with top fuel sound.

Use with stock pushrods and valve springs; lifter change recommended.

€360.00 €452.57

-€123.09

ARLEN NESS 10 Gauge Rocker Box Top Covers — Anodized Titanium

Precision CNC-machined top covers that replace OEM pieces and update engine styling; includes gaskets and hardware.

€478.73 €601.82

-€35.45

FEULING OIL PUMP CORP. Camshaft Installation Kit — Part 2058

Complete camshaft installation kit with gaskets, bearings, bolts and seals for full cam and crank service. Made in the USA.

€137.85 €173.30

-€152.86

ARLEN NESS 10 Gauge Rocker Box Top Covers — Pair, Black anodized

Precision CNC-machined top plates that update engine appearance. Includes gaskets and mounting hardware. Direct OEM replacement.

€594.43 €747.29

-€43.40

FEULING OIL PUMP CORP. Camshaft Installation Plus Kit — Model Plus, P/N 2059

Complete installation kit with gaskets, bearings, and ARP® hardware for reliable camshaft assembly.

€168.76 €212.16

-€156.67

ARLEN NESS 10 Gauge Rocker Box Top Covers — Anodized Titanium

Precision CNC-machined top engine covers. Direct OEM replacement; includes gaskets and hardware. Sold as a pair.

€609.30 €765.97

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine