Engine

High Flow Camplate — High Flow, Gear Drive, Chain Drive, 7075 Billet Aluminum

-€86.08

FEULING OIL PUMP CORP. High Flow Camplate — High Flow, Gear Drive, Chain Drive, 7075...

Improves oil circulation by matching camplate and case portholes, increases oil volume and cooling, includes bearing and retainer hardware. For use only with Feuling® oil pumps.

€334.76 €420.84

Cam Set for Chain Drive — 21 Series grind, chain drive

-€83.75

ANDREWS Cam Set for Chain Drive — 21 Series grind, chain drive

Precision-machined alloy-steel cam set for chain drive applications. Made in the USA. Installer must verify coil bind and valve-to-valve and valve-to-piston clearances.

€325.69 €409.44

-€83.75

ANDREWS Cam Set for Chain Drive — Intake & Exhaust, 26 Series

Computer-designed cam set made from alloy steel billets with heat-treated finish; made in the USA. Installer must verify clearances prior to installation.

€325.69 €409.44

-€83.75

ANDREWS Cam Set for Chain Drive — 31 Series, Intake & Exhaust

Precision-machined valvetrain kit from alloy steel billets with computer-designed lobe profiles. Made in the USA. Installer must verify clearances.

€325.69 €409.44

-€56.72

SW-MOTECH Engine Guard — Black

The Engine Guard provides essential underbody protection for your Harley-Davidson against rock chips and collisions. It features easy installation with no modifications needed, ensuring a perfect fit.

€220.59 €277.31

-€83.75

ANDREWS Cam Set for Chain Drive — 37 Series, P/N 216337, Pair

Computer-designed alloy steel cam set, heat treated and made in the USA. Installer must verify coil bind and valve clearances.

€325.69 €409.44

Cam Set for Chain Drive — 50 Series, Intake 248° / Exhaust 252°, .510" lift, Pair

-€62.77

ANDREWS Cam Set for Chain Drive — 50 Series, Intake 248° / Exhaust...

Computer-designed cam set made from alloy steel billets with precise heat treatment. Made in the USA. Installer must verify coil bind and valve clearances.

€244.18 €306.95

-€83.75

ANDREWS Cam Set for Chain Drive — 55 Series grind, P/N 216355, Pair

Computer-designed, heat-treated alloy-steel cam set made in the USA. Installer must verify clearances and coil bind before installation.

€325.69 €409.44

Conversion Chain Driven Cam — N Series, Chain Conversion, Pair

-€81.68

ANDREWS Conversion Chain Driven Cam — N Series, Chain Conversion, Pair

Upgrades '99-'06 Twin Cam (except '06 Dyna Glide) to roller-style cam chains and replaces spring adjusters with hydraulic ones. Requires additional parts and clearance checks.

€317.65 €399.33

Conversion Chain Driven Cam — N Series, Chain Conversion

-€62.56

ANDREWS Conversion Chain Driven Cam — N Series, Chain Conversion

Upgrades '99-'06 Twin Cam (except '06 Dyna Glide) to roller-style cam chains and hydraulic adjusters. Required component list included; parts sold separately. Made in USA.

€243.39 €305.95

Conversion Chain Driven Cam — N Series, 26 Series grind, Chain Conversion

-€83.51

ANDREWS Conversion Chain Driven Cam — N Series, 26 Series grind, Chain...

Upgrades '99-'06 Twin Cam engines (except '06 Dyna Glide) to roller-style cam chains and replaces spring-tension adjusters with hydraulic adjusters. Requires '07-'17 cam plate, oil pump, cam sprockets, chains and both hydraulic adjusters (sold separately). Made in the USA.

€324.80 €408.31

-€83.90

ANDREWS Conversion Chain Driven Cam — N Series, Chain conversion

Upgrades '99–'06 Twin Cam (except '06 Dyna Glide) to roller-style cam chains and replaces spring-tension adjusters with hydraulic adjusters. Required additional components are not included. Made in the USA.

€326.31 €410.21

Roller Conversion Cam Sprocket — 34 teeth, for 99–01 & 02–06 Twin Cam engines (requires trigger ring for 99–01), ANDREWS 216015

-€20.40

ANDREWS Roller Conversion Cam Sprocket — 34 teeth, for 99–01 & 02–06...

34-tooth roller conversion cam sprocket for Twin Cam conversion chain-driven cams. Trigger ring required for 1999–2001 engines; 2002–2006 engines compatible with stock rear cam drive sprocket. Made in USA.

€79.34 €99.74

Cams for Gear Drives — 37 Series grind, Intake 236°, Exhaust 240°, Pair

-€71.77

ANDREWS Cams for Gear Drives — 37 Series grind, Intake 236°, Exhaust...

Computer-designed alloy-steel cams with heat treatment; made in USA. Four-gear set required. Installer must verify coil bind and clearances.

€279.18 €350.95

-€11.05

ANDREWS Cam Installation Kit — ANDREWS, 288901

Complete kit with gaskets, bearings and hardware required for installing gear-driven cams. Made in the U.S.A.

€42.99 €54.04

Camshaft/Sprocket Thrust Washer Alignment Kit — 1999–2006 fitment, front 0.100", rear 0.110–0.150"

-€15.08

FEULING OIL PUMP CORP. Camshaft/Sprocket Thrust Washer Alignment Kit — 1999–2006...

Aligns the rear cam sprocket to the crank sprocket for correct chain alignment. Includes front thrust washer 0.100" and rear alignment washers 0.110", 0.120", 0.130", 0.140", 0.150".

€58.80 €73.88

-€50.69

ANDREWS B2 Grind Cam — Exhaust close 25°

More mid-range and high-end power with a smooth idle. Best for 74/80 inch and small stroker engines. Requires spring spacing and main bearing boss clearance check.

€197.15 €247.84

-€6.12

FEULING OIL PUMP CORP. Camplate Pressure Relief Spring — 6-pack

Increases pressure relief valve pop-off psi. Spring alone provides the correct spring rate to control pop-off pressure and oil flow in the bypass port. Made in the United States.

€23.81 €29.93

Tracker Series™ Piston Kit — 3.875" bore, 4.000" stroke, 1546 cc, 9.5:1

-€68.28

WISECO Tracker Series™ Piston Kit — 3.875" bore, 4.000" stroke, 1546...

Forged pistons with ArmorGlide® skirt coating, precision-fit rings, force-fed pin oiling and pressure-seal groove; value-packed kit with pins and circlips.

€193.19 €261.47

-€68.28

WISECO Tracker Series™ Piston Kit — Bore 3.885" +0.010", Stroke 4.000"

Forged aluminum piston kit with ArmorGlide® skirt coating. Includes two pistons, rings, piston pins and circlips for reliable, quiet operation.

€193.19 €261.47

Tracker Series™ Piston Kit — Bore 3.895", Oversize +0.020", Stroke 4.000", 1562 cc, 9.5:1

-€68.28

WISECO Tracker Series™ Piston Kit — Bore 3.895", Oversize +0.020",...

Complete two-piston kit with precision-fit rings and enhanced pin oiling for dependable sealing and long life.

€193.19 €261.47

Tracker Series™ Piston Kit — Bore 3.875", Displacement 1691 cc, Compression 10.5:1

-€68.28

WISECO Tracker Series™ Piston Kit — Bore 3.875", Displacement 1691...

Forged, precision-fit piston kit with ArmorGlide® skirt coating and force-fed pin oiling. Value-pack includes two pistons, rings, pins, and circlips.

€193.19 €261.47

Tracker Series™ Piston Kit — 3.885" bore, 4.375" stroke, 10.5:1 compression, 1700 cc

-€68.28

WISECO Tracker Series™ Piston Kit — 3.885" bore, 4.375" stroke,...

Forged aluminum piston kit with ArmorGlide® skirt coating; includes two pistons, rings, piston pins and circlips for a complete install.

€193.19 €261.47

Reaper® 525 Cam — 525 Series grind, Intake 0.525" lift, Exhaust 0.535" lift

-€85.50

FEULING OIL PUMP CORP. Reaper® 525 Cam — 525 Series grind, Intake 0.525" lift,...

Bolt-in camshaft upgrade that broadens low- and mid-range torque, improves throttle response and enhances fuel economy.

€332.49 €417.99

Tracker Series™ Piston Kit — Bore 3.895", Oversize +0.020", Stroke 4.375", Compression 10.5:1

-€68.28

WISECO Tracker Series™ Piston Kit — Bore 3.895", Oversize +0.020",...

Forged aluminum piston kit with ArmorGlide® skirt coating; includes two pistons, rings, piston pins and circlips.

€193.19 €261.47

Tracker Series™ Piston Kit — 3.498" bore, 3.812" stroke, 1200 cc, 9.5:1

-€57.15

WISECO Tracker Series™ Piston Kit — 3.498" bore, 3.812" stroke, 1200...

Durable forged pistons with ArmorGlide® skirt coating, precision-fit rings and force-fed pin oiling. Value-pack kit with pins and circlips. Made in the USA.

€161.68 €218.83

$Reaper® Camshaft 574 Series — fits 96\", 103\", 110\" engines$

-€85.50

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — fits 96\", 103\", 110\" engines

Broad midrange power band camshaft with a smooth lobe design. Made in the USA. Performance pushrods, lifters and clutch recommended.

€332.49 €417.99

Tracker Series™ Piston Kit — Bore 3.508", Oversize +0.010", Stroke 3.812", 1207 cc

-€105.66

WISECO Tracker Series™ Piston Kit — Bore 3.508", Oversize +0.010",...

Forged pistons with generous valve pockets, precision-fit rings, force-fed pin oiling, pressure-seal groove and a low-friction skirt coating. Kit includes two pistons, rings, piston pins and circlips. Made in USA.

€113.18 €218.84

Reaper® Camshaft 574 Series — 255° exhaust, 240° intake, 0.574" lift

-€85.50

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — 255° exhaust, 240° intake,...

Power band for modified engines; bolt-in for stock 96", 103" and 110" engines. Smooth cam-lobe design. Made in the USA.

€332.49 €417.99

Tracker Series™ Piston Kit — 3.518" bore, 3-13/16" stroke, 1214 cc

-€105.65

WISECO Tracker Series™ Piston Kit — 3.518" bore, 3-13/16" stroke,...

Two-piston kit engineered for strong sealing, improved lubrication and reduced friction. Includes pistons, rings, pins and circlips. Made in the USA.

€113.18 €218.83

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine